Español dropdown-ico

Manual de instrucciones Denon AVR-3313CI

187 de páginas 39.2 mb
Descargar

Pasar a la página of 187

Summary
  • Denon AVR-3313CI - page 1

    A VR-3313CI INTEGRA TED NET W ORK A V RECEIVER Owner ’ s Manual Basic version Adv anced version Infor mations DVD ...

  • Denon AVR-3313CI - page 2

    I n SAFETY PRECAUTIONS CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence ...

  • Denon AVR-3313CI - page 3

    II n NO TES ON USE WARNINGS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust. • Unplug the power cord when not using the unit for long periods of time. • Do ...

  • Denon AVR-3313CI - page 4

    1 Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Getting started Basic version ························································ ...

  • Denon AVR-3313CI - page 5

    2 Features Digital video processor up-scales analog video signals (SD resolution) to 4K This unit is equipped with the 4K video upscaling function, which allows for outputting analogue or SD (standard video quality) video to HDMI at 4K (3840 × 2160 pixels). This enables the unit and a TV connected with a single HDMI cable and any video source to b ...

  • Denon AVR-3313CI - page 6

    3 Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for long periods of time, be sure to unplug the ...

  • Denon AVR-3313CI - page 7

    Basic version 4 F Connections v page5 F Setup v page29 F Playback (Basic operation) v page36 F Selecting a listening mode (Sound Mode) v page75 Basic version Here, we explain the connections and basic operation methods for this unit. Basic version Adv anced version Infor mations Basic version DVD ...

  • Denon AVR-3313CI - page 8

    5 Important information Make connections before using this unit. To create a home theater that can play back higher quality video and audio by fully utilizing the capabilities of this unit and your video devices, connect this unit to each of your video devices with HDMI cables. n HDMI-compatible device If your video device does not support HDMI con ...

  • Denon AVR-3313CI - page 9

    6 Important information Converting input video signals for output (Video conversion function) This unit is equipped with three types of video input connectors (HDMI, Component video and video) and three types of video output connectors (HDMI, Component video and video). This function automatically converts various formats of video signals input to ...

  • Denon AVR-3313CI - page 10

    7 Important information G Flow of video signals for ZONE2 H HDMI connector HDMI signal HDMI signal Component video signal Component video signal Component video signal Video signal Video signal Video connector HDMI-compatible TV HDMI-incompatible TV HDMI connector Component video connectors Component video connectors Component video connectors Comp ...

  • Denon AVR-3313CI - page 11

    8 Connecting an HDMI-compatible device You can connect up to ten HDMI-compatible devices (7-inputs/3-outputs) to the unit. When a TV is connected to the HDMI ZONE2 OUT connector, you can play back a video or audio from the device connected to the HDMI 1 - 6 IN connector in ZONE2 ( v page103 ). If the device connected to this unit is equipped wit ...

  • Denon AVR-3313CI - page 12

    9 Connecting an HDMI-compatible device n About ARC (Audio Return Channel) function This function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable. If a TV without the ARC function is connected via HDMI connections, video signals of the playback device connected to this unit are transmitted to the TV, but this u ...

  • Denon AVR-3313CI - page 13

    10 Connecting an HDMI-compatible device Connecting this unit to a TV via HDMI connections When a TV is connected to the HDMI ZONE2 OUT connector, you can play back a video or audio from the device connected to the HDMI 1 - 6 IN connector in ZONE2 ( v page103 ). Cables used for connections Audio and video cable (sold separately) HDMI cable (ARC) ...

  • Denon AVR-3313CI - page 14

    11 Connecting an HDMI-compatible device REC SOURCE SOURCE SELECT STATUS DIMMER INFO OPTION BACK SETUP PHONES VIDEO ZONE 2 SOURCE SELECT ZONE 3 ON/OFF ON/OFF ENTER OUT HDMI G Front panel H Digital camcorder (Primary) • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable. • When co ...

  • Denon AVR-3313CI - page 15

    12 Connecting an HDMI-compatible device HDMI function This unit supports the following HDMI functions: n About 3D function This unit supports input and output of 3D (3 dimensional) video signals of HDMI. To play back 3D video, you need a TV and player that provide support for the HDMI 3D function and a pair of 3D glasses. NOTE • When playing b ...

  • Denon AVR-3313CI - page 16

    13 Connecting an HDMI-compatible device n Deep Color ( v page168 ) When a device supporting Deep Color is connected, use a cable compatible with “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. n Auto Lip Sync ( v page120 , 168 ) n “x.v.Color”, sYCC601 color, Adobe RGB color, Adobe YCC601 color ( v page168 , 17 ...

  • Denon AVR-3313CI - page 17

    14 Connecting an HDMI-incompatible device For high quality video and surround playback, it is recommended to use an HDMI cable to connect this unit to TV and other video devices ( v page8 “Connecting an HDMI-compatible device”). This section describes connections when your device does not support HDMI connections. Connection methods for vari ...

  • Denon AVR-3313CI - page 18

    15 Connecting a TV • This section describes how to connect when your TV does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page8 ). • If the TV connected to this unit is equipped with an HDMI connector that supports ARC, digital audio signals from TV can be transm ...

  • Denon AVR-3313CI - page 19

    16 a a a s s R L R L VIDEO AUDIO AUDIO R L OUT OUT VIDEO COMPONENT VIDEO Y P B P R OUT OUT COAXIAL OPTIC AL OUT Satellite tuner/Cable TV or or or Connecting a set-top box (Satellite tuner/cable TV) This section describes how to connect when your satellite tuner or cable TV does not support HDMI connections. For instructions on HDMI connections, see ...

  • Denon AVR-3313CI - page 20

    17 Connecting an HDMI-incompatible device Connecting a DVD player This section describes how to connect when your DVD player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page8 ). n Audio connection The following methods are available for connecting to this unit. Use e ...

  • Denon AVR-3313CI - page 21

    18 Connecting an HDMI-incompatible device Connecting a Blu-ray Disc player This section describes how to connect when your Blu-ray disc player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page8 ). n Audio connection The following methods are available for connecting t ...

  • Denon AVR-3313CI - page 22

    19 Connecting an HDMI-incompatible device Connecting a digital camcorder This section describes how to connect when your digital camcorder does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page8 ). n Audio connection The following methods are available for connecting to th ...

  • Denon AVR-3313CI - page 23

    20 Connecting an HDMI-incompatible device Connecting a media player • This section describes how to connect when your media player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page8 ). • When recording analog audio, use the analog connection. • See “R ...

  • Denon AVR-3313CI - page 24

    21 Connecting an iPod or USB memory device to the iPod/USB port • You can enjoy music stored on an iPod or USB memory device. • For operating instructions see “Playing an iPod” ( v page 39 ) or “Playing a USB memory device” ( v page42 ). Cables used for connections To connect an iPod to this unit, use the USB cable supplied ...

  • Denon AVR-3313CI - page 25

    22 Connecting an HDMI-incompatible device Connecting a CD player You can enjoy CD sound. n Audio connection The following methods are available for connecting to this unit. Use either of the methods to make a connection. The numbers prefixed with connectors indicate the recommendation order. The smaller the number is, the higher playback quality i ...

  • Denon AVR-3313CI - page 26

    23 Connecting an HDMI-incompatible device Connecting a record player You can enjoy playing records. n Audio connection The following methods are available for connecting to this unit. a AUDIO IN (PHONO) connector This makes an analog audio connection. • This unit is compatible with record players with an MM cartridge. When you connect to a rec ...

