-
AEG DD9693-M - page 1
DD9663-M UK DD9693-M UK Cooker Hood Operating and Installation Instructions ...
-
AEG DD9693-M - page 2
2 For the User Important Safety Information Y our Appliance Operating Instructions Cooker Hood Controls T o Operate Recirculation Extraction Maintenance and Cleaning External Cleaning Metal Grease Filter T o Remove the Grease Filter Cassette Charcoal Filter T o Remove/Replace the Charcoal Filter Worktop Lighting Replacing the Light Bulb Something N ...
-
AEG DD9693-M - page 3
3 Installation • Any installation work must be undertaken by a quali - ed electrician or competent person. • This hood must be installed in accordance with the installation instructions and all measuremen ts adhered to. • If the cooker hood is installed for use above a gas appliance then the provision for ventilation must be in accordance ...
-
AEG DD9693-M - page 4
4 YOUR APPLIANCE ...
-
AEG DD9693-M - page 5
5 OPERA TING INSTRUCTIONS This cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam . Key Function Display A T urns the Lighting System on and off. On or Off B T urns the Motor on and off. On or Off C Activates speed one. On. D Activates speed two. On. E Activates speed three. On. F Activates intensive sp ...
-
AEG DD9693-M - page 6
6 This cooker hood can be used to recirculate or extract contaminated air . Recirculation Mode The cooker hood is supplied specied for use in the recir - culation mode with the charcoal lter tted. The contaminated air is cleaned by passing through the lters and than back into the kitchen. The activated charcoal lter absorbs odours ar ...
-
AEG DD9693-M - page 7
7 MAINTENANCE AND CLEANING Before car r ying out any maintenance or lean- ing isolate the cooker hood fr om the mains supply . The cooker hood m ust be kept clean, as a build up of grease or fat can be a fir e hazard. External Cleaning The metal casing, grille and chimney shoul d be cleaned at least once a month to keep it looking like new . Wipe o ...
-
AEG DD9693-M - page 8
8 MAINTENANCE AND CLEANING Alarm signal reset • T urn the Lights and the Suction motor off. • Press button H and hold for at least 2 seconds, conrmation is provided by the fact that the Led goes out. Before car r ying out any maintenance or cleaning isolate the cooker hood fr om the mains supply . Charcoal Filters In the recirculation mode t ...
-
AEG DD9693-M - page 9
9 Changing the Halogen Spot Lamp • Extract the lamp from the lamp holder by pulling gently . • Replace with another of the same type, making sure that the two pins are properly inserted in the lamp holder socket holes. Replacement filters and light bulbs can be obtained from y our local Service Force Centr e. MAINTENANCE AND CLEANING ...
-
AEG DD9693-M - page 10
10 SOMETHING NOT WORKING SERVICE AND SP ARE P ARTS If, having followed these instructions carefully , your cooker hood fails to work properly please carry out the following checks. Symptom The cooker hood will not start The cooker hood is not working effectively The cooker hood has switched off during operation I f after all these checks, the probl ...
-
AEG DD9693-M - page 11
11 GUARANTEE CONDITIONS Standard Guarantee Conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG built-in appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option, repair or replace the same FREE OF ANY CHARGE for labour , materia ...
-
AEG DD9693-M - page 12
12 INST ALLA TION INSTRUCTIONS Itisdangeroustoalterthespecicationsorattempttomodifythisproductinanyway . T echnical Information DIMENSIONS HEIGHT (CANOPY): 270 mm HEIGHT (CHIMNEY): 500-330 mm WIDTH (CANOPY): 698 - 898 mm WIDTH (CHIMNEY): 300 mm GROSS: 26 kg - 28 kg NET : 17 kg - 20 kg ELECTRICAL S ...
-
AEG DD9693-M - page 13
13 INST ALLING THE COOKER HOOD Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. Allinstallationsmustcomplywiththe local authoritiesrequirementsforthedischargeof exhaustair . Incorrectinstallationmayaffectthesa ...
-
AEG DD9693-M - page 14
14 INST ALLA TION INSTRUCTIONS W all drilling and bracket xing W all marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • Draw a horizontal line at 650 mm above the hob. • Place bracket 7.2.1 on the wall as shown about 1-2 mm from ...
-
AEG DD9693-M - page 15
15 Hood body mounting • Before attaching the hood body , tighten the two screws V r located on the hood body mounting points. • Hook the hood body onto the screws. • Fully tighten support screws. • Adjust screws V r to level the hood body . Chimney assembly Upper exhaust ue • Slightly widen the two sides of the upper ue and hook the ...
-
AEG DD9693-M - page 16
436004092_02 - 080826 The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly , you will help prevent potential negati ...
¿Tienes una pregunta acerca de AEG DD9693-M?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con AEG DD9693-M, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con AEG DD9693-M probablemente compartirá una forma de solucionarlo.