-
Hitachi 28LD5000TA - page 1
1 ENGLISH USER'S MANUAL Thank you very much for purchasing the HITACHI LCD Monitor. Before using your monitor, please carefully read the "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" so you will know how to operate the monitor properly. Keep this manual in a safe place. You will find it useful in the future. Notes on ...
-
Hitachi 28LD5000TA - page 2
2 Important Please read this User's Manual thoroughly, especially the Safety Instructions on Page 4 to 7. Mis-use may cause damage to your LCD monitor, which could shorten its lifespan, or cause injury to yourself. Should you encounter any difficulty in the set-up or operation of your monitor, firstly refer to the Troubleshooting guide at the ...
-
Hitachi 28LD5000TA - page 3
3 ENGLISH CONTENTS FEATURES ....................................................2 SAFETY INSTRUCTIONS ..............................4 COMPONENT NAMES ..................................8 Main Unit ..............................................................................8 Remote control ........................................................... ...
-
Hitachi 28LD5000TA - page 4
4 SAFETY INSTRUCTIONS This LCD monitor has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. Before using this product, please read and understand the Safety Instructions thoroughly to ensure correct usage, a ...
-
Hitachi 28LD5000TA - page 5
5 ENGLISH • FOR THE CUSTOMERS IN THE U.K. THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE. FOR THE U.K. PLEASE REFER TO THE NOTES ON THIS PAGE. IMPORTANT FOR UNITED KINGDOM WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS The mains lead on this equipment is supplied with a molded plug incorporating a fuse, ...
-
Hitachi 28LD5000TA - page 6
6 PRECAUTIONS • Installation environment Do not obstruct a ventilation hole. Do not put the monitor on carpet or blanket, or near a curtain which has a possibility of obstructing a ventilation hole of the monitor. Do not put the monitor in the following places. • Hot places such as near heater, place exposed to the direct rays of the sun. • A ...
-
Hitachi 28LD5000TA - page 7
7 ENGLISH • Prevention of an obstacle to Radio receivers This monitor has been designed pursuant to the international EMI standards. This is to prevent a problem to Radio receivers. - Keep the monitor away from Radio. - Adjust Radio antennas in order for the monitor not to receive interference. - The antenna cable of Radio should be kept away fro ...
-
Hitachi 28LD5000TA - page 8
8 Caution when moving the main unit • As this product is heavy, whenever it is moved, two people are required to transport it safely. • Whenever the unit is moved it should be gripped on the top of the panel and the unit should then be held at the base on both sides for stability as shown. COMPONENT NAMES Front Cabinet (front frame) Panel Remot ...
-
Hitachi 28LD5000TA - page 9
9 ENGLISH COMPONENT NAMES Remote control POWER ON / OFF button PICTURE MODE button SURROUND button Loading Batteries 1. Open the battery cover. • Slide back and remove the battery cover in the direction of the arrow. 2. Load batteries. • Load two Size AA batteries included observing the correct polarities. 3. Close the battery cover. • Replac ...
-
Hitachi 28LD5000TA - page 10
10 COMPONENT NAMES (continued) Remote control (continued) D / N A / B i + M E NU O K FR EE Z E Z OO M A V 1 R G B 1 R G B 2 A V 2 A V 3 A V 4 2 - 4 - 12 I / II P+ P- + - D V D 12 3 45 6 78 0 9 PICTURE MODE INPUT SELECT RECALL DVD CONTROL PROGRAM SELECT TIME AUDIO MODE Y ou may recall the sound mode by pressing this button. Each time pressed, sound ...
-
Hitachi 28LD5000TA - page 11
11 ENGLISH Anti-tumble measures Securing to a wall or pillar Using a commercially available cord, chain and clamp, secure the set to a firm wall or pillar. Securing desktop 1) Using wood screws (two), fasten the set to the clamping screw holes on the rear of the stand as shown. 2) Using commercially available wood screws, secure the set firmly in p ...