  • Denon AVR-3313CI - page 27

    24 Connecting an HDRadio receiver • By connecting a HDRadio antenna to this unit, you can receive HDRadio programs. • HDRadio broadcasting currentry is available in the United States and select other countries. • After connecting the antenna and receiving a broadcast signal ( v page 46 “Listening to HD Radio stati ...

  • Denon AVR-3313CI - page 28

    25 Connecting a external power amplifier • You can use this unit as a pre-amp by connecting a commercially available power amp to the PRE OUT connector. Adding a power amp to each of the channels provides an even greater sound presence. • Select the terminal to use and connect the device. • When using just one surround back speaker, ...

  • Denon AVR-3313CI - page 29

    26 Connecting an external control device REMOTE CONTROL jacks If this unit is installed in a location that is out of range of the signal from the remote control unit, you can still operate the unit and the devices connected to it by using a commercially available IR receiver. You can also use it to remotely control ZONE2, ZONE3 (another room). A UX ...

  • Denon AVR-3313CI - page 30

    27 Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows. Make network connections for this unit by carefully reading information on this page. • Playback of network audio such as the Internet radio and music servers • Playback of music from ...

  • Denon AVR-3313CI - page 31

    28 Connecting the power cord After completing all the connections, insert the power plug into the power outlet. To household power outlet (AC 120 V, 60 Hz) Power cord (supplied) NOTE • Do not plug in the power cord until all connections have been completed. • Do not bundle power cords together with connection cables. Doing so can result i ...

  • Denon AVR-3313CI - page 32

    29 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey ® Setup”. To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, we recommend you measure in six or more positions ...

  • Denon AVR-3313CI - page 33

    30 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. For details, see your subwoofer’s manual. n When using a subwoofer with a direct mode Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting. n When using a subwoofer without a direct ...

  • Denon AVR-3313CI - page 34

    31 Preparation (Continued) Detection & Measurement (Main) Set up speakers (Audyssey ® Setup) 5 Select “Start” and then press ENTER . Audyssey Setup Back Next Connect the calibration microphone to the SETUP MIC input on the front the AV receiver. 6 Select “Next” and then press ENTER . The subwoofer volume setting screen is displayed. Au ...

  • Denon AVR-3313CI - page 35

    32 Calculation Set up speakers (Audyssey ® Setup) 11 Repeat step 10, measuring positions 3 to 8. When measurement of position 8 is completed, a “Measurements finished.” message is displayed. Audyssey Setup Repeat Last Test Calculation Measurements finished. 12 Select “Calculation” and then press ENTER . Measuring results are analyzed, and ...

  • Denon AVR-3313CI - page 36

    33 Set up speakers (Audyssey ® Setup) 14 Select “Store” and then press ENTER . Save the measurement results. Audyssey Setup Now storing...Please wait. 50% Audyssey Setup Distances Speaker Config. Levels Crossovers Store Check processing results. To proceed, press “Store”. • Saving the results requires about 10 seconds. • During s ...

  • Denon AVR-3313CI - page 37

    34 Error messages NOTE • An error message is displayed if Audyssey ® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Then perform Audyssey ® Setup again. • If the result still differs from the actual co ...

  • Denon AVR-3313CI - page 38

    35 Parameter Check This function enables you to check the measurement results and equalizer characteristics after Audyssey ® Setup. 1 Use ui to select “Parameter Check” and then press ENTER . Audyssey Setup Amp Assign Channel Select Parameter Check Start Your AV receiver can automatically measure the acoustics of your room then optimize your s ...

  • Denon AVR-3313CI - page 39

    36 Playback (Basic operation) Setup ( v page29 ) n Turning the power on ( v page36 ) n Selecting the input source ( v page36 ) n Adjusting the master volume ( v page37 ) n Turning off the sound temporarily ( v page37 ) n Playing a Blu-ray Disc player/DVD player ( v page37 ) n Playing a Blu-ray Disc player compatible with Denon Lin ...

  • Denon AVR-3313CI - page 40

    37 Adjusting the master volume Use VOLUME df to adjust the volume. • The volume display method varies depending on the “Scale” setting ( v page116 ). n When the “Scale” setting ( v page116 ) is “0 – 98” G Adjustable range H 0.0 0.5 – 98.0 n When the “Scale” setting ( v page116 ) is “–79.5dB – 18.0dB” G Adju ...

  • Denon AVR-3313CI - page 41

    38 NOTE • Set the Blu-ray disc player’s “Denon Link” setting to “On”. For instructions on operation, refer to the Blu-ray disc player’s manual. • When a Blu-ray disc is played with the input mode set to “Auto”, playback is performed in the Denon Link HD mode. • When the input mode is set to “HDMI”, normal HDMI pla ...

  • Denon AVR-3313CI - page 42

    39 Playing an iPod You can use the USB cable provided with the iPod to connect the iPod with the unit’s iPod/USB port and enjoy music stored on the iPod. For information on the iPod models that can be played back with this unit, see “Connecting an iPod or USB memory device to the iPod/USB port” ( v page21 ). Listening to music on an iPod T ...

  • Denon AVR-3313CI - page 43

    40 Playing an iPod n Setting Browse mode (Operation Mode) In this mode, various lists and screens during playback on iPod are displayed on the TV screen. This section describes the steps up to playing back tracks on iPod in “Browse Mode”. 1 Press iPod/USB to switch the input source to “iPod/ USB”. 2 Press OPTION . The option menu screen is ...

  • Denon AVR-3313CI - page 44

    41 Playing an iPod n Performing repeat playback (Repeat) 1 Press OPTION while in Browse mode. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER . OPTION iPod Title Now Playing Artist Album 00:06 100% Previous Option Pause Next Back Repeat Option Random Operation Mode 3 Use o p to select repeat playback mode. OPT ...

  • Denon AVR-3313CI - page 45

    42 Playing a USB memory device Playing back music or still picture (JPEG) files recorded on a USB memory device. Important information • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit. • This unit is compatible with USB memory devices in “FAT16” or “FA ...

  • Denon AVR-3313CI - page 46

    43 Playing files stored on USB memory devices 1 Connect the USB memory device to the iPod/USB port ( v page 21 ). 2 Press iPod/USB to switch the input source to “iPod/USB”. D&M1 D&M2 D&M3 Music1 Music2 Music3 Music4 OPTION USB [1/9] Option 3 Use ui to select the search item or folder, then press ENTER or p . 4 Use ui to select the ...

  • Denon AVR-3313CI - page 47

    44 Playing a USB memory device n USB memory device operation buttons Operation buttons Function CH/PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name OPTION Text Search / Repeat playback / Random playback / Picture View / Slideshow uio p Cursor operation / Auto search (cue, ui ) ENTER (Press and rel ...

  • Denon AVR-3313CI - page 48

    45 Listening to HDRadio stations For antenna connections, see “Connecting an HDRadio receiver” ( v page24 ). Important information n Using the HDRadio™ receiver HD Radio stations offer higher sound quality than conventional FM/ AM broadcasts. It is also possible to receive data services and select broadcasts from among up to ei ...

  • Denon AVR-3313CI - page 49

    46 Listening to HDRadio stations Listening to HDRadio stations 1 Press TUNER to switch the input source to “HD Radio”. G TV Screen H TUNE+/- STEREO HD-AUTO CH / OPTION HD Radio CH 1 FM 87.50MHz Now Playing Tune Preset Option G Display of this unit H 01 FM 87.50MHz 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select ? ...

