-
PYLE Audio PLPK5TVD - page 1
PLPK5TVD OWNER’S MANUAL COLOUR LCD TV/RECEIVER ...
-
PYLE Audio PLPK5TVD - page 2
2 INST ALLA TION Notes: • Choose the mounting location where the unit will not interfer e with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sur e it is all connected up properly and the unit and the system work pr operly . • Use only the parts included with the unit ...
-
PYLE Audio PLPK5TVD - page 3
3 MOUNTING THE TUNER UNIT 1. Bracket (A) 5. T apping Screw with W asher (M5 x 12) 2. Mounting Bolt (M5 x 5) 6. Spring W asher (M6) 3. Bracket (B) 7. Spring W asher (M5) 4. Hexagonal Bolt with W asher (M6 x 12) 8. Double Sided T ape INST ALL THE DISPLA Y UNIT Before install the display unit, please r emove its tail screw and cable parts. This unit c ...
-
PYLE Audio PLPK5TVD - page 4
4 (Fig. 2) 1 2 7 5 4 3 6 1 2 3 5 2 5 4 1 1. Dashboard 2. Nut (M5) 3. Spring W asher 4. T apping Screw with W asher (M5 x 25) 5. Screw 6. Plain W asher 7. Strap Be sure to use the strap to secur e the back of the unit in place. The strap can be bent by hand to the desired angle. Removing the unit 1. Lever Insert the levers supplied with the unit int ...
-
PYLE Audio PLPK5TVD - page 5
HOW TO OPEN AND CLOSE THE SCREEN DISPLA Y 1. Pr ess release button to draw out the scr een display . 2. T ur ning the display upward. 3. Adjusting the viewing angle. Angle should be adjusted slowly without applying unreasonable for ce. Release Button 5 ...
-
PYLE Audio PLPK5TVD - page 6
6 4. T ur ning the display downward. Make sur e to return the display to centre position before drawing in. It cannot be draw in with its angles adjusted. 5. Push the panel, the display will be drawn in. ...
-
PYLE Audio PLPK5TVD - page 7
7 ELECTRICAL CONNECTION RADIO/TV MAIN UNIT (VIEW FROM REAR) TV DIVERSITY ANTENNA INPUT GREY TV CONTROL GREY/BLACK TV DIVERSITY ANTENNA INPUT RADIO ANTENNA INPUT BLUE/WHITE POWANT REAR Rch SPK VIOLET VIOLET/BLACK FRONT Rch SPK GREY GREY/BLACK REAR Lch SPK GREEN GREEN/BLACK FRONT Lch SPK WHITE WHITE/BLACK TO POWER SUPPL Y RED ACC YELLOW MEMORY BLACK ...
-
PYLE Audio PLPK5TVD - page 8
OPERA TION 18 21 22 17 1 23 4 20 9 10 19 8 15 4 12 3 14 6 8 5 1 11 7 16 2 13 24 ...
-
PYLE Audio PLPK5TVD - page 9
GENERAL OPERA TION • ON/OFF Switch on the unit by pressing PWR button (1). When system is on, pr ess it again to turn it off. • F ACEPLA TE RELEASE Press REL button (2) to draw out the faceplate, push the panel to draw in. When the faceplate is drawn out, turn the faceplate upward and adjust TV display . • SELECTING SOUND MODE Press SEL butto ...
-
PYLE Audio PLPK5TVD - page 10
Time Setting - Set hours: Holding down T/F button (5) for several seconds, and the clock is blinking on the display , press button (14) to adjust the hour . - Set minutes: Holding down T/F button (5) for several seconds, and the clock is blinking on the display , press button (13) to adjust the minutes. • LIQUID CR YST AL DISPLA Y The LCD (4) can ...
-
PYLE Audio PLPK5TVD - page 11
11 RADIO OPERA TION • SELECTING BAND Press BAND button (11) to change between three FM bands and two AM bands. Each band stores up to six pr eset stations. • SELECTING STATION During radio mode, press MAN/SKP button (13) to incr ease frequency or (14) to decrease fr equency by one step of channel spacing. Hold the button longer for fast tuning. ...