-
Hitachi 28LD5000TA - page 12
12 Read SAFETY INSTRUCTIONS ( to ) carefully to ensure maximum safety before proceeding to these steps: • Choose an appropriate site and install the product on a level table where the stand is secure. • Install the monitor to have ready access to a power socket available. • Make sure that the power switch of this device is turned off. 7 4 (1) ...
-
Hitachi 28LD5000TA - page 13
13 ENGLISH ① Connect the power cord to this device. ➁ Connect the power cord plug to the power outlet. (The type of plug is different from this drawing for some countries.) Connect the power cord, after completing all other connections. ① ➁ INST ALLA TION INSTRUCTIONS (continued) Power Cord Connection • Use only the power cord provided. ? ...
-
Hitachi 28LD5000TA - page 14
14 OPERA TING INSTRUCTIONS T urning Power On and Off • To turn the monitor power ON, press the main power switch on the monitor main unit to ON, and then press the SUB POWER button or the ON/OFF or ON button on the remote control. • To turn the monitor power OFF, press the SUB POWER button or the ON/OFF or OFF button on the remote control, and ...
-
Hitachi 28LD5000TA - page 15
15 ENGLISH D / N A / B i + MENU OK FREE ZE ZOO M AV1 RGB1 RGB2 AV2 AV3 AV 4 2- 4- 12 I / II P+ P- + - DVD 123 456 78 0 9 OPERA TING INSTRUCTIONS (continued) Audio Mute The audio volume can be temporarily mute by pressing the MUTE button of the remote control. • When a button is pressed, the volume adjustment status guide (magenta) will be display ...
-
Hitachi 28LD5000TA - page 16
16 Size Switching Each time the ZOOM button of the remote control is pressed, the screen display area will change in sequence and the status will be displayed at the bottom of the screen. Normal Full Zoom1 Real Zoom3 Zoom2 ZOOM button A / B i + MENU OK FR EEZ E ZO O M 2- 4- 12 I / II P+ P- + - DVD Input Signal Screen Display The input signal status ...
-
Hitachi 28LD5000TA - page 17
17 ENGLISH D / N A / B i + MENU OK FR EEZ E ZO O M AV1 RGB1 RG B2 AV2 AV3 AV 4 2- 4- 12 I / II P+ P- + - DVD 123 456 78 0 9 Using the Menu Screen (On-screen display system) When the MENU button is pressed, the adjustment menu screen will be displayed; from there, PC signal adjustment and setting is possible by using the SELECT button, ADJUST button ...
-
Hitachi 28LD5000TA - page 18
18 PICTURE MENU Picture Audio Tim er Function Setup Language Select OK Set Picture Contrast : + 31 Brightness : – 31 Colour : 0 Hue : + 31 Picture Enhancement : Off Colour T emperature : Normal Colour T emp.Adjust Back Light Reset Reset Select Set Return OK Picture Contrast : + 31 Brightness : – 31 Colour : 0 Hue : + 31 Picture Enhancement : Of ...
-
Hitachi 28LD5000TA - page 19
19 ENGLISH Selected characters Setup hint Audio Mode Movie Music Speech Favourite Movie: This selects the audio suitable for Movie. Music: This selects the audio suitable for Music. Speech: This selects the audio suitable for News, Talk show etc. Favourite: This mode should be adjusted depending on user ’ s preference. Treble Suppresses treble. E ...
-
Hitachi 28LD5000TA - page 20
20 Picture Audio Tim er Function Setup Language Select OK Set Function Screen Saver Off Screen Wipe On 60Min. Black Side Panel Off Video Power Save Off Freeze Mode Split Default Zoom Panoramic Reset Reset Select Set Return OK P+ P- MENU FUNCTION MENU P+ P- Function Wide Standard Setting Fill Mode Display Off ID Number 1 Reset Reset Select Set Retur ...
-
Hitachi 28LD5000TA - page 21
21 ENGLISH SETUP MENU Picture Audio Time r Function Setup Language Select OK Set Setup Auto Adjust Adjust Horizontal Position 0 Vertical Position + 31 Horizontal Clock – 20 Clock Phase 10 Reset Reset Select Return Exit Setup Input Level 0.7V Frequency Display Off WVGA Type Off WXGA Mode Of f Vertical Filter On Frequency Mode Movie RGB1 DVI-PC RGB ...