  • Denon AVR-3313CI - page 50

    47 Listening to HDRadio stations n Changing the tuning mode (Tune Mode) You can change the mode for tuning into FM/AM broadcasts. 1 Press TUNER to switch the input source to “HD Radio”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Tune Mode”, then press ENTER . G TV Screen H TUNE+/- STEREO HD-AUTO CH / OPTION ...

  • Denon AVR-3313CI - page 51

    48 Listening to HDRadio stations n Tuning in by entering the radio frequency (Direct Tune) You can enter the receiving frequency directly to tune in. 1 Press TUNER to switch the input source to “HD Radio”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Direct Tune”, then press ENTER . The direct tuner screen is ...

  • Denon AVR-3313CI - page 52

    49 Presetting broadcast stations n Tuning in to radio stations and presetting them automatically (Auto Preset Memory) Up to 56 stations can be preset. If “Auto Preset Memory” is performed after performing “Preset Memory”, the “Preset Memory” settings will be overwritten. 1 Press TUNER to switch the input source to “HD Radio”. 2 Pres ...

  • Denon AVR-3313CI - page 53

    50 Listening to HDRadio stations n Presetting the current broadcast station (Preset Memory) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. 1 Tune in the broadcast station you want to preset. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Preset Mem ...

  • Denon AVR-3313CI - page 54

    51 n Specify a name for the preset broadcast station (Preset Name) You can set the name to the preset broadcast station or change it. Up to eight characters can be input. 1 Press TUNER to switch the input source to “HD Radio”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Preset Name”, then press ENTER . The Pres ...

  • Denon AVR-3313CI - page 55

    52 Listening to HDRadio stations n Skipping preset broadcast stations (Preset Skip) You can set in advance, the stations you do not want to be displayed when tuning in, by groups or by stations. The preset skip setting is useful when tuning in, because only your favorite stations are displayed. 1 Press TUNER to switch the input source to “HD R ...

  • Denon AVR-3313CI - page 56

    53 Listening to HDRadio stations Cancelling preset skip 1 While the Preset Skip screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. 2 Use ui to select a broadcast station to cancel the skip for. G TV Screen H TUNE+/- STEREO HD-AUTO CH / OPTION HD Radio CH 1 FM 87.50MHz Now Playing Tune Preset Opt ...

  • Denon AVR-3313CI - page 57

    54 Listening to internet radio Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations from around the world can be received. Important information The broad cast station types and specifications supported by this unit for playback are as follows. G Playable broadcast station types H Supported file types I ...

  • Denon AVR-3313CI - page 58

    55 Listening to internet radio n Adjusting the sound quality (Restorer) Make this setting at “Restorer” ( v page115 ) in the menu. You can use the “Restorer” function to restore to a state close to the audio before compression while correcting the bass feel to enjoy a richer playback experience. The default setting is “Mode 3 (Low)”. ...

  • Denon AVR-3313CI - page 59

    56 Listening to internet radio n Using vTuner to add Internet radio stations to favorites There are many Internet radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations. If this is the case, then please use vTuner, an Internet ra ...

  • Denon AVR-3313CI - page 60

    57 Playing back files stored on a PC and NAS This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. Important information • The network audio playback function of this unit connects to the server using technologies shown below. • Windows Media Player Network ...

  • Denon AVR-3313CI - page 61

    58 Playing back files stored on a PC and NAS Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. n Sharing media stored in PC If you are using a media server, be sure to apply this setting first. When using Windows Media Player 12 (Windows 7) NOTE Perform this procedure after ch ...

  • Denon AVR-3313CI - page 62

    59 Playing back files stored on a PC and NAS Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 27 “Connecting to a home network (LAN)”). w If settings are required, make the “Setti ...

  • Denon AVR-3313CI - page 63

    60 Playing back files stored on a PC and NAS Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu. You can easily find and use the desired function. n Searching content with keywords (Text Search) ( v page69 ) ...

  • Denon AVR-3313CI - page 64

    61 Using online services This unit supports playback of the online services shown below. n About Flickr ( v page62 ) Flickr is an online photograph sharing service that started in 2004. You can use the this unit to view photographs that have been made public by Flickr users. You do not need an account to use Flickr. To view photographs that you ...

  • Denon AVR-3313CI - page 65

    62 Using online services Viewing photographs on the Flickr site You can view photographs shared by particular users, or all of the photographs shared on Flickr. n Viewing photographs shared by particular users 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 27 “Connecting to a home network (LA ...

  • Denon AVR-3313CI - page 66

    63 Using online services n Viewing all photographs on Flickr 1 Use ui to select “All Content”, then press ENTER or p . OPTION Flickr [1/2] Add Flickr Contact All Content Option 2 Use ui to select the folder, and then press ENTER or p . Interestingness Displays photographs that are popular from the number of user comments or number of times they ...

  • Denon AVR-3313CI - page 67

    64 Using online services Listening to Pandora ® 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 27 “Connecting to a home network (LAN)”). w If settings are required, make the “Settings” ( v page137 ). e Complete step 4 and obtain a Pandora account. • If you already have a Pandor ...

  • Denon AVR-3313CI - page 68

    65 Using online services n Creating a new station You can create up to 100 radio stations. 1 Use ui to select “New Station”, then press ENTER or p . BACK My Station [1/3] Sign out Exit New Station Quick Mix D&M1 Radio 2 Input a track or artist name, then press O K . BACK New Station Input Select Cancel Track or Artist A N 0 $ B O 1 % C P 2 ...

  • Denon AVR-3313CI - page 69

    66 Using online services n Giving Feedback and Managing Stations You can personalize your stations by providing feedback. Press p while a track is playing. The Pandora menu screen is displayed. Menu [1/8] I like this track I don’t like this track Why is this track playing? Create station Bookmark this artist Bookmark this track I’m tired of thi ...

  • Denon AVR-3313CI - page 70

    67 Using online services Listening to SiriusXM Satellite Radio Over 120 channels of the SiriusXM programming you love, including commercial-free music plus sports, talk, news and entertainment. Listen anywhere on your computer or smartphone. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 27 “ ...

  • Denon AVR-3313CI - page 71

    68 Using online services n Sign out Disassociate this unit from your SiriusXM account. 1 While the SiriusXM top menu is displayed, press BACK . 2 When the popup menu appears, use o p to select “Yes”, then press ENTER . BACK SiriusXM [1/20] Pop Rock Dance/Electronic Hip-Hop/R&B Country Chirisitan Jazz/Standards Sign Out Exit Are you sure you ...

  • Denon AVR-3313CI - page 72

    69 Convenient functions Here, we explain how to use convenient functions for NETWORK sources and USB sources. The source names under the titles of each function’s description are sources that allow use of these functions. n Searching content with keywords (Text Search) ( v page69 ) n Performing repeat playback (Repeat) ( v page70 ) n Perfor ...

  • Denon AVR-3313CI - page 73

    70 Convenient functions Performing repeat playback (Repeat) USB Media Server 1 While content is playing, press OPTION . The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER . OPTION USB Title Now Playing Artist Album 00:06 100% Previous Option Pause Next Back MP3 128kbps Repeat Option Random Picture View 3 Use o p ...

  • Denon AVR-3313CI - page 74

    71 Convenient functions Favorites function There are two ways to add content to favorites: q Add to favorites from the Option menu w Add to the FAVORITE STATION button n Add to favorites from the Option menu (Favorite Memory) Internet Radio Media Server You can add up to 100 items as favorites for all sources (Internet Radio and Media Server). 1 Wh ...

