-
ATEN CE-700 - page 1
User Manual CE-700 Read this guide thoroughly and follow the installation and operation procedures carefully in order to prevent any damage to the units and/or any devices that connect to them. This package contains: M 1 CE-700L USB Console Extender (Local Unit) M 1 CE-700R USB Console Extender (Remote Unit) M 1 CS Custom USB KVM Cable M 2 Power Ad ...
-
ATEN CE-700 - page 2
Note: This equipment has been tested and found to comply wi th the limits for a Class B digital dev ice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reas onable protection against harmful interference in a resid ential inst alla tion. T his equipment generates, uses and can radiate radi o frequency energy, and if not ...
-
ATEN CE-700 - page 3
Overview The CE-700 is a USB (Universal Serial Bus) based KVM Extender that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse). Because it allows access to a computer system from a remote console, the CE-700 is perfect for use in any type of installat ion where you need to place the console where it ...
-
ATEN CE-700 - page 4
Features M Category 5 Ethernet Cable to Connect the Local and Remote Units (Up to 150 m Apart) M Auto Signal Compensaton (ASC) M USB Keyboard and USB Mouse Ports M Dual Console Operation - Control Your System From Both the Local and Remote USB Keyboard, USB Mouse, and Monitor Consoles M USB Overcurrent Detection and Prevention M Push Button Selecti ...
-
ATEN CE-700 - page 5
System Requirements Consoles M A VGA, SVGA, or Multisync monit or capable of the highest resolution that you will be using on any computer in the installation M A USB Keyboard M A USB Mouse Note: 1. If you connect a DDC type monitor to the Local unit, the monitor that connects to the Remote unit must be able to support the highest video resolution ...
-
ATEN CE-700 - page 6
The Local Unit (CE-700L) Front View: 1. Operating Mode Selection Switch Pressing this button toggles between the operating mode choices: M Local - only the local console can control the system(s); M Auto - both consoles can control the system(s). 2. LEDs The Local Unit has two LEDs to indicate the operating status of the Local and Remote units (see ...
-
ATEN CE-700 - page 7
Rear View: 1. USB Port The USB B Connector of the USB KVM Custom Cable supplied with this package plugs in here. 2. Monitor Po rt The HDB-15 VGA Connector of the USB KVM Custom Cable supplied with this package plugs in here. Note: If you are combining the CE-700 with a KVM switch, the extension cable connects back to the respective ports on the Con ...
-
ATEN CE-700 - page 8
The Remote Unit (CE-700R) Front View: 1. LEDs The Remote Unit has two LEDs (Status and On Line) to indicate the operating status of the Local and Remote units (see p. 9, for details). 2. USB Keyboard and Mouse Port The remote USB keyboard and USB mouse plug into these connectors. 3. Monitor Po rt The remote monitor plugs into this connector. 4. Rem ...
-
ATEN CE-700 - page 9
Installation Setting up the KVM Extender System is simply a matter of plugging in the cables: 1. Make sure that all the equipment to be connected up is powered Off. 2. Plug the cables from the local console devices (mouse, keyboard, monitor), into their ports on the Console side of the Local Unit (CE-700L). 3. Plug the appropriate connectors on the ...
-
ATEN CE-700 - page 10
- 8 - R E M O T E I / O AC 9 V CE-700L Rear View CE-700L F rontView CE-700R 2002-02-18 ...
-
ATEN CE-700 - page 11
Operation The Local and Remote Units each have two LEDs to indicate their operating status, as shown in the tables, below: CE-700L (Local Unit): Operating Mode LEDs Local Remote Local Console Active FLASH OFF Remote Console Active OFF FLASH Error / Disconnect ON OFF Not Ready OFF OFF Neither Console Active ON ON CE-700R (Remote Unit): Operating Mod ...
-
ATEN CE-700 - page 12
Appendix Troubleshooting Symptom Action No Video Make sure that all cables are securely plugged into their sockets. TP Pin Assignments Pin Assignment 1 V OUT B 2 /V OUT B 3 V OUT G 4 V OUT R 5 /V OUT R 6 /V OUT G 7 /DO 8 DO - 10 - 2002-02-18 ...
-
ATEN CE-700 - page 13
TP Wiring Diagrams - 11 - JA CK POSITIONS P AIR 2 P AIR 1 P AIR 3 P AIR 4 T568B A T&T 258A W-O W- G O G W-Br Br Bl W-Bl 1 23456 78 1 2 3 6 4 5 7 8 1 WHITE/ORANGE /VOUTB 2 ORANGE VOUTB 3 WHITE/GREEN /VOUTG 6 GREEN VOUTG 4 BLUE /VOUTR 5 WHITE/BLUE VOUTR 7 WHITE/BROWN /DO 8 BROWN DO 2002-02-18 ...
-
ATEN CE-700 - page 14
Specifications Function CE-700L CE-700R Console Connectors Keyboard USB Type A Mouse USB Type A Monitor 1 x 15 pin HDB Female 1 x 15 pin HDB Female Unit To Unit 8P8C Jack CPU Connectors Keyboard / Mouse USB Type B N/A Video 1 x 15 pin HDB Male N/A LEDs 1 Local 1 Remote 1 Status 1 On Line Function Keys Local/Auto Select Button N/A Cable Length 150m ...
-
ATEN CE-700 - page 15
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR ’ S LIABI LI TY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCI DENT AL, OR CONSEQUENTIAL DAMAGES RESULTING FRO M THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENT AT ION. The direct vendor makes no warranty or representation, expressed, implied, or statutory wit h respec ...
-
ATEN CE-700 - page 16
- 14 - 2002-02-18 ...
¿Tienes una pregunta acerca de ATEN CE-700?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con ATEN CE-700, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con ATEN CE-700 probablemente compartirá una forma de solucionarlo.