-
Hitachi 28LD5000TA - page 22
22 LANGUAGE MENU Picture Audio Tim er Function Setup Language Select OK Set Language English Fran ç ais Deutsch Espa ñ ol Italiano Norsk Svenska Select Return Exit OK P+ P- MENU Select a language by ▼ ▲ SELECT buttons and press the OK button. OTHER FEA TURES Automatic Store Approximately 1 sec. after adjustment is completed, the adjustments w ...
-
Hitachi 28LD5000TA - page 23
23 ENGLISH Signal Check Status Display Action The input signal is switched or when the RECALL button is pressed. A guide is displayed for the input terminal and the horizontal and vertical sync frequency. When the sync signal is no longer detected. • A guide displays No Sync. Signal, and Power Save (for approx. 5 sec.) • When the condition cont ...
-
Hitachi 28LD5000TA - page 24
24 NOTES About screen defects • High precision technology is used in the making of LCD panels but there may be dark spots (points that do not illuminate) and bright spots (points that are too bright) in some cases. These do not indicate a malfunction. About residual images • In some cases, residual images may remain after the short-term display ...
-
Hitachi 28LD5000TA - page 25
25 ENGLISH Symptoms That Seemingly Appear to be Failures Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. TROUBLESHOOTING Customer servicing can be hazardous. W ARNING Symptom Point to check See page • No picture with the power-indicating lamp off. • Check the way the p ...
-
Hitachi 28LD5000TA - page 26
26 20 ...
-
Hitachi 28LD5000TA - page 27
27 ENGLISH Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the adjustments suggested below. (only for RGB2) Actions to Correct Abnormal Displays TROUBLESHOOTING (continued) Figure 1 ...
-
Hitachi 28LD5000TA - page 28
28 Monitor rear panel Speaker (R) Speaker (L) Power cord Video Unit Function Use if the video equipment has an S video input terminal T o RGB, video and audio input terminals T o SCART terminal T o S video output terminal T o audio output terminals T o SCART terminals T o component output terminals T o component input terminals T o composite input ...
-
Hitachi 28LD5000TA - page 29
29 ENGLISH OPERA TING INSTRUCTIONS Input Switching OK FREE ZE ZOO M AV1 RGB1 RGB2 AV2 AV3 AV 4 P+ P- + - DVD 123 456 78 0 9 TV A V1 A V2 A V3 RGB2 RGB1 A V4 INPUT SELECT button RGB/VIDEO buttons Each time the ZOOM button of the remote control is pressed, the screen display size will change in sequence and the status will be displayed at the bottom ...
-
Hitachi 28LD5000TA - page 30
30 ATTENTION Using a wide-screen monitor • This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain software, such as a TV program, the image would appear different from the original. Take this into consideration when making screen mode choices. • Use of this monitor in its enlarged display mo ...
-
Hitachi 28LD5000TA - page 31
31 ENGLISH OPERA TING INSTRUCTIONS (continued) PinP button D / N A / B i + MENU OK FR EEZ E ZO O M 2- 4- 12 I / II P+ P- + - DVD 123 456 78 0 9 RECALL button The input signal status can be displayed on the screen by pressing the RECALL button of the remote control. • The display will go out in approximately 6 seconds. AV 1 Composite - - - - Min. ...
-
Hitachi 28LD5000TA - page 32
32 Picture Audio Time r Function Setup Language Select OK Set Picture Picture Mode Dynamic Contrast +31 Brightness -31 Colour 0 Sharpness +15 Hue 0 Colour T emperature Normal Contrast Mode Normal Back Light Reset Reset Select Set Return OK OK MENU Picture Dynamic YNR Off CNR Off Film Mode On P AL Comb Filter On L TI Off CTI Off Black Enhancement Of ...