  • Denon AVR-3313CI - page 75

    72 Convenient functions n Deleting content added to favorites (Remove Favorites) 1 Press NETWORK . 2 Use uio p to select “Favorites”, then press ENTER . Favorites Internet Radio Media Server Network 3 Use ui to select the content you want to delete from favorites, then press OPTION . The option menu screen is displayed. 4 Use ui to select “Re ...

  • Denon AVR-3313CI - page 76

    73 AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home. Use the Apple Remote app z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store. n Streaming music stored in iPhone, iPod touch, or iPad directly to the unit If you update ...

  • Denon AVR-3313CI - page 77

    74 AirPlay function n Perform iTunes playback operations with the remote control unit of this unit With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. 1 Select “Edit” – “Preferences...” on the menu. 2 Select “Devices” in the iTunes setting window. 3 Check “Allow iTunes c ...

  • Denon AVR-3313CI - page 78

    75 Selecting a listening mode (Sound Mode) This unit allows you to enjoy various kinds of surround and stereo playbacks. Multi-channel audio formats are adopted by many of the contents including Blu-ray disc and DVD as well as digital broadcasting and Internet-delivered movies and music. This unit supports playback of almost all of these multi-chan ...

  • Denon AVR-3313CI - page 79

    76 Selecting a listening mode n Listening mode • The following listening modes can be selected using the MOVIE , MUSIC , GAME , and PURE buttons. • Adjust the sound field effect with the menu “Surround Parameter” ( v page113 ) to enjoy your favorite sound mode. Operation button Input signal Listening mode 2-channel z 1 STEREO DOLB ...

  • Denon AVR-3313CI - page 80

    77 Selecting a listening mode Operation button Input signal Listening mode DTS-HD / DTS Express DTS-HD HI RES / DTS-HD HI RES A-DSX z 4 DTS-HD MSTR / DTS-HD MSTR A-DSX z 4 DTS Express / DTS Express A-DSX z 4 DTS-HD + NEO:6 DTS-HD + PL g x Music DTS-HD + PL g z PCM multi- channel MULTI CH IN / MULTI CH IN A-DSX z 4 MULTI CH IN 7.1 MULTI IN + Dolby E ...

  • Denon AVR-3313CI - page 81

    78 Selecting a listening mode Operation button Input signal Listening mode All DIRECT PURE DIRECT z 1 2-channel also includes analog input. z 2 This mode plays back 2-channel source in 5.1 or 7.1-channel playback. It cannot be selected when headphones are used, or when only front speakers are used. z 3 Some listening modes cannot be selected, depen ...

  • Denon AVR-3313CI - page 82

    79 Selecting a listening mode n Description of listening mode types Dolby listening mode Listening mode type Description DOLBY PL g x z 1 This mode can be selected when a Dolby Pro Logic g x decoder is used to play back 2-channel source in 6.1/7.1-channel surround sound including the surround back channel. By adding the surround back channel, a str ...

  • Denon AVR-3313CI - page 83

    80 Selecting a listening mode Audyssey DSX listening mode Listening mode type Description Audyssey DSX (A-DSX) z This mode creates playback for the new channels (front wide or front height) in 5.1-channel systems. By adding front wide or front high channels, the surround sound effects sound more three dimensional and realistic. z This can be select ...

  • Denon AVR-3313CI - page 84

    Advanced version 81 F Installation/connection/setup of speakers (Advanced) v page82 F Playback (Advanced operation) v page95 F Playback in ZONE2/ZONE3 (Separate room) v page103 F How to make detailed settings v page106 Advanced version Here, we explain functions and operations that let you make better use of this unit. Basic version Adv ...

  • Denon AVR-3313CI - page 85

    82 Procedure for speaker settings Speaker installation Speaker connection ( v page84 ) Set up speakers ( v page92 ) Speaker installation • Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Here, we explain how to install the speakers using a typical example. ...

  • Denon AVR-3313CI - page 86

    83 Speaker installation When 7.1-channel speakers are installed using surround back, front height, and front wide speakers When using Audyssey DSX ® , install front wide speakers or front height speakers. When using Dolby Pro Logic g z, install front height speakers. FHR FHL FL FR SL SR FWL FWR SW 1 SW 2 C SBL SBR z 1 z 2 z 3 z 5 z 4 Listening pos ...

  • Denon AVR-3313CI - page 87

    84 Speaker connection Here, we connect the speakers in the room to this unit. This section explains how to connect them using a typical example. n Connecting 7.1-channel speakers using surround back, front height, and front wide speakers ( v page85 ) n Connecting 6.1-channel speakers using one surround back speaker ( v page86 ) n Connecting 5 ...

  • Denon AVR-3313CI - page 88

    85 Speaker connection Connecting 7.1-channel speakers using surround back, front height, and front wide speakers The illustration on the right shows a connection example for performing 7.1-channel playback using the surround back, front height or front wide speakers. If you connect the surround back, front height and front wide speakers before you ...

  • Denon AVR-3313CI - page 89

    86 FL FR C SL SR SW SB Connecting 6.1-channel speakers using one surround back speaker If using only one surround back speaker, connect to the “L” side of the SURROUND BACK terminal. For speaker settings in this case, see “When 6.1ch speakers are installed” ( v page83 ). To perform 6.1-channel playback using the surround back speaker, se ...

  • Denon AVR-3313CI - page 90

    87 Speaker connection Connecting 5.1-channel speakers To perform 5.1-channel playback, set “Assign Mode” to “Main Only” in steps 3 to 5 for “Set up “Amp Assign”” ( v page92 ). Cables used for connections Audio cable (sold separately) Speaker cable Subwoofer cable NOTE • For speaker cable connections, see page84 . • F ...

  • Denon AVR-3313CI - page 91

    88 Speaker connection FL(A) FL(B) FR(B) FR(A) SW Connecting front A/B speakers You can connect a second set of speakers to this unit and use them for playback. In this case, set “Assign Mode” to “Front B” in steps 3 to 5 for “Set up “Amp Assign”” ( v page92 ). Cables used for connections Audio cable (sold separately) Speaker cabl ...

  • Denon AVR-3313CI - page 92

    89 Speaker connection FL FR SW Connecting 2.1-channel speakers Cables used for connections Audio cable (sold separately) Speaker cable Subwoofer cable NOTE • For speaker cable connections, see page84 . • For speaker impedance , see page84 . n For connecting two subwoofers Two subwoofers can be connected to this unit. The same signal ...

  • Denon AVR-3313CI - page 93

    90 Speaker connection FL FR SW w q w q (R) (L) Connecting front speakers with a bi-amp connection • You cannot use surround back speakers in a bi-amp connection. Use front speakers that support a bi-amp connection and connect the speakers to the FRONT speaker terminals and the SURROUND BACK speaker terminals. In this case, set “Assign Mode? ...

  • Denon AVR-3313CI - page 94

    91 Speaker connection FL FL’ FR FR’ C SW SL SR Multi channel playback (Sound mode) 2-channel playback (DIRECT or STEREO mode) Switching Connecting 5.1-channel + 2-channel speakers You can connect the other front speakers for 2-channel playback using the DIRECT mode or STEREO mode. The speakers used exclusively for 5.1-channel playback and the s ...

  • Denon AVR-3313CI - page 95

    92 1 Set up the remote control unit n Set up the zone mode Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. Press MAIN NOTE When using a remote control with preset codes registered ( v page 148) , press AVR to set the remote control to the AVR- operation mode before operation. 2 Connect the setup microphone. Audyssey Setup Amp A ...

  • Denon AVR-3313CI - page 96

    93 Set up speakers 7 Set up “Channel Select” Use ui to select “Channel Select”, and then press ENTER . Channel Select Subwoofer Measure Audyssey Setup Amp Assign Channel Select Start Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone. Set the following items if nec ...

