-
Cisco Systems 5505 - page 1
4-1 ASA 5505 Getting Started Guide 78-18003-02 CH A P T E R 4 Installing the ASA 5505 This chapter describes ho w to install the ASA 5505 ad aptiv e security appliance. This chapte r includes the follo wing sections : • V erifying the P ackage Contents, page 4-1 • PoE Ports and D evices, page 4-3 • Installing the Chassis, page 4-3 • Connect ...
-
Cisco Systems 5505 - page 2
Chapter 4 Installing the ASA 5505 Verifying the Package Contents 4-2 ASA 5505 Getting Started Guide 78-18003-02 Figure 4-1 Contents of A SA 5505 Pac kage Cisco ASA 5505 Getting Started Guide Regulatory Compliance and Safety Information Cisco ASA 5505 Documentation Cable (US shown) P ower supply adapter Blue console cable Y ello w Ether net cable Ci ...
-
Cisco Systems 5505 - page 3
4-3 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 PoE Ports and Devices PoE Ports and Devices On the ASA 5505, switch ports Ethernet 0/6 and Ethernet 0/7 support PoE de vices that are compliant with the IEEE 802.3af st andard, such as IP phones and wireless access points. If you install a non-PoE de vice or do not con ...
-
Cisco Systems 5505 - page 4
Chapter 4 Installing the ASA 5505 Connecting to Netw ork Interfaces 4-4 ASA 5505 Getting Started Guide 78-18003-02 b. Use one of the yellow Ethernet cab les to connect th e device to a cable/DSL/ISDN modem. Note By default, swit ch port 0 is the outside p ort. Step 3 Connect your netw ork devices with an Et hernet cable to one of the remaining sev ...
-
Cisco Systems 5505 - page 5
4-5 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 Powering on the ASA 5505 Figure 4-2 Connecting to an Ether net Interface Step 3 Connect the other end of the Et hernet cable to a device, such as a router , des ktop computer , or printer . Powering on the ASA 5505 T o po wer on the ASA 5505, perform the fo llowing ste ...
-
Cisco Systems 5505 - page 6
Chapter 4 Installing the ASA 5505 Setting Up a PC for System Administration 4-6 ASA 5505 Getting Started Guide 78-18003-02 Note The ASA 5505 does not have a po wer switch. Completing Step 3 powers on the device. Step 4 Check the po wer LED; if it is solid green, then the device is po wered on. For more information, see the “Front Panel Components ...
-
Cisco Systems 5505 - page 7
4-7 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 Optional Procedures When you connect other de vices to any of the i nside ports, make sure that they do not hav e the same IP address. Note The MGMT interface of the adaptive security appliance is assigned 192.168.1.1 b y default, so this address is una vailable. Step ...
-
Cisco Systems 5505 - page 8
Chapter 4 Installing the ASA 5505 Optional Procedures 4-8 ASA 5505 Getting Started Guide 78-18003-02 Figure 4-3 Connecting to the Console T o connect a console for local, command-l ine administrative access, perform the follo wing steps: Step 1 Plug one end of the P C t er mi na l a da pt er into a standard 9-pin PC serial port on your PC. Step 2 P ...
-
Cisco Systems 5505 - page 9
4-9 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 Ports and LEDs T o install a cab le lock, perform the follo wing steps: Step 1 Follo w the directions from th e manufacturer for attaching the oth er end of the cable for securing the adap tive security appliance. Step 2 Attach the cable lock to th e lock slot on the b ...
-
Cisco Systems 5505 - page 10
Chapter 4 Installing the ASA 5505 Ports and LEDs 4-10 ASA 5505 Getting Started Guide 78-18003-02 Figure 4-4 illu strates the front panel of the ASA 5505. Figur e 4-4 ASA 5505 Fr ont P anel 153382 Cisco ASA 5505 series Adaptive Security Appliance 0 00000000 LINK/ACT Power Status Active VPN SSC 3 100 MBPS 4 5 6 7 1 2 Port / LED Color State Descriptio ...
-
Cisco Systems 5505 - page 11
4-11 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 Ports and LEDs * If the LINK/ACT LED does not light up, the link could be down if there is a duplex mismatch. You can fix the problem by changing the settings either on the ASA 5505 or on th e other end. If auto-negotiation is disabled (it is enabled by default), you ...
-
Cisco Systems 5505 - page 12
Chapter 4 Installing the ASA 5505 Ports and LEDs 4-12 ASA 5505 Getting Started Guide 78-18003-02 Rear Panel Components Figure 4-5 illustrates the b ack panel of the ASA 5505. Figure 4-5 ASA 5505 Rear P anel 153383 Security Services Card Slot 1 2 Console RESET power 48 VDC 7 POWER over ETHERNET 6 543 2 10 2 3 6 5 8 7 1 4 Port or LED Purpose 1 Pow er ...
-
Cisco Systems 5505 - page 13
4-13 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 What to Do Next What to Do Next Continue with Chapter 5, “Confi guring the Ad aptiv e Se curity Appliance. ” 6 2 USB ports v2.0 ports Reserved for future use. 7 Ethernet switch ports 0 –7 Layer 2 switch ports t hat provide fle xible VLAN configuratio n. Note Eth ...
-
Cisco Systems 5505 - page 14
Chapter 4 Installing the ASA 5505 What to Do Next 4-14 ASA 5505 Getting Started Guide 78-18003-02 ...
¿Tienes una pregunta acerca de Cisco Systems 5505?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Cisco Systems 5505, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Cisco Systems 5505 probablemente compartirá una forma de solucionarlo.