-
Honeywell CT3611 - page 1
69- 1081- 3 OWNER ’ S GUIDE ® U.S. Registered Trademark Copyright © 2001 Honeywell • •All Rights Reserved Honeywell CT361 1 PROGRAMMABLE THERMOSTAT Seven Day Programmable Heat Pump Low V oltage (20 to 30 V ac) Thermostat and W allplate Model CT361 1 Para pedir estas instrucciones en español, llame al 1-800-468-1502. Pour obtenir ce ode dem ...
-
Honeywell CT3611 - page 2
69-1081—3 2 T OTAL COMFORT TEMPERATURE MANAGEMENT WITH SMART RESPONSE™ T E CHNOLOGY . Congratulations! Y ou made a smart choice by purchasing your new Honeyw ell thermostat; the smart thermostat that; • Keeps you comfortable by automatically calculati ng exactly when the heat pump should go on to have the house at the desired comfort temperat ...
-
Honeywell CT3611 - page 3
3 69-1081—3 Time Set Program Run Program Hold Temp Set Current Day/Time Day Heat/Cool Settings Daylight Time Copy Usage System Fan Wake Leave Return Sleep Em Heat Heat Off Cool On Auto M18745 RAISES TEMPERATURE SETTING LOWERS TEMPERATURE SETTING DISPLAYS CURRENT HEAT/COOL TEMPERATURE SETTING PROGRAM PERIODS WAKE/LEAVE/RETURN/SLEEP: ENTERS PROGRAM ...
-
Honeywell CT3611 - page 4
69-1081—3 4 M18756A Aux Ht System Off Auto WakeLeaveReturnSleep Mon Wait In Room Humid Outdoor AM Hold for Recovery Cool Tue WedThuFriSatSun Days Set Program Set Day/Time Temporary Setting Em Em Heat Em Ht DISPLAYS EITHER CURRENT TIME OF DAY OR PROGRAM TIMES SHOWS THERMOSTAT IS IN THE SET DAY/TIME MODE SHOWS TEMPERATURE SETTING CHANGED FOR THIS P ...
-
Honeywell CT3611 - page 5
5 69-1081—3 STEP 1. PREPARE FOR INSTALLATION q This thermostat is designed to work with multistage heat pumps (heat pump s with Auxiliary and/or Emergency Heat). Check T able 1 in S tep 4 to make sure the C T361 1 is compatible with your system. If you have compatibility questions, contact Honeywell at www.honey well.com/yourhome or call the Cust ...
-
Honeywell CT3611 - page 6
69-1081—3 6 STEP 3. MOUNT THERMOSTAT W ALLPLATE q Separate the wallplate from the thermostat by placing your thumb or fingers between the bottom of the wallplate and the thermostat, and pulling the wallplate up and away from the thermostat. See illustration at right. q Position the wallplate on the wall. Level the wallplate for appearance if desi ...
-
Honeywell CT3611 - page 7
7 69-1081—3 STEP 4. WIRE W ALLPLATE T ERMINALS IMPORT ANT All wiring must comply with local codes and ordinances. If unsure about household wiring proc edur es, call your local heat- ing/air-conditioning contractor. Refer to the labels you placed on t he wires wh en you removed the old thermostat (see illustration). q Match the letter of your old ...
-
Honeywell CT3611 - page 8
69-1081—3 8 IMPORTANT If you have any wiring questions, contact Honeywell at www .honeywe ll.com/yourhome or call Honeywell Customer Relations Center , toll-free, 1-800-468-1502. a Never attach wires to both the O and B terminals on the CT361 1. If the old thermostat had wires on both the O and B terminals, be sure to attach the B wire to the CT3 ...
-
Honeywell CT3611 - page 9
9 69-1081—3 STEP 5. MOUNT THE THERMOSTAT STEP 6. CUSTOMIZE Y OUR THERMOSTAT Y our Hone ywell CT361 1 thermostat comes preset to the most co mmonly used settings. The settings are: — Auxiliary and/or Emergency Heat type. — Smart Response™ technology on. — T emperature °F . — 12-hour clock format. Y ou can change any or all of these sett ...
-
Honeywell CT3611 - page 10
69-1081—3 10 q Press and hold down , , and , simult aneously until the screen shows. Y ou now can change any of these settings. Auxiliary Heat T ype (Feature Number 5) Auxiliary Heat options are: — 3 = Hot water , high efficiency furnace (90% or better). — 6 = Gas or oil forced air furnace (p reset). — 9 = Electric heat system. T o change y ...
-
Honeywell CT3611 - page 11
1 1 69-1081—3 T emperature Format (Feature Number 14) T emperature format option s are: — 0 = °F (preset). —1 = ° C . T o change temperature form at: q Press once. q Press T ime to move to next feature or to return to main display . Time Format (Feature Number 16) T ime format options are: — 0 = 12-hour clock (preset). — 1 = 24-hour clo ...
