-
Teac HD-1 - page 1
77-20SR45I00020 Z HD Radio TM Receiver OWNER’S MANUAL HD-1 ENGLISH SLEEP PRESET MUTING ALARM 1 HD Radio Receiver HD-1 ALARM 2 EQ HD-1.indd 21 2008.12.17 9:21:44 AM ...
-
Teac HD-1 - page 2
2 IMPOR T ANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions. 8) Do not install near any heat s ...
-
Teac HD-1 - page 3
3 ENGLISH CAUTION < DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE P ARTS ARE WITHIN! < IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT , CONT ACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REP AIRED. < USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTH ...
-
Teac HD-1 - page 4
4 Befor e Using the Unit Read this before operation < As the unit may become warm during operation, always leave sufficient space ar ound the unit for ventilation. < The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regar ding this matter , consult an electrician. < Choose the i ...
-
Teac HD-1 - page 5
Connection CAUTION < Switch off (standby) the power before making connections. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely . T o prevent hum and noise, do not bundle the connection cor ds . A AC power cord B Phones jack C Line out jack D AUX IN jack E Video out jack F A ...
-
Teac HD-1 - page 6
6 Connection A AC Power Cord Be sure to connect the power cord to an AC outlet which supplies the correct voltage. Hold the power plug when plugging or unplugging the power cord. Never pull or yank on the power cor d. B Phones jack For private listening, first reduce the volume level to minimum. Then insert the plug from your headphones into the PH ...
-
Teac HD-1 - page 7
ENGLISH 7 Unit Functions NOTE : T o simplify explanations, instructions in this manual refer to the names of the buttons and controls on the front panel only . Associated controls on the remote control will also operate similarly . V O L U M E S TA N D B Y / ON ME M O RY C LO CK A D J SL EE P PR E SE T M U T IN G A LA R M 2 E Q A LA R M 1 T U N IN ...
-
Teac HD-1 - page 8
8 Unit Functions A Speakers (Stereo) B PLA Y/P AUSE ( y / J ) In iPod mode, use this button to start or pause playback. C FUNCTION Use these buttons to select the source you want to listen to. D ST ANDBY/ON ( ) Use this button to turn the unit on or standby . E PRESET In TUNER mode, use these buttons to select a preset station. F HD T AG One touch ...
-
Teac HD-1 - page 9
ENGLISH 9 Display A iPod or iPhone indicator B HD Radio indicator C FM STEREO indicator D Band FM/AM, clock, AM/PM indicator E T ime/Frequency Readout F SLEEP indicator G ALARM 1 indicator H ALARM 2 indicator I RBDS Messages/FUNCTION indicator B E G F H I D A C The provided Remote Control Unit allows the unit to be operated from a distance. When op ...
-
Teac HD-1 - page 10
10 The HD-1comes mounted with an adapter for iPod with “iPod cl as si c (1 60 G) +i Ph on e 2G / 3G ”. T o p la y y o ur i Po d t hr ou gh t he HD-1, you have first to check if the factory mounted adapter fits your model of iPod. If it does not, you have to replace it with a correct one, as explained below . 1 Remove the adapter from the Dock o ...
-
Teac HD-1 - page 11
ENGLISH 11 EQ FUNCTION Pres s t he EQ button to select ROCK, POP , CLASSIC, JAZZ, BASS or NORMAL for the desired sound ef fect. MUTING FUNCTION T o mute the sound temporarily , press the MUTING button. Press the MUTING button again to r estore the sound. < The "MUTE" indicator lights on the display to indicate that the muting is engage ...
-
Teac HD-1 - page 12
12 Listening to the Radio Extend the FM wire antenna fully for best reception (do not strip, alter or attach to other antennas). The AM loop antenna should be placed up to 12" away from the unit for best reception. Rotate the AM loop antenna as requir ed for best reception. 1 Press the ST ANDBY/ON button to turn on the unit. 2 P re s s t h e F ...
-
Teac HD-1 - page 13
ENGLISH 13 T o select FM or AM , press the FUNCTION/W AKE TO button. Y ou can listen to your favorite radio stations on this unit by turning the TUNING/SELECT knob (or pressing . o r / on the remote contr ol). When an HD Radio signal is received, the HD icon lights on the display . NOTE : • When an analog signal is received, the HD icon is not di ...
-
Teac HD-1 - page 14
14 Listening to your iPod or iPhone 1 Insert the iPod or iPhone into the Dock 2 Press the ST ANDBY/ON button to turn on the unit. 3 T o select iPod mode Press the FUNCTION/WAKE TO button (or pr ess FUNCTION button on the remote control) to select iPod mode. Y ou will hear the music playing from your iPod or iPhone, and an iPod or iPhone icon will a ...
-
Teac HD-1 - page 15
ENGLISH 15 3 T urn on and play your device. 4 T ur n th e VOLUME kn ob on t he un it (or p ress V olume+/- buttons on the remote control) to adjust the system volume. Y ou may need to adjust your device volume, too. When using the PHONES jack of your mini player , you must adjust the volume of the mini player or you may hear no sound from your HD-1 ...
-
Teac HD-1 - page 16
16 Setting the Clock Time and Calendar 1 Press and hold the Clock ADJ Button located on the top of the unit until 12H or 24H appear ed. Select your desired clock display either 12 hour or 24 hour by tur ning TUNING / SELECT Knob (or press . or / on the remote control). Then press the Clock ADJ Button again to confirm 12H or 24H mode setting. 2 The ...
-
Teac HD-1 - page 17
ENGLISH 17 DIMMER function Y ou can change the front panel’ s display brightness. Use the DIMMER button to change the brightness among 4 levels. Y ou can change display brightness by using DIMMEN botton. How to use the snooze function After the ON time is reached, press the SNOOZE button and the unit will turn off for 6 minutes then turn on again ...
-
Teac HD-1 - page 18
18 1 When the HD-1 is OFF or while listening to your iPod or the radio, press the SLEEP button to enter sleep mode. 2 Y ou can adjust the sleep timer from 120, 90, 75, 60, 45, 30, 15 minutes by pressing the SLEEP button again. • By the "SLEEP" mode, the" " icon is blinking on the display . • Pressing the SLEEP button to “0 ...
-
Teac HD-1 - page 19
ENGLISH 19 If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center . General The unit does not turn on. The AC plug may not be connected properly . Check the connection. The wall outlet may not function. T ry another outlet. When playing music, th ...
-
Teac HD-1 - page 20
Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your r ecords. Model number Serial number SKTE -T0811002 PREP ARED IN CHINA NOV 2 0 0 8 TEA C CO RPOR A TION 1- 47, Oc hia i, T ama -s hi, T o kyo 20 6-8 530 , J apa n Ph one : ( 042 ) 3 56 -91 55 TEAC AMERICA, INC. 7 ...
¿Tienes una pregunta acerca de Teac HD-1?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Teac HD-1, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Teac HD-1 probablemente compartirá una forma de solucionarlo.