-
AEG HG654440SM - page 1
HG654440SM IE GB EN GAS HOB USER MANUAL ...
-
AEG HG654440SM - page 2
FOR PERFECT RESULTS Thank you for choosing th is AEG product. We have created it to give you impe ccable performance for many years, with innovative techno logies that help make life simpler – features you mi ght not find on ordinary appliances. Please spend a fe w minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the A ...
-
AEG HG654440SM - page 3
CONTENTS 4 Safety information 6 Installation 12 Product description 13 Operation 14 Helpful hints and tips 15 Care and cleaning 17 What to do if… 18 Technical data 19 Environment concerns The following symbols are used in this user manual : Important information concerning your personal safety and information on how to avoid damaging the applianc ...
-
AEG HG654440SM - page 4
SAFETY INFORMATIO N WARNING! These instructions are only valid in the countries whose symbols appear on this booklet's cover. For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the op ...
-
AEG HG654440SM - page 5
• Pots must not enter the control zone. • Do not use not stable cookware to prevent from tilt and accident. • Do not put flammable products or items that are wet with flammable products, and/or fusible objects (made of plastic or aluminium) and/or fabrics in, near or on the appliance. There is the risk of explosion or fire. • Use only the a ...
-
AEG HG654440SM - page 6
• This appliance is not connected to a combustion products evacuation device. It must b e installed and connected in accordance with current installation regulations. Particular attention must be given to the relevant requirements regarding ventilation. • The use of a gas cooking appliance cause heat and moisture in the room in which it is inst ...
-
AEG HG654440SM - page 7
Important safety requirements This hob must be installed in accordance with the Gas Safety (Installation and Use) Regula- tions (Current Edition) and the IEE Wiring Regulations (Current Edition). For appliances installed in the Republic of Ireland please refer to NSAI - Domestic Gas Instal- lation I.S. 813 Current Editions and the ETCI Rul es for E ...
-
AEG HG654440SM - page 8
1 2 3 1 End of shaft with nut 2 Washer 3 Elbow Connection to the gas supply should be with either rigid or semi - rigid pipe, i.e. steel or cop- per. The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread). When the final connection has been made, it is essential that a thorough leak test is carried out on the hob and instal ...
-
AEG HG654440SM - page 9
1. Light the burner. 2. Turn the knob on the minimum position. 3. Remove the knob. 4. With a thin screwdriver, adjust the by - pass screw position. 1 1 The by - pass screw – If you change from natural gas 20 mbar to liquid gas, fully tighten the by - pass screw in. – If you change from liquid gas to natural gas 20 mbar, undo the by - pass screw ...
-
AEG HG654440SM - page 10
This hob is designed to be connected to a 230 V 50 Hz AC electrical supply . Before switching on, make sure the electri city supply voltage is the same as that indicated on the hob rating plate. The rating plate is located on the bottom of the hob. The hob is supplied with a 3 core flexible supply cord incorporating a 3 amp plug fitted. In the even ...
-
AEG HG654440SM - page 11
Replacement of the connection cable To replace the connection cable use only H05V2V2 - F T90 or equivalent type. Make sure that the cable section is applicable to the voltage and the working temperature. The yellow / green earth wire must be approximately 2 cm longer than the brown (or black) phase wire. Building In min. 55 mm min. 650 mm 560 mm mi ...
-
AEG HG654440SM - page 12
b) Space for connections Kitchen unit with oven The hob recess dimensions must obey the indication and the kitchen unit must be equipped with vents to let a continuous supply of air. The electrical connection of the hob and the oven must be installed separately for safety reasons and to let easy remove oven fr om the unit. 50 cm 2 360 cm 2 180 cm 2 ...
-
AEG HG654440SM - page 13
OPERATION Ignition of the burner WARNING! Be very careful when you use open fire in kitchen environment. Manufacturer decline any responsibility in case misuse of the flame Always light the burner before you put cookware. To light the burner: 1. Turn the control knob counterclockwise to the maximum position ( ) and push it down. 2. Keep the control ...
-
AEG HG654440SM - page 14
1 Burner cap 2 Burner crown 3 Ignition candle 4 Thermocouple WARNING! Do not keep the control knob pushed for more than 15 seconds. If the burner does not light after 15 seconds, release the control knob, turn it into off posi- tion and try to light the burner again after minimum 1 minute. In the absence of electricity you can ignite the burner wit ...
-
AEG HG654440SM - page 15
WARNING! Use pots and pans with diameter applicable to the dimension of burner. Do not use cooking vessels on the hotplate that overlap its edges. Burner Diameters of cookware Triple Crown 180 - 260 mm Front Semi - rapid 120 - 180 mm Rear Semi - rapid 120 - 220 mm Auxiliary 80 - 160 mm WARNING! Pots must not enter the control zone. WARNING! Make su ...
-
AEG HG654440SM - page 16
• Stainless steel parts wash with water, and then dry with a soft cloth. • The pan supports are not dishwasher proof; they must be washed by hand . • When you wash the pan supports by hand, take care when you dry them as the enamel- ling process occasionally leaves rough edges. If necessary, remove stubborn stains using a paste cleaner. • M ...
-
AEG HG654440SM - page 17
WHAT TO DO IF… Problem Possible cause Remedy There is no s park when lighting the gas • There is no electrical su pply • Make sure that the unit is connected and the electrical supply is switched on. • Control the fuse. If the fuse is released more than one time, refer to a qualified electrician. • Burner cap and crown are placed uneven ? ...
-
AEG HG654440SM - page 18
MOD. PROD.NO. SER.NO DA T A MOD. PROD.NO. SER.NO DA T A MODEL MODEL MOD. PROD.NO. SER.NO. 03 IT MADE IN IT AL Y TYPE 230V -50Hz IP20 0049 1 2 3 1 Stick it on Guarantee Card and send this part 2 Stick it on Guarantee Card and keep this part 3 Stick it on instruction booklet These data are necessary to help you quickly and correctly. These data are a ...
-
AEG HG654440SM - page 19
Electric supply: 230 V ~ 50 Hz 3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge fuse Gas connection: G 1/2 " Category: II2H3+ Gas supply: G20 (2H) 20 mbar Appliance class: 3 By - pass diameters Burner Ø By - pass in 1/100 mm. Auxiliary 28 Semi - rapid 32 Triple Crown 56 Gas burners BURNER NORMA L POWER REDUCED POWE ...
-
AEG HG654440SM - page 20
Packaging material The packaging materials are friendly to the environment and can be recycled. The plastic components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as household waste at the waste disposal facilities in your municipality. 20 ...
-
AEG HG654440SM - page 21
21 ...
-
AEG HG654440SM - page 22
22 ...
-
AEG HG654440SM - page 23
23 ...
-
AEG HG654440SM - page 24
www.aeg.com/shop 397201901 - B - 052011 ...
¿Tienes una pregunta acerca de AEG HG654440SM?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con AEG HG654440SM, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con AEG HG654440SM probablemente compartirá una forma de solucionarlo.