-
Mackie X.200 - page 1
QUICK - S T ART GUIDE X .200 ...
-
Mackie X.200 - page 2
Part No. 0012120 Rev . 3 10/04 ©2004 LOUD T echnologies Inc. All Rights Reserved. 2 X.2 00 Digital X Bus T able of Cont ents Intr oduction ................................................................................................................ 3 Getting Star ted .............................................................................. ...
-
Mackie X.200 - page 3
3 Quick-Start Guide Quick -Start Guide Intr oduction Note: As new software releases be- come available, they can be download- ed from the Mackie website by going to the Digital X Bus webpage at: http://www .mackie.com/products/digitalxbus. Y ou will need a USB fl ash drive (a.k.a. thumb- drive) to transfer the installer package from your computer ...
-
Mackie X.200 - page 4
4 X.2 00 Digital X Bus Get ting Started I/ O Car ds 1. MIC/LINE 4 CARD This card has four female XLR balanced micro- phone inputs, and four 1/4" TRS balanced/unbalanced line-level inputs, for a total of eight analog inputs. Note that this card does not provide any outputs. 2. MIC/LINE 8 CARD The Mic/Line 8 card has two DB25 connectors, one for ...
-
Mackie X.200 - page 5
5 Quick-Start Guide Quick -Start Guide 4. DIGIT AL CARD This card provides eight channels of digital I/O in two formats; TDIF on a DB25 connector and ADA T optical on four TOSLINK connectors. At 44.1/48 kHz sample rates, each optical TOSLINK connector provides either eight inputs or eight outputs of digital audio. At 88.2/96 kHz sample rates, the S ...
-
Mackie X.200 - page 6
6 X.2 00 Digital X Bus 8. S YNC CARD The Sync card provides the digital word clock in and out on a pair of BNC connectors, and SMPTE time code in and out on a pair of 1/4" jacks. Sync data is also transmitted through the ADA T lightpipe and AES/EBU connections. The Sync card just provides another means to transmit and receive the word clock. T ...
-
Mackie X.200 - page 7
7 Quick-Start Guide Quick -Start Guide 15. P ower Swit ch This one is self-explanatory . When the POWER switch is turned ON, power is supplied to the Digital X Bus and it boots up. When turning off the Digital X Bus, you should select Shutdown from the File menu. At the end of the shutdown procedure, the touchscreens go blank, indicating that it is ...
-
Mackie X.200 - page 8
8 X.2 00 Digital X Bus Oper ational Basics Are you ready to get started? Let ’ s turn on the Digital X Bus and go over some of the general operational features before we start passing audio through it. T urning on the Digital X Bus Connect the supplied power cord to the male IEC connector on the rear panel. Plug the other end of the power cord in ...
-
Mackie X.200 - page 9
9 Quick-Start Guide Quick -Start Guide 5. Make sure channel 1 has Input 1 assigned to it. Open the Assign window (W indows > Assign). Under the Input Src drop-down box select Mic Line In. 1. 6. If the microphone requires phantom power , select the 48V button in the Assign window to turn on phantom power . Leave the – 10 dB pad off when using a ...
-
Mackie X.200 - page 10
10 X.2 00 Digital X Bus 9. Connect the Left and Right Speaker Outs (A) from the Mix Out card to the inputs of your ste- reo power ampli fi er (or powered monitor speak- ers). These outputs are balanced when using a TRS (tip-ring-sleeve) connector , or unbalanced when using a TS (tip-sleeve) connector . Use instrument/line-level cable for this conn ...
-
Mackie X.200 - page 11
11 Quick-Start Guide Quick -Start Guide 21. In the Reverb panel, click the Src L drop-down box and select Channel Post Insert > Ch. 1 Post. This places the reverb in the post-insert loop on channel 1. 22. Adjust the reverb parameters using the V -Pots at the bottom of the Effects Rack. Y ou should see the Left Input and Output meters move as you ...
-
Mackie X.200 - page 12
12 X.2 00 Digital X Bus Hookup Diagr ams One of the primary applications for the X.200 is multitrack recording. This involves tracking and monitoring, bouncing, overdubbing, and mixdown. A typical application might involve 24 inputs for tracking and 24 outputs to a multitrack recorder or DA W (Digital Audio W orkstation). In this case, you might ha ...
-
Mackie X.200 - page 13
13 Quick-Start Guide Quick -Start Guide WORD CLOCK SYNC CARD IN OUT IN OUT SMPTE A B MIX OUT CARD SPDIF SPEAKERS PHONES MIX OUT IN OUT IN LR 12 LR LR OUT AES/EBU DIGITAL CARD OPTICAL TDIF I/O IN A IN B OUT A OUT B DIGITAL CARD OPTICAL TDIF I/O IN A IN B OUT A OUT B DIGITAL CARD OPTICAL TDIF I/O IN A IN B OUT A OUT B MIC/LINE 4 CARD 5 7 6 8 1 2 3 4 ...
-
Mackie X.200 - page 14
14 X.2 00 Digital X Bus WORD CLOCK SYNC CARD IN OUT IN OUT SMPTE A B MIX OUT CARD SPDIF SPEAKERS PHONES MIX OUT IN OUT IN LR 12 LR LR OUT AES/EBU DIGITAL CARD OPTICAL TDIF I/O IN A IN B OUT A OUT B DIGITAL CARD OPTICAL TDIF I/O IN A IN B OUT A OUT B DIGITAL CARD OPTICAL TDIF I/O IN A IN B OUT A OUT B MIC/LINE 4 CARD 5 7 6 8 1 2 3 4 MIC/LINE 4 CARD ...
-
Mackie X.200 - page 15
15 Quick-Start Guide Quick -Start Guide WORD CLOCK SYNC CARD IN OUT IN OUT SMPTE A B MIX OUT CARD SPDIF SPEAKERS PHONES MIX OUT IN OUT IN LR 12 LR LR OUT AES/EBU MIC/LINE 4 CARD 5 7 6 8 1 2 3 4 MIC/LINE 4 CARD 5 7 6 8 1 2 3 4 MIC/LINE 4 CARD 5 7 6 8 1 2 3 4 I/O AES CARD I/O AES CARD I/O AES CARD OUT LINE CARD IN SERIAL NUMBER RISK OF ELECTRIC SHOCK ...
-
Mackie X.200 - page 16
16220 W ood-Red Road NE • Woodinville, W A 98072 • USA www .mackie.com • sales@mackie.com United States and Canada: 800.898.3211 Europe, Asia, Central and South America: 425.487 .4333 F ax: 425.487 .4337 Middle East and Africa: 31.20.654.4000 ...
¿Tienes una pregunta acerca de Mackie X.200?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Mackie X.200, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Mackie X.200 probablemente compartirá una forma de solucionarlo.