-
AT&T 1717 - page 1
F old open this manual f or inf ormation about this pr oduct’s installation and oper ation. Please r ead Part 1 – Important Product Information, included in this package. User ’ s Manual for T apeless Digital Ans w ering System with Time/Da y 1717 1 Part 2 © 1998 Lucent T ec hnolog ies Consumer Products L.P . All r ights reser ved. Printed i ...
-
AT&T 1717 - page 2
INST ALLA TION 3 Connect the power cord. Plug the power cor d into the jack labeled POWER and into an electrical outlet not controlled by a wall s witch. Fit the pow er cord behind the strain relief tab. The Message Window f lashes C to indicate that y ou need to set the clock. Use only the pow er cord supplied with this product. If you need a repl ...
-
AT&T 1717 - page 3
OPERA TION Set and hear time/day Use with other buttons to change/hear settings Tur n system on or off Setting the Clock Y ou’ ll need to set the clock so that it can announce the da y and time that each messag e is received. Press P to e xit Setting the Clock at any time. 1 Press and hold C until the Message W indow displays C , and the default ...
-
AT&T 1717 - page 4
Ans w ering Calls When the system ans wer s a call, the caller hears the announcement you recorded, follo wed by a beep. After the beep, the system begins recording y our caller’ s messag e. A caller can leave a messag e up to three minutes long. If the messa ge is long er than three minutes, or if the caller is silent f or more than seven second ...
-
AT&T 1717 - page 5
OPERA TION Announcement Monitor Y ou can choose whether to hear the announcement when your system ans wers a call, or have it silent (off) on your end (your caller will still hear an announcement). 1 Press and hold S . After the Ring Select setting is announced, continue to press and release S until the system announces “Monitor is on (or of f) ? ...
-
AT&T 1717 - page 6
5 Deleting Messages Delete All Messages After you hav e listened to all messa ges and heard the tw o beeps, press 3 3 . Delete Selected Messages Press and release 3 while the messag e you want to delete is playing. Recor d Announcement 1 Press 7 * , and begin speaking after the beep. 2 Press 5 when you are finished. The system replays y our new ann ...
-
AT&T 1717 - page 7
T urn System Off Press 0 0 . T urn System On When the system is off, it answ ers after 10 rings, announces “ T he machine is of f , ” and beeps twice. 1 Press 0 to turn the system on. 2 The system beeps twice and is read y to ans wer calls and record messages. If the system beeps five times, the memor y is full. REMO TE OPERA TION 6 Memor y Ful ...
-
AT&T 1717 - page 8
If this answ ering system does not work properl y , tr y the following sugg estions. If you’ re still having difficulty , call 1 800 722–9125. Message Windo w Is Blank • Make sure the pow er cord is securely connected to both the ans wering system and an electrical outlet not controlled by a wall s witch. • Press O to make sur e the system ...
-
AT&T 1717 - page 9
fold © 1998 Lucent T echnologies Consumer Products L.P . All rights reser ved. Printed in Mexico. 848230033 Issue 2AT&T 1 T apeless Digital Answ ering System 1717 Remote Commands To connect with your answering system: 1 Dial your telephone number from a touc h tone phone. 2 When the system answ er s, enter your Remote Access Code. The system a ...
-
AT&T 1717 - page 10
ONE KEY REMO TE COMMANDS Play All Play New Delete Repeat Stop/Exit Skip Annc. System On Record Memo TW O KEY REMOTE COMMANDS T urn system off 0 0 Delete all messages 3 3 Review announcement 7 1 Record announcement 7 * , speak after beep, press 5 to stop Room monitor 9 8 , press 8 to speak with someone in the room; press 5 to e xit End remote access ...
-
AT&T 1717 - page 11
OPERA TION Set and hear time/day Use with other buttons to change/hear settings Turn system on or off Adjust volume Delete all or selected messages Displays number of messages and other information Setting the Clock Y ou’ll need to set the clock so that it can announce the day and time that each message is received. Press P to exit Setting the Cl ...
-
AT&T 1717 - page 12
OPERA TION Announcement Monitor Y ou can choose whether to hear the announcement when your system answers a call, or have it silent (off) on your end (your caller will still hear an announcement). 1 Press and hold S . After the Ring Select setting is announced, continue to press and release S until the system announces “Monitor is on (or off)” ...
-
AT&T 1717 - page 13
Limited O ne-Y ear W arranty This pro duct is warran ted by RadioSha ck against ma nufacturing defects in ma terial and workman ship unde r normal use for on e (1) year from the date of purc hase from Ra- dioShack c ompany-o wned stores and author ized Radi oShack franc hisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack M AKES NO EXPRESS W A ...
¿Tienes una pregunta acerca de AT&T 1717?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con AT&T 1717, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con AT&T 1717 probablemente compartirá una forma de solucionarlo.