  • Denon AVR-3313CI - page 97

    94 Set up speakers NOTE After performing Audyssey ® Setup, do not change the speaker connections or subwoofer volume. In event of a change, perform Audyssey ® Setup again. 10 Use o p to set whether or not a subwoofer channel is measured, and then press ENTER . Measure Set for measuring a subwoofer. Skip Set for no measuring of a subwoofer. 11 Use ...

  • Denon AVR-3313CI - page 98

    95 Setup ( v page29 ) Playback (Basic operation) ( v page36 ) Selecting a listening mode (Sound Mode) ( v page75 ) n HDMI control function ( v page95 ) n Sleep timer function ( v page97 ) n Quick select function ( v page98 ) n REC OUT mode ( v page99 ) n Web control function ( v page100 ) n Various memory functions ( v page? ...

  • Denon AVR-3313CI - page 99

    96 HDMI control function If the HDMI control function does not operate properly, check the following points. • Is the TV or player compatible with the HDMI control function? • Is “HDMI Control” ( v page121 ) set to “On”? • Is “Power Off Control” ( v page121 ) set to “All” or “Video”? • Is “Control Mon ...

  • Denon AVR-3313CI - page 100

    97 Sleep timer function • You can have the power automatically switched to standby once a set time has elapsed. This is convenient for viewing and listening while going to sleep. • The sleep timer function can be set for each zone ( v page 105 “Sleep timer function”). (The MAIN ZONE setting method is explained here.) 1 Press MAIN t ...

  • Denon AVR-3313CI - page 101

    98 Quick select function You can save settings such as the input source selection, volume level, and sound mode at the QUICK SELECT 1 – 4 buttons. You can simply press one of the set QUICK SELECT buttons for subsequent playback to switch to various saved settings all at once. • By saving frequently used settings at the QUICK SELECT 1 – 4 b ...

  • Denon AVR-3313CI - page 102

    99 REC OUT mode • When using the audio/video recording connectors (MEDIA PLAYER outputs), you can record the audio or video from a different program source while listening to the currently played track. • For the connection method, see “Connecting a media player” ( v page20 ). 1 Press ZONE2 / REC SOURCE until “RECOUT SOURCE” is ...

  • Denon AVR-3313CI - page 103

    10 0 Web control function You can control this unit from a web control screen on a web browser. • This unit and the PC need to be connected to the network properly ( v page 27 “Connecting to a home network (LAN)”) in order to use the web control function. • Depending on the settings of your security-related software, you may not be ...

  • Denon AVR-3313CI - page 104

    101 Web control function 6 Operate. G Example 1 H MAIN ZONE control screen ZONE CONTROL NETWORK iPod/USB HD Radio QUICK SELECT RELOAD Add To Your Favorite Top Menu MAIN ZONE SLEEP 40.0 DENON AVR-3313CI CBL/SAT FAVORITE STATION STEREO CBL/SAT DVD GAME AUX-1 AUX-2 MEDIA PLAYER HD Radio CD PHONO NETWORK iPod/USB Blu-ray TV AUDIO Internet Radio 1 2 3 4 ...

  • Denon AVR-3313CI - page 105

    10 2 Various memory functions Personal memory plus function This function sets the settings (input mode, sound mode, HDMI output mode, MultEQ ® XT, Dynamic EQ, audio delay etc.) last selected for the individual input sources. The surround parameters, tone settings and the volumes of the different speakers are stored for the individual sound modes. ...

  • Denon AVR-3313CI - page 106

    10 3 Playback in ZONE2/ZONE3 (Separate room) • You can operate this unit so as to enjoy audio in a room (ZONE2, ZONE3) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE, ZONE2 and ZONE3. You can also play back separate sources in the MAIN ZONE, ZONE2 and ZON ...

  • Denon AVR-3313CI - page 107

    10 4 Audio output w Zone playback by audio output (PRE OUT) n Audio connections (ZONE2, ZONE3) The audio signals of this unit’s ZONE2 and ZONE3 audio output terminals are output to the ZONE2 and ZONE3 amplifiers and played on these amplifiers. A UX IN A UX IN R L R L MAIN ZONE ZONE2 ZONE3 This unit Power amplifiers Power amplifiers We recomme ...

  • Denon AVR-3313CI - page 108

    10 5 Playback 1 Press ZONE2 or ZONE3 to switch the zone mode. ZONE2 or ZONE3 lights. Input source select buttons 2 Press POWER X to turn on the ZONE2 or ZONE3 power. • Also press input source select button when in standby mode, the power turns on. • When POWER X is pressed, ZONE2 or ZONE3 turns off. • Power in ZONE2 or ZONE3 can be t ...

  • Denon AVR-3313CI - page 109

    10 6 Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. How to make detailed settings Setting items Detailed items Descriptio ...

  • Denon AVR-3313CI - page 110

    10 7 Menu map Setting items Detailed items Description Page General Language Sets the language for display the menu on the TV screen. 140 ZONE2 Setup Makes settings for audio playback in a ZONE2 system. 140 ZONE3 Setup Makes settings for audio playback in a ZONE3 system. 140 Zone Rename Change the display title of each zone to one you prefer. 141 Q ...

  • Denon AVR-3313CI - page 111

    10 8 Examples of menu screen displays Typical examples are described below. G Example 1 H Menu selection screen (Top menu) Audio [1/2] Surround Parameter Tone Dialogue Level Subwoofer Level Restorer Audio Delay Volume Audyssey Adjust surround sound parameters q Currently selected setup icon w List of GUI menu setup icons e Currently selected setup ...

  • Denon AVR-3313CI - page 112

    10 9 Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description Top menu display Setup Menu Audio Video Inputs Speakers Network General Setup Assistant w *SETUP MENU Audio w q Press SETUP to display the menu screen. w TV screen: Display ...

  • Denon AVR-3313CI - page 113

    11 0 Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. • Text Search ( v page69 ) • Preset Name ( v page51 ) • Source Rename ( v page126 ) • Friendly Name ( v page136 ) • Zone Rename ( v page141 ) • Quick Select Names ( v page14 ...

  • Denon AVR-3313CI - page 114

    111 Inputting characters 10 Key input screen n Display of a 10 Key input screen Inputs/Source Rename Changes the display name for this source Set Defaults CBL/SAT DVD Blu-ray GAME MEDIA PLAYER TV AUDIO AUX1 1 DVD Blu-ray GAME MEDIA PLAYER TV AUDIO AUX1 w q q Cursor w Character input section n Input method Using the number buttons 1 When the keyboar ...

  • Denon AVR-3313CI - page 115

    11 2 Audio Make audio-related settings. Menu operation 1 Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Men ...

  • Denon AVR-3313CI - page 116

    11 3 Setting items Setting details Center Image Distributes the dialogue output from the center channel to the front left and right channels and widens the sound image in the front. You can set this when the sound mode is set to DTS NEO:6 in the “Music” mode. 0.0 – 1.0 (0.3) The smaller the value, the more dialogue is concentrated on the cent ...

  • Denon AVR-3313CI - page 117

    11 4 Setting items Setting details Speaker Select Make settings for the speakers outputting sound when playing back in original surround mode. Surround Back : Sound is output from the surround back speakers. Height : Sound is output from the front height speakers. Wide : Sound is output from the front wide speakers. Off : Sound is not output from t ...

