-
Porter-Cable 7564 - page 1
Double Insulated Portable Electric Drill Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference. Model No. ______________________________________ Type ___________________________________________ Serial No. ________________________________ ...
-
Porter-Cable 7564 - page 2
2 WARNING: SOME DUST CREATED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: · lead from lead-based paints, · crystalline silica from bricks and cement and other masonry products, and · arsenic ...
-
Porter-Cable 7564 - page 3
3 influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. 2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 3. Avoi ...
-
Porter-Cable 7564 - page 4
4 SPECIFIC SAFETY RULES AND SYMBOLS FOR PORT ABLE DRILLS 1. ALWAYS hold drill by the handle(s) ONLY to prevent accidental electrical shock resulting from cutting a live wire when drilling into a wall or other blind areas. 2. DO NOT use bits larger than those recommended. They increase the chance of jamming. Large bits may also overload the drill an ...
-
Porter-Cable 7564 - page 5
........................ direct current n 0 ........................ no load ........................ alternating or direct current ........................ Class II Construction ........................ splash-proof construction ........................ watertight construction …/min ........................ revolutions or reciprocation per minut ...
-
Porter-Cable 7564 - page 6
6 FUNCTIONAL DESCRIPTION FOREWORD Porter-Cable Model 7564 Drill is designed to drill holes of various sizes up to 1 3 / 4 " in wood and 1 / 2 " in metal. INST ALLING AND REMOVING DRILL BIT 1. CAUTION: DISCONNECT TOOL FROM POWER SOURCE. 2. The three-jaw chuck is designed for self-centering of the drill bit. Open chuck jaws by turning outer ...
-
Porter-Cable 7564 - page 7
TO INST ALL AUXILIARY HANDLE An auxiliary handle (C) Fig. 2, is supplied with some models. This handle screws directly into the drill housing providing complete control of the drill. It is strongly recommended that the auxiliary handle be used and tool held as illustrated in Fig. 4 during all drilling operations. OPERA TION TO ST ART AND STOP THE M ...
-
Porter-Cable 7564 - page 8
8 HOW TO USE THE DRILL GENERAL DRILLING 1. Be sure drill bit is securely gripped in chuck. (See INSTALLING AND REMOVING DRILL BIT). 2. Make sure work is held securely in vise or clamped in place prior to starting drilling operation. CAUTION: Loose work may spin and cause bodily injury. 3. Locate exact center for hole to be drilled and using a cente ...
-
Porter-Cable 7564 - page 9
9 The harder the material, the slower the speed required. The softer the material, the faster the speed. 3. When drilling a large hole, it is easier to first drill a smaller hole and then enlarge it to the required size. 4. The use of a lubricant, such as oil, on the drill point helps keep the bit cool, increases drilling action and prolongs drill ...
-
Porter-Cable 7564 - page 10
10 LUBRICA TION This tool has been lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. No further lubrication is necessary. BRUSH INSPECTION AND LUBRICA TION For your continued safety and electrical protection, brush inspection and replacement on this tool should ONLY be performed ...
-
Porter-Cable 7564 - page 11
11 NOTES 903549 - 09-30-01.qxd 2/13/02 9:17 AM Page 11 ...
-
Porter-Cable 7564 - page 12
12 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material du ...
-
Porter-Cable 7564 - page 13
The following are trademarks of PORTER-CABLE • DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marques suivantes sont des marques de fabriquant de la PORTER-CABLE • DELTA): BAMMER ® , LASERLOC ® , OMNIJIG ® , POCKET CUTTER ® , PORTA-BAND ® , PORTA-PLANE ® , PORTER-CABLE ® , QUICKSAND ® , SANDTRAP ® , S ...
¿Tienes una pregunta acerca de Porter-Cable 7564?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Porter-Cable 7564, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Porter-Cable 7564 probablemente compartirá una forma de solucionarlo.