-
Adams AQT SERIES - page 1
Adam Equipment AQT SERIES (P.N. 4328, Rev. B3., January 2008) © Adam Equipment Company 2006 ...
-
Adams AQT SERIES - page 2
CONTENTS 1.0 INTRODUCTION ............................................................................................................ 2 2.0 SPECIFICATIONS ......................................................................................................... 3 3.0 SAFETY PRECAUTIONS ............................................................... ...
-
Adams AQT SERIES - page 3
1.0 INTRODUCTION The AQT seri es includes an economi cal range of balances t ailored for varied weighing applications. The mai n features are as follows. • Runs using battery or AC Adapter supplied as standard • Auto power off to save the battery • Low battery indicator • Net weight/stability indication • Auto zero tracking • Various we ...
-
Adams AQT SERIES - page 4
2.0 SPECIFICA TIONS Model # AQT-200 AQT- 250 AQT-600 AQT-1500 AQT-2000 AQT-5000 Maximum Capacity 200g 250g 600g 1500g 2000g 5000g Readability 0.01g 0.1g 0.1g 0.1g 1g 1g Resolution 1:20,000 1: 2500 1:6000 1:15,000 1:2000 1:5000 Repeatability (Std Dev) 0.02g 0.1g 0.1g 0.2g 1g 1g Linearity ± 0.02g 0.1g 0.1g 0.2g 1g 1g Units of Measure g/ct./ oz/ dwt/ ...
-
Adams AQT SERIES - page 5
3.0 SAFETY PRECAUTIONS All safety messages are identif ied by the following words " WARNING " and "CAUTION". These words mean the following: WARNING Important information to alert you to a situation that might cause serious injury and damage to your property if instructions are not followed. CAUTION Important inform ation that t ...
-
Adams AQT SERIES - page 6
4.0 P ARTS DESCRIPTION BEHIND AC adapter socket TOP Stainless Steel pan Platform LCD display [On/Off] key Turns the balance powe r on/off [Unit] key Changes weighing u nits. Also used when calibrating [Tare] key Sets display to zero or tares the balance BOTTOM Battery compartment Battery compartment cover Batteries are not included DISPLAY ZERO ind ...
-
Adams AQT SERIES - page 7
5.0 PREP ARA TION 5.1 SETTING UP THE BALANCE CAUTION • Avoid installing the balance in direct sunlight that may cause poor performance or malfunctions. • Place the balance on a firm weighing table so that the balance is levelled. The balance will not perf orm accurately when it is not levelled. • Level by adjusting the feet to cent re the bub ...
-
Adams AQT SERIES - page 8
6.0 WEIGHING 6.1 BEFORE WEIGHING Be aware of the Automatic power-off f unction. If the Automatic power-off function is active it will turn the balance off after 2 minutes of inactivity. 6.2 WEIGHING PROCEDURES • Press [On/Off] to turn on the balance. When power is turned on, all displa y segments appear on LCD for a few seconds and finally on the ...
-
Adams AQT SERIES - page 9
7.0 SETTING OF FUNCTIONS 7.1 ENTER FUNCTION SETTI NG MODE • Press [On/Off] to turn the power off. • Press [Tare] first, then press [On/Off] , while keeping [Tare] pressed. The display will show " A-On " or " A-OFF ". 7.2 SELECTI ON OF AUTO SHUT OFF MODE • When the display shows " A-On " or " A-OFF " pre ...
-
Adams AQT SERIES - page 10
7.3 UNITS SELECTION (FOR AQT 200 ONLY) • Next press [Unit] to enter the units selectio n mode, the display will show " On ct ". • Press [Tare] to select On or OFF . On means this weighing unit is enabled, O F F means this unit is disabled. • Press [Unit] to go to the next weighing unit. The following weighing units can be selected i ...
-
Adams AQT SERIES - page 11
8.0 CALIBRA TION • Calibration may be required when the bal ance is initially installed or if the balance is moved fr om a location. • With time and use, mechanical deviations may o ccur. Therefore calibrate the balance whenever th e best accuracy is required or when any deviation is ob served during weighing a test weight. • Before calibrati ...
-
Adams AQT SERIES - page 12
8.2 AUTO CALIBRATION FOR ALL OTHER MODELS • Before entering calibration mode, press [On/Off] to turn the power on for 1 minute. Enter calibration mode • Press [On/Off] to turn the power off. • Press [Unit] first and then press [On/Off] , while keeping the [Unit] key pressed. The display will show the last calibration value used (For example, ...
-
Adams AQT SERIES - page 13
10.0 REPLACEMENT P ARTS AND ACCESSORIES If you need to order any spare parts a nd accessories, contact your supplier or Adam Equipment. A partial list of such items is as follo ws- • Power Suppl y Adapter • In use cover • Stainless Steel Pan 1 1.0 SER VICE INFORMA TION This manual covers the details of operatio n. If you have a probl em with ...
-
Adams AQT SERIES - page 14
WARRANTY INFORMATION Adam Equipment offers Limited Wa rranty (Parts and Labour) for the components failed due to defects in ma terials or workmanship. Warranty starts from the date of delivery. During the warranty period, should an y repairs be necessary, the purchaser must inform its supplier or Adam Equipment Company. The company or its authorise ...
-
Adams AQT SERIES - page 15
Manufacturer’s Declaration of Con formity This product has been m anufactured in accorda nce with the harmonised European sta nda rds, following the provisions of the below stated directives: Electro Magnetic Compatibility Directive 89/336/EEC Low Voltage Directive 73/23/EEC Adam Equipment Co. Ltd. Bond Avenue, Denbigh East Milton Keynes, MK1 1SW ...
-
Adams AQT SERIES - page 16
ADAM EQ UIPMENT is an ISO 9001:2000 certified global company with more than 35 years experience in the production and sale of electronic weighing equip ment. Adam products are predominantly designed for the Laboratory, Educational, Medical, retail and Industrial Segments. The product range can be d escribed as follows: -Analytical and Precision Bal ...
¿Tienes una pregunta acerca de Adams AQT SERIES?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Adams AQT SERIES, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Adams AQT SERIES probablemente compartirá una forma de solucionarlo.