  • Denon AVR-3313CI - page 118

    11 5 Subwoofer Level Default settings are underlined. Sets the subwoofer on/off and its output level. Setting items Setting details Subwoofer Turn subwoofer output on and off. On : The subwoofer is used. Off : The subwoofer is not used. NOTE This can be set when the sound mode is “DIRECT” and “PURE DIRECT” ( v page 75 ) and the “Subwoo ...

  • Denon AVR-3313CI - page 119

    11 6 Audio Audio Delay Default settings are underlined. While viewing video, manually adjust the time to delay audio output. Setting details 0ms – 200ms • This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” ( v page 120 ) is set to “On” and when a TV compatible with Auto Lip Sync is connected. • Store ? ...

  • Denon AVR-3313CI - page 120

    11 7 Audio Setting items Setting details Dynamic EQ Solve the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ ® XT. On : Use Dynamic EQ. Off : Do not use Dynamic EQ. is displayed when set to “On”. NOTE When the menu “Dynamic EQ” setting is “On”, ...

  • Denon AVR-3313CI - page 121

    11 8 Audio Graphic EQ Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker. “Graphic EQ” can be set when “MultEQ ® XT” setting ( v page116 ) is “Graphic EQ”. Setting items Setting details Speaker Selection Select whether to adjust tones for individual speakers or for all speakers. All : Adjus ...

  • Denon AVR-3313CI - page 122

    11 9 Video Make video-related settings. NOTE When HDMI ZONE2 function is used, these settings are not available. Menu operation 1 Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. • ...

  • Denon AVR-3313CI - page 123

    12 0 Video Picture Adjust Default settings are underlined. Picture quality can be adjusted. We recommend leaving the settings unchanged from the default settings. First adjust the display image quality on your TV, and use this menu only when you want to make fine adjustments. • This item can be set when the input source is CBL/SAT DVD Blu-ray ...

  • Denon AVR-3313CI - page 124

    12 1 Video Setting items Setting details HDMI Control You can link operations with devices connected to HDMI and compatible with HDMI Control. On : Use HDMI control function. Off : Do not use HDMI control function. • When a device that is not compatible with the HDMI control function is connected, set “HDMI Control” to “Off”. • Pl ...

  • Denon AVR-3313CI - page 125

    12 2 Video Setting items Setting details i/p Scaler Convert the input source resolution to the resolution set. CBL/SAT DVD Blu-ray z GAME z AUX1 AUX2 z MEDIA PLAYER CD z NETWORK TV AUDIO z Analog : Use i/p scaler function for analog video signal. Analog & HDMI : Use i/p scaler function for analog and HDMI video signal. HDMI : Use i/p scaler fun ...

  • Denon AVR-3313CI - page 126

    12 3 Video Volume Display Default settings are underlined. Sets where to display the master volume level. Setting items Setting details Volume Bottom : Display at the bottom. Top : Display at the top. Off : Turn display off. When the master volume display is hard to see when superimposed on movie subtitles, set to “Top”. Info Display Default se ...

  • Denon AVR-3313CI - page 127

    12 4 Inputs Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ...

  • Denon AVR-3313CI - page 128

    12 5 Setting items Setting details HDMI Set this to change the HDMI input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME AUX1 AUX2 MEDIA PLAYER CD TV AUDIO HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 / HDMI 7 : Assign an HDMI input connector to the selected input source. None : Do not assign an HDMI input connector to th ...

  • Denon AVR-3313CI - page 129

    12 6 Setting items Setting details DIGITAL Set this to change the digital input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME AUX1 AUX2 MEDIA PLAYER CD TV AUDIO COAX 1 / COAX 2 / OPT 1 / OPT 2 : Assign a digital input connector to the selected input source. D.LINK : Assign the digital input connector when the Denon Link connect ...

  • Denon AVR-3313CI - page 130

    12 7 Inputs Hide Sources Default settings are underlined. Remove from the display input sources that are not used. Setting details CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / iPod/USB / CD / HD Radio / NETWORK / TV AUDIO / PHONO : Select input source that is not used. • Show : Use this source. • Hide : Do not use this ...

  • Denon AVR-3313CI - page 131

    12 8 Inputs Video Source Default settings are underlined. Video of another input source is played back combined with the playing audio. Setting details Default : Play the picture and sound of the input source. Blu-ray / DVD / TV AUDIO / CBL/SAT / GAME / MEDIA PLAYER / AUX1 / AUX2 / CD : Select video input source to view. The video of the selected i ...

  • Denon AVR-3313CI - page 132

    12 9 Speakers Set when changing Audyssey ® Setup settings. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to set Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page116 ). • Can be used without changing the settings. Please set if necessary. Menu operat ...

  • Denon AVR-3313CI - page 133

    13 0 Manual Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to select Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page116 ...

  • Denon AVR-3313CI - page 134

    13 1 Setting items Setting details Bass Set subwoofer and LFE signal range playback. Subwoofer Mode : Select low range signals to be reproduced by subwoofer. • LFE : The low range signal of the channel set to “Small” speaker size is added to the LFE signal output from the subwoofer. • LFE+Main : The low range signal of all channels is ...

  • Denon AVR-3313CI - page 135

    13 2 Speakers Setting items Setting details Distances Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. Unit : Set the unit of distance. • Feet / Meters Step : Set the minimum variable width of the distance. • 1ft / 0.1ft • 0.1m / 0.01m Set Defaults : The ? ...

  • Denon AVR-3313CI - page 136

    13 3 Speakers Setting items Setting details Crossovers Set the maximum frequency of the bass signal output from each channel to the subwoofer. Set the Crossover Frequency to suit the bass reproduction capability of the speaker being used. Crossover : Set the crossover frequency. • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200 ...

  • Denon AVR-3313CI - page 137

    13 4 Speakers Setting items Setting details 2ch Playback (Continued) SW Mode : Select low range signals to be reproduced by subwoofer. • LFE : When the “2ch Playback – “Front” setting is set to “Large”, the LFE signal alone is output from the subwoofer. Also, when the “2ch Playback” – “Front” setting is set to “Small” ...

  • Denon AVR-3313CI - page 138

    13 5 Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network (LAN). If you assign an IP address for each device, you must use the “IP Address” setti ...

  • Denon AVR-3313CI - page 139

    13 6 Information Display network information. Setting details Friendly Name / DHCP=On or Off / IP Address / MAC Address MAC Address is required to make a vTuner account. IP Control Default settings are underlined. Set the network function on/off during standby. Setting details Off In Standby : Suspend network function during standby. Always On : Ne ...

  • Denon AVR-3313CI - page 140

    13 7 Network Settings Default settings are underlined. Make settings for wired LAN. Only set “Settings” when connecting to a network without a DHCP function. Setting details Network Information IP Control Friendly Name Settings Maintenance Mode Selects how configure the network settings q Network/Settings DHCP IP Address Subnet Mask Default Gat ...

  • Denon AVR-3313CI - page 141

    13 8 Network Setting details n Proxy settings Make this setting when connecting to the Internet via a proxy server. Make the proxy settings only when you connect to the Internet via a proxy server that is on your internal network or provided by your provider, etc. Network Information IP Control Friendly Name Settings Maintenance Mode Selects how co ...

  • Denon AVR-3313CI - page 142

    13 9 General Make various other settings. Menu operation 1 Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights. 2 Press SETUP . The menu is displayed on the TV screen. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the M ...

  • Denon AVR-3313CI - page 143

    14 0 General Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Français / Español “Language” can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting. 1. Press and hold the main unit’s o p for at ...