-
Hitachi 28LD5000TA - page 33
33 ENGLISH OPERA TING INSTRUCTIONS (continued) PICTURE MENU (continued) ▼ ▼ ...
-
Hitachi 28LD5000TA - page 34
34 Selected characters Setup hint Colour Management Off On Turn On when the original balance of each colour is required to adjust depending on the user ’ s preference. Magenta Magenta is weakened. Magenta is strengthened. This adjusts listed colours individually to make them either deeper or more pure. These settings are independently stored in e ...
-
Hitachi 28LD5000TA - page 35
35 ENGLISH OPERA TING INSTRUCTIONS (continued) SETUP MENU Picture Audio Time r Function Setup Language Select OK Set Setup System System 1 Colour System Video Input Audio Input Scart Output Monitor RGB1 DVI-STB RGB2 Component HDTV Select Set Return OK Setup System System 1 Colour System Video Input Audio Input Scart Output Monitor RGB1 DVI-STB RGB2 ...
-
Hitachi 28LD5000TA - page 36
36 Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below. OTHER FEA TURES Automatic Store • The previously recorded items will be lost. ▼ ▼ ...
-
Hitachi 28LD5000TA - page 37
37 ENGLISH Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. Customer servicing can be hazardous. W ARNING Symptom Point to check See page • The screen becomes dark and the images cannot be seen during VCR special playback (fast forward, rewind). • This sometimes occurs ...
-
Hitachi 28LD5000TA - page 38
38 D / N A / B i + MENU OK FREEZE ZOOM AV1 RGB1 RGB2 AV2 A V3 AV4 2-4-12 I / II P+ P- + - DVD 123 456 78 0 9 SUBTITLE button TV button TEXT button COLOUR buttons (RED, GREEN, YELLOW, BLUE) TEXT / TV + TEXT button TV / TEXT button MODE button [Buttons for TELETEXT Mode] PAGE UP / DOWN button REVEAL button HOLD button INDEX button SUB PAGE buttons CA ...
-
Hitachi 28LD5000TA - page 39
39 ENGLISH Monitor rear panel Speaker (R) Speaker (L) Power cord 20 18 16 14 12 10 8 6 4 2 21 19 17 15 13 11 9 7 5 31 antenna Make sure that the power switch of the monitor is turned off. INST ALLA TION INSTRUCTIONS Connecting Antenna Precautions when connecting the antenna • Please use a coaxial cable which is free from interference to connect t ...
-
Hitachi 28LD5000TA - page 40
40 OPERA TING INSTRUCTIONS D / N A / B i + MENU OK FREEZE ZOOM AV1 RGB1 RGB2 AV2 AV3 AV4 2-4-12 I / II P+ P- + - DVD 123 456 78 0 9 POWER ON/OFF button • Input can be switched by pressing the AV1, AV2, AV3, AV4, RGB1 or RGB2 buttons of the remote control. And the way to return to a TV channel is as follows: • Pressing INPUT SELECT button at RGB ...
-
Hitachi 28LD5000TA - page 41
41 ENGLISH OPERA TING INSTRUCTIONS (continued) RECALL button MULTI PICTURE button SELECT buttons Activating the Split mode from the TV screen Pressing the MULTI PICTURE button one time will display 2 pictures. • The speaker icon can be shifted left and right by pressing the A/B button; the audio will be output from the side on which the speaker i ...
-
Hitachi 28LD5000TA - page 42
42 Input Signal Screen Display The TV channel status can be displayed on the screen by pressing the RECALL button of the remote control. • The display will go out in approximately 6 seconds. 1 ABCDE - - - - Min. - - - - : - - - - OFF ON I TV position Name Sound mode Sound system Off-timer On-timer TV 4 Pictures 2 Pictures (Split) Main Sub Sub 1 S ...
-
Hitachi 28LD5000TA - page 43
43 ENGLISH OPERA TING INSTRUCTIONS (continued) D / N A / B i + MENU OK FREEZE ZOOM AV1 RGB1 RGB2 AV2 A V3 AV4 2-4-12 I / II P+ P- + - DVD 123 456 78 0 9 When the FREEZE button on the remote control is pressed, the screen transfers into the freeze mode. • There are two types of freezing screen mode, Split and Strobe. These are possible to select a ...
