-
Husqvarna 326HD75 - page 1
Oper ator's manual (C ARB II, EP A II) 326HD60 X-series 326HD75 X-series Please read these instructions car efully and make sur e you understand them bef ore using the machine. English ...
-
Husqvarna 326HD75 - page 2
2 – English SYMBOL EXPLANA TION W ARNING! The hedge trimmer can be dangerous! Careless or incorrect use can result in serious, even fatal injury . Symbols • This product is in accordance with applicable CE directives. • Always wear approved protective gloves. Checks and/or maintenance should be carried out with the engine switched off, with t ...
-
Husqvarna 326HD75 - page 3
English – 3 List of contents SYMBOL EXPLANA TION Symbols ............................................................................... 2 CONTENTS List of contents .................................................................... 3 SAFETY INSTRUCTIONS P ersonal protective equipment ............................................. 4 The machine ? ...
-
Husqvarna 326HD75 - page 4
4 – English The machine’ s protective equipment This section describes the hedge trimmer ’ s protective equip- ment, its function and how checks and maintenance ar e carried out to ensure that it operates corr ectly . (See the chapter ”What is what” to locate where this equipment is positioned on your machine.) IMPORT ANT INFORMA TION • ...
-
Husqvarna 326HD75 - page 5
English – 5 4. Vibration damping system The hedge trimmer is equipped with a vibration damping system, which is designed to give as vibra- tion-free and comfortable use as possible. The hedge trimmer ’ s vibration damping system reduces the transfer of vibrations between the engine unit/blades and the hedge trimmer ’ s handles. The engine bod ...
-
Husqvarna 326HD75 - page 6
6 – English SAFETY INSTR UCTIONS Control, maintenance and service of the hedge trimmer ’ s protective equipment 2. Stop switch • Start the engine and make sure that the engine stops when the stop switch is moved to the stop position. 3. Hand guard • Ensure that the blade guard is fitted correctly . • Make sure the hand guard is not damage ...
-
Husqvarna 326HD75 - page 7
English – 7 SAFETY INSTR UCTIONS 5. Muffler • N ever use a machine that has a defective muffler . • Check regularly that the muffler is secure. • If your muffler is fitted with a spark arrest screen then it should be cleaned regularly . A blocked screen leads to the engine overheating with serious damage as a result. N ever use a muffler wi ...
-
Husqvarna 326HD75 - page 8
8 – English IMPORT ANT INFORMA TION • The machine is only designed for cutting branches and twigs. • Never use the machine if you are tired, if you have consumed alcohol, or if you are taking medicines that can affect your sight, your judgement or the control of your body . • Use personal protective equipment. See the section ” Personal p ...
-
Husqvarna 326HD75 - page 9
English – 9 SAFETY INSTR UCTIONS Safety instructions when using the hedge trimmer Protective instructions while working • Always ensure you have a safe and firm working position. • Always use both hands to hold the machine. Hold the machine in front of you. • Make sure that your hands and feet cannot come into contact with the blades when t ...
-
Husqvarna 326HD75 - page 10
10 – English Basic working techniques • The hedge trimmer ’ s rear handle can be set in three positions by pulling out the catch. See figure. When the handle is adjusted the hedge trimmer should be idling or not running. • While working the handle should always be facing upwards irr espec- tive of how the hedge trimmer is directed. • When ...
-
Husqvarna 326HD75 - page 11
English – 11 WHA T IS WHA T? 13. Lock for handle 14. F uel tank 15. F uel cap 16. Air purge 17. Choke 18. Air filter co ver 19. Hand guar d 20. T ube of grease 21. Allen key 22. S park plug spanner 23. Blade co ver (T ransport) What is what on the hedge trimmer? 1. Operator ’ s Manual 2. Gr ease filler cap 3. Gearbox 4. Blades 5. Blade guard 6. ...
-
Husqvarna 326HD75 - page 12
12 – English FUEL HANDLING Fuel mixture • Clean around the fuel cap. Contamination in the tank can disrupt operations. • Ensure that the fuel is well mixed by shaking the container before filling the tank. Fuelling 5 10 15 20 0,10 0,20 0,30 0,40 Gasoline Oil 2%(1:50) 1 2 1/2 5 2 1/2 6 1/2 12 7/8 US gallon US fl. oz. Lit. Lit. NO TE! The machi ...
-
Husqvarna 326HD75 - page 13
English – 13 Warm engine IGNITION: Set the stop switch to the start position. CHOKE: Set the choke control in the choke position and then back again to its original position (B) In this way only the start throttle is applied with no choke. AIR PUR GE: P ress the air purge diaphragm repeatedly until fuel begins to fill the diaphragm. The diaphragm ...
-
Husqvarna 326HD75 - page 14
14 – English MAINTENANCE Carburetor Y our H usqvarna pr oduct has been designed and manufactured to specifications that reduce harmful emissions. After your unit has been run 8-10 tanks of fuel the engine has broken in. T o ensure that your unit is at peak performance and producing the least amount of harmful emissions after break in, have your a ...
-
Husqvarna 326HD75 - page 15
English – 15 MAINTENANCE Cooling system T o maintain as low opera- ting temperature as possible the engine is equipped with a cooling system. The cooling system consists of: 1. An air intake on the starter unit. 2. Cooling fins on the flywheel. 3. Cooling fins on the cylinder 4. Cylinder co ver (leads cold air onto the cylin- der). Clean the cool ...
-
Husqvarna 326HD75 - page 16
16 – English MAINTENANCE Spark plug The condition of the spark plug is affected by: • An incorrect carburetor setting. • An incorrect fuel mixture (too much or faulty oil). • A dirty air filter . These factors cause deposits on the spark plug electr ode that may result in malfunction or starting difficulties. Air filter The air filter (A) s ...
-
Husqvarna 326HD75 - page 17
English – 17 Maintenance schedule Below you will find some general maintenance instructions. Daily maintenance • Check throttle trigger and throttle trigger lockout function. • Check stop switch function. • Check that the blades do not rotate while idling or when the choke is in the start position. • Clean the exterior of the machine. • ...
-
Husqvarna 326HD75 - page 18
18 – English 326HD60 1,55/25,4 1,34/34 1,10/28 2 700 11 000-11 700 0,9 kW/ 9 000 rpm Ye s Ye s W albro MB Champion R CJ 7Y 0,02/0,5 Zama C1Q 1,0/0,5 5,7 98 2,8/2,8 5,7/6,4 Double sided 600 4 695 T echnical data Engine Displacement, cu in/cm 3 Cylinder bor e, inch/mm S troke length, inch/mm I dling speed, rpm Recommended max. speed rpm Max. engine ...
-
Husqvarna 326HD75 - page 19
English – 19 If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Husqvarna Forest & Garden at 1-800- 487-5963. WARRANTY PERIOD Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular ...
-
Husqvarna 326HD75 - page 20
20 – English ...
-
Husqvarna 326HD75 - page 21
English – 21 ...
-
Husqvarna 326HD75 - page 22
´+H!Q¶3r¨ ...
-
Husqvarna 326HD75 - page 23
English – 23 ...
-
Husqvarna 326HD75 - page 24
2002W02 ´+H!Q¶3r¨ 114 00 14-93 ...
¿Tienes una pregunta acerca de Husqvarna 326HD75?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Husqvarna 326HD75, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Husqvarna 326HD75 probablemente compartirá una forma de solucionarlo.