  • Denon AVR-3313CI - page 144

    14 1 Zone Rename Change the display title of each zone to one you prefer. Setting details MAIN ZONE / ZONE2 / ZONE3 • Up to 10 characters can be input. • For character input, see page110 . Quick Select Names Change the “Quick Select” display title to one you prefer. Setting details Quick Select 1 / Quick Select 2 / Quick Select 3 / ...

  • Denon AVR-3313CI - page 145

    14 2 Information Show information about receiver settings, input signals, etc. NOTE This item is not compatible with the HDMI ZONE2 function. Items Setting details Audio Show information about audio input signals. Sound Mode : The currently set surround mode. Input Signal : The input signal type. Format : The number of input signal channels (presen ...

  • Denon AVR-3313CI - page 146

    14 3 General Firmware Default settings are underlined. Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications. Setting items Setting details Update Update the firmware of the receiver. NOTE In cases where it is not possible to connect to the network after doing a firmware update, conn ...

  • Denon AVR-3313CI - page 147

    14 4 General Setting items Setting details Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. NOTE In cases where it is not possible to connect to the network after adding a new function, connect to the network again using “Network” ( v page135 ). Upgrade Package : Display the items to be upgrade ...

  • Denon AVR-3313CI - page 148

    14 5 Registering preset codes When preset codes are registered in the included remote control unit, it can then be used to operate any devices you have, such as DVD players or TVs made by different manufacturers. n Buttons used for operating the devices q DEVICE X For switching power of each device on or off. w uio p , ENTER , BACK For menu operati ...

  • Denon AVR-3313CI - page 149

    14 6 Registering preset codes n Remote control operation modes By default, the input source select buttons on the remote control perform only the input source select operation. To operate an external device with this remote control, set the preset code in “List of preset codes” ( v page180 ) for the device you want to register to each input ...

  • Denon AVR-3313CI - page 150

    14 7 Preset codes that can be registered to TV buttons Button Default preset mode Available change to preset AVR TV group • When you press TV AUDIO that has a preset code registered to it, the “TV” indication on the remote control lights. To perform menu operations of this unit, press AVR to have the remote control enter the AVR operation ...

  • Denon AVR-3313CI - page 151

    14 8 Operating external devices Press the input source select button ( v page 36 ). • The operation mode of the remote control unit is switched as shown in the table. Input source select button Input source of this unit Operation mode Devices controllable with the remote control unit – This unit (AVR-operation) z 2 z 1 CBL/SAT Device registe ...

  • Denon AVR-3313CI - page 152

    14 9 Operating devices The supplied remote control unit can control a device other than this unit. 1 Press the input source select button to which the preset code for the device you want to operate has been registered ( v page 148 ). 2 Operate the device. • For details, refer to the device’s operating instructions. n CBL/SAT group (0 zzzz ) ...

  • Denon AVR-3313CI - page 153

    15 0 Operating devices n VCR/DVR group (2 zzzz ) (DVD recorder (DVR) / Personal video recorder (PVR) / video cassette recorder (VCR)) operation Operation buttons Function DEVICE X Power on/standby z DEVICE MENU Menu TV X TV power on/standby TV INPUT Switch TV input CH/PAGE df Switch channels (up/down) INFO Information OPTION Sub menu, Option uio p ...

  • Denon AVR-3313CI - page 154

    15 1 Specifying the zone used with the remote control unit To prevent accidental misuse, you can set the zone for which the remote control unit is used. Press and hold any of the MAIN , 2 or 3 buttons and SETUP at the same time for three seconds or longer. The operation mode indicator flashes twice. G Settable items H MAIN When only using “MAIN ...

  • Denon AVR-3313CI - page 155

    Information 15 2 F Part names and functions v page153 F Other information v page159 F Troubleshooting v page171 F Specifications v page177 F Index v page178 Informations Here, we list various information related to this unit. Please refer to this information as needed. Basic version Adv anced version Infor mations Infor mations DVD ...

  • Denon AVR-3313CI - page 156

    15 3 Front panel For buttons not explained here, see the page indicated in parentheses ( ). q e w y t u i r q Power operation button ( X ) ··················································· ( 36 ) Turns power to this unit on and off (standby). w Power indicator ·················· ...

  • Denon AVR-3313CI - page 157

    15 4 Front panel With the door open For buttons not explained here, see the page indicated in parentheses ( ). Q4 Q5 Q6 Q8 Q3 Q1 Q0 Q2 o Q7 u i w t e r y q q AUX-HDMI connector ····························································· ( 11 ) w iPod/USB port ·············? ...

  • Denon AVR-3313CI - page 158

    15 5 Display t y r u i o Q0 Q1 Q2 q w e q Information display The input source name, sound mode, setting values and other information are displayed here. w Front speaker indicator This lights according to the setting of the front A and B speakers. e Output signal channel indicators Lights when audio signals are being output from the speakers. r Mas ...

  • Denon AVR-3313CI - page 159

    15 6 Rear panel See the page indicated in parentheses ( ). q w y t i u o Q0 Q1 Q2 Q3 Q4 Q5 e r q FM/AM antenna terminals (ANTENNA) ································ ( 24 ) w Analog audio connectors (AUDIO) ······················································ ( 16 ...

  • Denon AVR-3313CI - page 160

    15 7 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). q w e r y i Q0 Q1 Q2 Q3 u o Q5 Q6 Q7 W1 Q4 Q8 W2 W3 W4 Q9 W0 t q ZONE SELECT buttons (MAIN, 2, 3) ········································· ( 30 , 105 ) w Operation mode indicators ············· ( ...

  • Denon AVR-3313CI - page 161

    15 8 Remote control unit Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R6/AA e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control unit. • Replace the batteries with new ...

  • Denon AVR-3313CI - page 162

    15 9 Other information n Trademark information ( v page159 ) n Surround ( v page160 ) n Relationship between video signals and monitor output ( v page166 ) n Explanation of terms ( v page168 ) “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, re ...

  • Denon AVR-3313CI - page 163

    16 0 Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the sound mode to achieve the same sense of presence as in a movie theater. Sound modes and surround parameters This table shows the speakers that can be used in each sound mode and the surround parameters adjustable in each sound mode ...

  • Denon AVR-3313CI - page 164

    16 1 Surround Sound Mode ( v page75 ) Surround Parameter ( v page113 ) z 1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode. z 15 This item can be selected when a Dolby Digital or DTS signal is played. z 16 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played. z 17 This ...

  • Denon AVR-3313CI - page 165

    16 2 Surround Sound Mode ( v page75 ) Surround Parameter ( v page113 ) Subwoofer ( v page115 ) Tone z 19 ( v page115 ) Audyssey ( v page116 ) Restorer z 22 ( v page115 ) z 1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode. z 5 Only when “Subwoofer Mode” is set to “LFE+Main” ( v p ...

  • Denon AVR-3313CI - page 166

    16 3 Surround n Types of input signals, and corresponding sound modes This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode. Symbols in the table F This indicates the default sound mode. S This indicates the selectable sound mode. Sound Mode ( v page75 ) NOT ...

  • Denon AVR-3313CI - page 167

    16 4 Surround Sound Mode ( v page75 ) NOTE Input signal types and formats ANALOG PCM DTS-HD DTS DOLBY DOLBY DIGITAL Super Audio CD PCM (multi ch) PCM (2ch) DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY TrueHD DOLBY DIGITAL Plus DOLBY DIGITAL EX (With Flag ...

  • Denon AVR-3313CI - page 168

    16 5 Surround Sound Mode ( v page75 ) NOTE Input signal types and formats ANALOG PCM DTS-HD DTS DOLBY DOLBY DIGITAL Super Audio CD PCM (multi ch) PCM (2ch) DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY TrueHD DOLBY DIGITAL Plus DOLBY DIGITAL EX (With Flag ...