-
PYLE Audio PLPK5TVD - page 12
12 TV OPERA TION • SELECTING RECEIVING MODE Press TV/A V button (17) to select among TVch/A V1/AV2 . • SELECTING CHANNEL Press CH+ button (9) or CH – button (10) to choose channel upwar d or downward • MENU CONTROL In TV mode Press MENU button (18) to switch the MENU CONTROL mode. And the main menu includes three sub-menus: PICTURE MENU, TU ...
-
PYLE Audio PLPK5TVD - page 13
13 Note: When you set the color mode to “ PA L ” in SYSTEM MENU, there is no “ TINT ” item to display . In this menu, the range of setting value is 00~63, and the recommended range of these values are listed below: BRIGHT : 10~32 CONTRAST : 20~40 COLOR: 40~50 SHARP: 63 TINT : 10 TUNER MENU --POSITION -- POSITION setup Y ou can use numeric b ...
-
PYLE Audio PLPK5TVD - page 14
14 --BAND-- BAND setup Y ou can use CONTROL+ button (19) or CONTROL – button (20) to switch between UHF , VHFL and VHFH band. --FINE-- FINE setup When the frequency has warp, and the pictur e displayed unstable, you can use CONTROL+ button (19) or CONTROL – button (20) to start FINE function to adjust it. --AFT -- AFT (Auto Frequency T race) se ...
-
PYLE Audio PLPK5TVD - page 15
15 --SEARCH-- SEARCH setup Use CONTROL+ button (19) or CONTROL – button (20) to start manual station search. And it will start fr om the band you select in BAND setup. The SKIP and AFT two items will be set automatically . --ASM-- ASM (Auto Search Memory) setup Use CONTROL+ button (19) or CONTROL – button (20) to start auto station sear ch. The ...
-
PYLE Audio PLPK5TVD - page 16
16 COLOR setup Use CONTROL+ button (19) or CONTROL – button (20) to switch color mode among AUTO, P AL, N3.58 and N4.43. --SOUND-- SOUND setup Use CONTROL+ button (19) or CONTROL – button (20) to switch sound mode among M, B/G, I and D/K. --LANG.-- LANG. (Language) setup Use CONTROL+ button (19) or CONTROL – button (20) to switch between ENGL ...
-
PYLE Audio PLPK5TVD - page 17
17 --CORING-- CORING setup Use CONTROL+ button (19) or CONTROL – button (20) to switch between ON and OFF . When the coring function is on, it can effectively decease the picture noise and improve the image quality . --HALFTONE-- HALFTONE setup Use CONTROL+ button (19) or CONTROL – button (20) to switch the menu background between ON and OFF . ...
-
PYLE Audio PLPK5TVD - page 18
18 • PROGRAM SCANNING Press SCAN button (22), “ SCAN OFF ” will display on the lower left corner of the screen. Pr ess it again, the screen will display “ SCAN ON ” , then it begins to scan 1.5 seconds of each channel in sequence. When it completes, the screen will display “ SCAN OFF ” . In the course of scanning, press SCAN button (2 ...
-
PYLE Audio PLPK5TVD - page 19
19 REMOTE CONTROL HANDSET 2 11 8 9 10 16 5 6 7 14 13 15 12 17 4 3 1 CONTROL & FUNCTION KEYS 1. POWER = Press POWER to turn the unit ON or OFF 2. TV/A V = Switch between TV/A V1/AV2 3. 0 - 9 = Numeric buttons, press to select the corr esponding channel 4. -/-- = Digital selecting button, cooperatively used with numeric buttons 5. MUTE = Press to ...
-
PYLE Audio PLPK5TVD - page 20
SPECIFICATION GENERAL P o wer Supply V oltage : DC 12 V olts, Negative Ground Maximum P o wer : 4 x 60 W atts Load Impedance : 10 Ampere (max.) Tone Controls - Bass (at 100 Hz) : + / – 10 dB - T reble (at 10 KHz) : + / – 10 dB TV Monitor Screen Size : 5.0 ” TFT Resolution : 960 x 234 dots TV Sensitivity : 45 dB µ V/PD (max.) @CH25 in average ...
¿Tienes una pregunta acerca de PYLE Audio PLPK5TVD?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con PYLE Audio PLPK5TVD, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con PYLE Audio PLPK5TVD probablemente compartirá una forma de solucionarlo.