-
Craftsman 973.111430 - page 1
10/03/01 WED 13:43 FAX 864 064 3314 RYOBI CUSTOMER SERVICE _002/015 Owner's Manual 318 in., 16.8 VOLT CORDLESS DRILL-DRIVER Variable Speed / Reversible Model No. 973.111430 Save this manual for future reference CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3 ...
-
Craftsman 973.111430 - page 2
10/03/01 WED 13:44 FAZ 864 964 3314 RYOBI CUSTOMER SERVICE _003/O15 • Warranty ....................................................................................................................................... 2 • Introduction and Product Specifications ....................................................................................... ...
-
Craftsman 973.111430 - page 3
10/03/01 WED 13:44 FAX 884 964 3314 RYOBI CUSTOMER SERVICE [_004/015 The purpose of safety symbols Is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding, The safety warnings do not by themselves eliminate any danger, The Instructions or warnings they gi ...
-
Craftsman 973.111430 - page 4
10/03/01 WED 13:44 FAX 864 964 3314 RYOBI CUSTOMER SERVICE _005/015 RULES FOR SAFE OPERATION (Continued) II NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal sparking of the motor could ignite flam- mable liquids, gases, or fumes. KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always Use a clean cloth when cleaning. Never use brake fluids, gasol ...
-
Craftsman 973.111430 - page 5
10/03/01 _ED 13:45 FAX 864 964 3314 RYOBI ¢UST0_[ER SERVICE _006/015 RULES FOR SAFE OPERATION (Continued) • An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a dsk of fire and electric shock. If extension cord must be used. make sure: a. That pins on plug of extension cord are the sa ...
-
Craftsman 973.111430 - page 6
10/03/01 WED 13:45 FAX 864 964 3314 RYOBI CUSTOMER SERVICE [_007/O15 The following recommended accessories are currently available at Sears Retail Stores. • 6-Pc. Extra Length Magnits Power Bit Set II High Speed Bits (FOrWood or Metal)..3/4 in. Max. II 30-Pc. Power Screwddver/NutddverSet and Case • Keyless Chuck (Item No, _-20988) II 17-Pc. Pow ...
-
Craftsman 973.111430 - page 7
10/O3/O1 WED 13:45 FAX 864 964 3314 RYOBI CUSTOMER SERVICE [_008/015 tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. & o a careless fraction of a second is sufficient to inflict severe injury. CHARGING BA'I-FERY PACK The battery pack for this tool has been shipped In a low ...
-
Craftsman 973.111430 - page 8
to/03io1 WED 13:45 FAX 864 964 3314 RYOBI OUSTO_R SERVICE _oo9/o15 SWITCH See Figure 2. To turn your ddll ON. depress the switchtrigger. To turn it OFF, release the switchtrigger. SELECTOR Fig. 2 VARIABLE SPEED This tool has a variable speed switch that delivers higher speed and torque with increasedtrigger pressure. Speed is controlled by the amou ...
-
Craftsman 973.111430 - page 9
10/03/01 WED 13:46 FAX 884 084 3314 RYOBI CUST0_ER SERVICE _010/015 SWITCH LOCK See Figure 5.. The switch trigger can be locked In the OFF position. This feature can be used to prevent the poasibNity of accidental sta_lng when not in use. To lock switch trigger, place the direction of rotation selector in center position. CENTER POSITION (LOCK) FOR ...
-
Craftsman 973.111430 - page 10
10103101 WED 13:46 FAX 864 964 3314 RYOBI CUSTOMER SERVICE [_011/015 INSTALLING BITS See FTgure 7.. • Lock the switch trigger by placing the directionof rotation selector in center position. See Figure 5. • Open or close chuck jaws to a pointwhere the opening is slightly larger than the bit size you Intend to use. Also, raise the front of your ...
-
Craftsman 973.111430 - page 11
10/03/01 WED 13:46 FAX 864 964 3314 RYOBI CUSTOMER SERVICE [_012/015 Note: Remember the two-speed feature (RI-LO) when setting torque. The amount of torque will vary depend- ing on which speed se_ng you have your drill-driver, Switching to LO speed will increase torque. Switching to HI speed witl decrease torque. BIT STORAGE See F/_ute TO, When not ...
-
Craftsman 973.111430 - page 12
10/03!01 WED 13:47 FAX 864 964 3314 RYOBI CUSTOMER SERVICE [_013/015 CHUCK REMOVAL Gee Figures f3, 14, and 15. The chuck must be removed in order to use some accessories, To remove: II Lock the switch trigger by placing the directionof rotation selector,in center position. See F/gum 5. El Insert a 5/16 Inch or larger hex key wrench into the chuck o ...
-
Craftsman 973.111430 - page 13
10103/01 WED 13:47 FAX 864 964 .3314 RYOBI CUSTOMER SERVICE [_]014/015 part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastice are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust. oil, grease, etc. oils, e ...
-
Craftsman 973.111430 - page 14
10/03/01 WED 13:47 FAX 864 964 3314 RYOBI CUSTOMER SERVICE _015/015 .---- CRAFTSMAN 3/8 In,, 16.8 VOLT CORDLESS DRILL-DRIVER- MODEL NO, 973.111430 _- The model number will be found on a plate attached to the motor housing. Always mention the model number in ell correspondence regarding your 3/8 in., 16.8 VOLT CORDLESS DRILL=DRIVER or when ordering ...
¿Tienes una pregunta acerca de Craftsman 973.111430?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Craftsman 973.111430, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Craftsman 973.111430 probablemente compartirá una forma de solucionarlo.