  • Denon AVR-3313CI - page 169

    16 6 Relationship between video signals and monitor output MAIN ZONE MONITOR OUT Video Conversion Input connector Output connector Menu displayed HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO On A A A A A A Only the menu is displayed A A On A A S S <VIDEO> S <VIDEO> S (VIDEO) A (VIDEO) On ASA S <COMPONENT> S <C ...

  • Denon AVR-3313CI - page 170

    16 7 Video signal resolution conversion table When “Video Conversion” ( v page121 ) is set to “On”, “i/p Scaler” ( v page 122 ) is set to “Analog”, “Analog & HDMI” or “HDMI” are set, the resolution of the input video signal can be converted to a different resolution for output ( v page6 “Converting input video ...

  • Denon AVR-3313CI - page 171

    16 8 Explanation of terms A Adobe RGB color, Adobe YCC601 color The color space defined by Adobe Systems Inc. Because it is a wider color space than RGB, it can produce more vivid and natural images. AirPlay AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod touch/iPad to a compatible device via the network. AL24 Processing Plu ...

  • Denon AVR-3313CI - page 172

    16 9 Dolby TrueHD Dolby TrueHD is a high definition audio technology developed by Dolby Laboratories, using lossless coding technology to faithfully reproduce the sound of the studio master. This format provides the facility to support up to 8 audio channels with a sampling frequency of 96 kHz/24 bit resolution and up to 6 audio channels with a sa ...

  • Denon AVR-3313CI - page 173

    17 0 P Progressive (sequential scanning) This is a scanning system of video signal that displays 1 frame of video as one image. Compared to the interlace system, this system provides images with less flickering and bleeding. Protection Circuit This is a function to prevent damage to devices within the power supply when an abnormality such as an ov ...

  • Denon AVR-3313CI - page 174

    17 1 Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malf ...

  • Denon AVR-3313CI - page 175

    17 2 Symptom Cause/Solution Page When the HDMI ZONE2 function is used, Dolby TrueHD/ DTS HD Master Audio/Dolby Digital/ DTS cannot be played back in MAIN ZONE. • Make sure that “HDMI Audio Out” in the menu is set to “AVR”. When a same input source is selected for MAIN ZONE and ZONE2, set the ZONE2 ON/OFF button to “OFF”, or change ...

  • Denon AVR-3313CI - page 176

    17 3 Symptom Cause/Solution Page No sound is produced from subwoofer. • Check the subwoofer connections. • Turn on the subwoofer’s power. • Set “Speaker Config.” – “Subwoofer” on the menu to “Yes”. • If “Front” and “Center” for “Speaker Config.” are set to “Large”, and “Subwoofer Mode” is se ...

  • Denon AVR-3313CI - page 177

    1 74 G iPod / USB memory device / Internet radio / Media server / Flickr / Pandora / SiriusXM H Symptom Cause/Solution Page iPod cannot be played. • Some iPods do not support being used connected directly to the iPod/USB port. 21 The file names are not displayed properly (“...”, etc.). • Characters that cannot be displayed are used. ...

  • Denon AVR-3313CI - page 178

    17 5 Symptom Cause/Solution Page Sound quality is poor or noise is heard during play. • File being played has a low bit rate. This is not a malfunction. – Cannot login to Pandora. (“Email address” or “Password” is displayed.) • Login information is incorrect. Check if the “Email address” for Pandora has been properly entered ...

  • Denon AVR-3313CI - page 179

    176 Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. X BACK INFO 1 Turn off the power using X . 2 Press X while simultaneously pressing INFO and BACK . 3 Once the display starts ashing at inter ...

  • Denon AVR-3313CI - page 180

    17 7 Specifications n Audio section • Power amplifier Rated output: Front: 125 W + 125 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Center: 125 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Surround: 125 W + 125 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.) ...

  • Denon AVR-3313CI - page 181

    17 8 v Numerics 2.1-channel ························································· 89 2ch Playback ···················································· 133 3D ·······································? ...

  • Denon AVR-3313CI - page 182

    17 9 v L Language ·························································· 140 Lch Level ·························································· 140 Levels ····································? ...

  • Denon AVR-3313CI - page 183

    18 0 List of preset codes AV R D Denon 73347 CBL/SA T group (0 zzzz ) CBL A A T&T 00858 B Bright House 01376, 01877 C Cable & Wireless 01068 Cable One 01376, 01877 Cablevision 01376, 01877 Charter 01376, 01877 Cisco 01877, 00858, 02378 Com Hem 02015 Comcast 01376, 01877 Cox 01376, 01877 D Daeryung 01877 F Freebox 01976 I Insight 01376, 0187 ...

  • Denon AVR-3313CI - page 184

    18 1 Strong 00879, 01284, 01409, 02418 Systec 01334 Sytech 02418 T TBoston 02418 T echnika 01284 T echniSat 01195 T echwood 01284 TELE System 01409 T elefonica 02262 T elestar 01195, 01334 T eleves 01334 T evion 01409 Thomson 00847, 01175, 01291 T oshiba 01284 T riax 01291, 01631 T ricolor TV 01176 U UEC 00879, 01356 United 02418 V VEA 02418 V este ...

  • Denon AVR-3313CI - page 185

    18 2 G Goodmans 11037 H Hitachi 11037 L LG 11423 Logik 11037 Luxor 11037 M Matsui 11037 P Panasonic 12170 Philips 11454, 10556 S Samsung 12051 SEG 11037 Sharp 10818 Sony 12778 Sylvania 11864 T T echnica 11037 T eletech 11037 Thomson 10625 T oshiba 11524 U United 11037 V V estel 11037 W Weltstar 11037 TV/VCR Combination F Ferguson 10625 G Grundig 10 ...

  • Denon AVR-3313CI - page 186

    18 3 Dimensions Unit : in. (mm) 13 21/64 (338.6) 14 29/32 (378.8) 9 21/64 (236.8) 2 5/32 (54.8) 1 27/32 (47.0) 19/32 (15.0) 5 63/64 (152.0) 6 37/64 (167.0) 17 3/32 (434.0) 13 25/64 (340.0) 2 23/64 (60.0) 1 27/32 (47.0) 1 27/32 (47.0) 47/64 (18.5) 55/64 (21.7) Weight : 26 lbs 7 oz (12.0 kg) Basic version Adv anced version Infor mations Infor mations ...

  • Denon AVR-3313CI - page 187

    D&M Holdings Inc. 3520 10084 00AD V00 www.denon.com ...

Fabricante Denon Categoría Stereo Receiver

Los documentos del dispositivo Denon AVR-3313CI que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Denon
- manuales de instrucciones AVR-3313CI
- hojas de producto Denon
- folletos informativos
- o etiquetas energéticas Denon AVR-3313CI
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Denon AVR-3313CI.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Denon AVR-3313CI, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Denon AVR-3313CI. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Denon AVR-3313CI.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Denon AVR-3313CI, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Denon AVR-3313CI. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Denon AVR-3313CI.

El manual de instrucciones completo de Denon debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Denon AVR-3313CI - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Denon AVR-3313CI, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Denon AVR-3313CI que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Denon AVR-3313CI - que deben facilitarnos los primeros pasos durante el uso de Denon AVR-3313CI
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Denon AVR-3313CI
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Denon AVR-3313CI en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Denon AVR-3313CI?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Denon AVR-3313CI, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Denon AVR-3313CI probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)