-
Honeywell CT3611 - page 12
69-1081—3 12 q Press until “DST” displays if day light savin gs time is in effect. q Press . STEP 8. PROGRAMMING The keyboard is located behind the thermostat cover . T he three most frequently used keys are near the display . Pressing displays the current temperature settings. Pressing the and keys change the temper ature. The thermostat dis ...
-
Honeywell CT3611 - page 13
13 69-1081—3 T able 2 can be helpful when planning your schedule of time and temperature settings. The thermostat default settings are shown in parentheses ( ). T able 2. Personal Programming T able. a Y our heating setpoints cannot be higher than 90°F (32°C) or lower than 40°F ( 4.5°C). b Y our cooling setpoints cannot be higher than 99°F ( ...
-
Honeywell CT3611 - page 14
69-1081—3 14 NOTE: Program times are in 15 minu te in tervals. For example, 8:00, 8:15, 8:30. q Press or until the desired wake te mperature displays. The setpoint temperature range is 40°F to 90°F (7°C to 31° C) for heating and 45°F to 99°F (9°C t o 37°C) for cooling. q Press to switch between setpoints. NOTE: Program times are the same ...
-
Honeywell CT3611 - page 15
15 69-1081—3 q Press to accept the change. q Repeat these steps for each day you want to copy . NOTE: donE appears for two seconds and then the normal program display appears. Clear a Program Period NOTE: W ake cannot be cleared. q Press , , or for the program period you want to clear . q Press until the desired day displays. q Press and hold the ...
-
Honeywell CT3611 - page 16
69-1081—3 16 Change T emperature Setti ng Indefinitely (Hold) q Move the System switch to the desired position (Heat or Cool). q Press then or to change your setting if desired. (The disp lay changes from showing the setpoint temperature to room temperature after approximately thre e seconds). q T o cancel “Hold” press . Change the T emperatu ...
-
Honeywell CT3611 - page 17
17 69-1081—3 Usage Key q Press once to display the hours and minutes that the heating or cooling system has been operating for the current day . q Press a second time to display the system operati ng time for the previou s day (midnight to midnight). q Press a third time to display the system oper ating time since the last time the usage function ...
-
Honeywell CT3611 - page 18
69-1081—3 18 IF Y OU HAVE A PROBLEM T able 3. Solution Guide. If... Then… Display does not appear . • Make sure the thermostat is mounted and latched on the wall plate. Mount and latch the thermostat on the wallplate if it is not. • Make sure terminal C is connect ed to the system transformer common. • Make sure circuit breaker is not tri ...
-
Honeywell CT3611 - page 19
19 69-1081—3 T oll-Free Customer Assistance Please read and follow the provided instructions for this the rmostat. For additional information, go to www .hone ywell.com/yourhome or call the Honeywell C ustomer Relations Center at 1-800-468-1502. Th e Center hours are Monday through Friday , 7:00 AM to 5:30PM Central Time. Before calling, please h ...
-
Honeywell CT3611 - page 20
69-1081—3 20 SMART RESPONSE™ T ECHNOLOGY Y our CT361 1 is actually a small computer . The Smart Respons e™ tech nology calculates the corr ect time of day to turn on your heating or cooling system. Smart Response technology conside rs the following information. • Air temperature. • W all temperature. • The time of day when you want the ...
-
Honeywell CT3611 - page 21
21 69-1081—3 WIRING DIAGRAMS See T able 1 on page 8 for additional wiring assistance. T ypical hookup of CT361 1 with isolated stage-one heating and cooling connections . 1 POWER SUPPLY. PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED. NEVER ATTACH WIRES TO BOTH THE O AND B TERMINALS. SEE WIR E WALLPLATE TERMINALS SECTION FOR MORE DE ...
-
Honeywell CT3611 - page 22
69-1081—3 22 Notice: This thermostat is a Class B digita l app aratus that complies with C anadian Radio Interfer ence Regulations, CRC c. 1374. Limited One-Y ear W arranty Honeywell warrants this product, excluding battery , to be fr ee from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from ...
-
Honeywell CT3611 - page 23
23 69-1081—3 This warranty gives you specific legal rights, and you may h ave other rights which vary from state to state. If you have any questions concer ning this warranty , p lease write our Customer Relations Center, Honeywell Inc., 1885 Douglas Dr . N., Golden V alley , MN 55422-3992, or call 1-800 -468-1502, Monday-Friday , 7:00 a.m. to 5: ...
-
Honeywell CT3611 - page 24
Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers. 69-1081—3 J.H. Rev . 1 1-01 www .hone ywell.com/yourhome Home and Building Control Home and Building Control Honeywell Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Scarborough, Ontario M1V 4Z9 69-1081.f ...
¿Tienes una pregunta acerca de Honeywell CT3611?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Honeywell CT3611, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Honeywell CT3611 probablemente compartirá una forma de solucionarlo.