-
Hitachi 28LD5000TA - page 44
44 SETUP MENU Picture Audio Time r Function Setup Language Select OK Set Setup Auto Tuning Manual Tuning Fine Tuning Sort Auto Of f Off Select Set Return OK OK P+ P- M ENU Setup Auto Tuning Country Austria Belgium Croatia Czech Republic Denmark Finland France Germany Search Select Set Return OK Setup Auto Tuning Country Greece Hungary Iceland Irela ...
-
Hitachi 28LD5000TA - page 45
45 ENGLISH OPERA TING INSTRUCTIONS (continued) SETUP MENU (continued) [During VIDEO signal input] 1 item is added to the Menu shown in the page . 35 Selected characters Setup hint Scart Output TV Monitor TV:AV4 (Scart) output will be fixed as TV signal output. Monitor:AV4 (Scart) output can view the image as on the main unit. But it is possible to ...
-
Hitachi 28LD5000TA - page 46
46 OTHER FUNCTIONS A2 / NICAM / Sound Multiplex • The CH I / II button is only useful for NICAM and sound multiplex signals. Otherwise pressing this button will have no effect. BILINGUAL / DUAL sound broadcast When bilingual program is received, sound mode display appears in yellow as shown on right. Press the CH I / II button to select the sound ...
-
Hitachi 28LD5000TA - page 47
47 ENGLISH OPERA TING INSTRUCTIONS (continued) DVD Player Selection • You can use this remote control to operate the selected brand of DVD player by pressing the following buttons on the remote control simultaneously. Example To operate HITACHI DVD player, press and hold the RECALL button, followed by the button. 1 NOTE • Not all models of the ...
-
Hitachi 28LD5000TA - page 48
48 Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. Customer servicing can be hazardous. W ARNING TROUBLESHOOTING Symptoms That Seemingly Appear to be Failures Symptom Possible reason Remedy (1) Connection of antenna cable to the TV is poor. (2) Corroded or poor antenna con ...
-
Hitachi 28LD5000TA - page 49
49 ENGLISH PRODUCT SPECIFICA TIONS • The monitor takes at least 30 minutes to attain the status of optimal picture quality. ...
-
Hitachi 28LD5000TA - page 50
50 Signal Input 1 2 3 4 S-input connector pin specifications Pin Input signal 1 Y 2 Y-GND 3 C 4 C-GND Frame GND 20 18 16 14 12 10 8 6 4 2 21 19 17 15 13 11 9 7 5 31 Scart connector pin specifications Pin Signal Pin Signal 1 AUDIO OUT (RIGHT) 12 Not Used 2 AUDIO IN (RIGHT) 13 RGB-R GND 3 AUDIO OUT (LEFT/MONO) 14 GND 4 AUDIO GND 15 RGB-R / S.VHS CHRO ...
-
Hitachi 28LD5000TA - page 51
51 ENGLISH Recommended Signal List PRODUCT SPECIFICA TIONS (continued) ...
-
Hitachi 28LD5000TA - page 52
52 No. Signal mode Horizontal frequency (kHz) Dot clock frequency (MHz) Remarks Signal Name Resolution Vertical frequency (Hz) 1 NTSC4.43 NTSC3.58 525 59.94 15.73 — 2 PAL SECAM 625 50.00 15.63 — With Composite Input(AV1~AV4 input) and S-video Input (AV3 input). No. Signal mode Horizontal frequency (kHz) Dot clock frequency (MHz) Remarks Signal ...
-
Hitachi 28LD5000TA - page 53
53 ENGLISH Thank Y ou for purchasing this Hitachi T elevision. In the unlikely event that this product should develop a fault, we undertake to repair or replace any part of the product which fails due to a manufacturing defect within 12 months of the date of purchase provided that ... 1. the product has been installed and used only in accordance wi ...
¿Tienes una pregunta acerca de Hitachi 28LD5000TA?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Hitachi 28LD5000TA, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Hitachi 28LD5000TA probablemente compartirá una forma de solucionarlo.