Español dropdown-ico

Manual de instrucciones Black Box LRB500A

33 de páginas 0.25 mb
Descargar

Pasar a la página of 33

Summary
  • Black Box LRB500A - page 1

    CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500 ) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation , 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com AUGUST 20 ...

  • Black Box LRB500A - page 2

    1 FCC AND IC RFI ST A TEMENTS FEDERAL COMMUNICA TIONS COMMISSION and INDUSTR Y CANADA RADIO FREQUENCY INTERFERENCE ST A TEMENTS Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection aga ...

  • Black Box LRB500A - page 3

    2 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY ST A TEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas pa ...

  • Black Box LRB500A - page 4

    3 NOM ST A TEMENT 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde s ...

  • Black Box LRB500A - page 5

    4 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE TRADEMARKS USED IN THIS MANUAL Adobe ® , Adobe Acrobat ® , and Adobe Acrobat Reader ® are registered trademarks of Adobe Systems, Incorporated. Intel ® is a registered trademark of Intel Corporation. UL ® is a registered trademark of Underwriters Laboratories Incorporated. VT100 ...

  • Black Box LRB500A - page 6

    5 CONTENTS Contents Chapter Page 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.2 Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Black Box LRB500A - page 7

    6 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE 1. Introduction 1.1 Description The Net Access Broadband Router w/4-Port Switch connects a cable or DSL modem to an Ethernet LAN, providing high-speed broadband access to the Internet for up to 253 LAN clients using only one IP account. The Router features an integrated 4-port 10/100 ...

  • Black Box LRB500A - page 8

    7 CHAPTER 1: Introduction 1.2.3 S AVE OR P RINT THE U SER G UIDE Once the User Guide is displayed on-screen using Adobe Acrobat Reader, you can save the .pdf file to your system or print a copy. ...

  • Black Box LRB500A - page 9

    8 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE 2. Hardware Installation 2.1 Safety W arnings 1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in a wet location unless the jack is specifically designed for wet locations. 3. This product is to be used with UL and cUL listed computers. 4. ...

  • Black Box LRB500A - page 10

    9 CHAPTER 2: Hardware Installation 2.3 Cabling Y our Router Proper cabling requires making the appropriate connections to PCs, a cable or DSL modem, an analog modem or ISDN TA (optional), AC power, and the router. Because this device also provides DHCP server functions, remote access, and routing and firewall protection, after your device is proper ...

  • Black Box LRB500A - page 11

    10 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE 5. Connect a network cable from the DSL or cable modem to the WAN port. 6. Connect the provided power-supply cable to the 5-VDC power port on the back of the router. Plug the power supply into an AC power outlet as shown. 7. Power on your DSL or cable modem. 8. If you are using an a ...

  • Black Box LRB500A - page 12

    11 CHAPTER 3: Software Installation and Configuration 3. Software Installation and Configuration Before beginning the installation process, make sure that your system meets all hardware and software requirements: • Intel ® 486 or higher processor. • 10/100BASE-T cable to connect the Router to the network. • One DSL or cable modem. • A netw ...

  • Black Box LRB500A - page 13

    12 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE 3.1.3 B ROADBAND M ONITOR Broadband Monitor is a multi-purpose utility designed to let you know the status of your Router connection. The monitor offers the ability to point and click on an event to access context-sensitive troubleshooting procedures. Refer to the User Guide for mor ...

  • Black Box LRB500A - page 14

    13 CHAPTER 3: Software Installation and Configuration Figure 3-1. Setup Wizard dialog box. Click OK . 5. The Setup Wizard: Device List dialog box appears. The Setup Wizard automatically checks your network for available network devices and displays them on the screen (see Figure 3-2). ...

  • Black Box LRB500A - page 15

    14 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE Figure 3-2. Setup Wizard: Device List dialog box. Select the device you want to configure from the Device Name list. Record the values presented in the Device Information panel for later reference. Device IP Address ______________________ Device MAC Address ____________________ Devi ...

  • Black Box LRB500A - page 16

    15 CHAPTER 3: Software Installation and Configuration 6. The Setup Wizard: Device IP Address dialog box appears (see Figure 3-3). Figure 3-3. Setup Wizard: Device IP Address dialog box. Enter your local internal network’s IP address for this device. The Setup Wizard will automatically detect the first three octets of your local IP address. You mu ...

  • Black Box LRB500A - page 17

    16 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE 7. The Select Function dialog box appears (see Figure 3-4). Figure 3-4. Select Function dialog box. Select the function of the WAN Ethernet port by selecting IP Routing (NAT Enabled) or IP Routing (NAT Disabled) . If you are using NAT Enabled , you may also select Enable PPPoE . • ...

  • Black Box LRB500A - page 18

    17 CHAPTER 3: Software Installation and Configuration 8. The External IP Assignment dialog box appears (see Figure 3-5). Figure 3-5. Exter nal IP Assignment dialog box. Enter the WAN Ethernet IP address information provided by your ISP or other external network administrator. • In the External IP Address box, enter the ISP or remote system’s IP ...

  • Black Box LRB500A - page 19

    18 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE 9. The Asynchronous Port Function dialog box appears (see Figure 3-6). Select from Remote Access , IP Routing (NAT Enabled) , or IP Routing (NAT Disabled) . Figure 3-6. Asynchronous Port Function dialog box. • Select Remote Access to allow remote users to dial-in to the network to ...

  • Black Box LRB500A - page 20

    19 CHAPTER 3: Software Installation and Configuration 1.) Remote Access You must define the location of your remote user account database by selecting Use Local Client List or Use RADIUS Server . Follow the instructions for the user database your system will use. NOTE The Local Client List allows you to add a maximum of 64 users. a.) Use Local Clie ...

  • Black Box LRB500A - page 21

    20 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE Callback Type: Select one of the following three callback options for each remote client: • No Callback: Select this option to allow the remote user to immediately connect to the network after being authenticated. No Callback is the default setting. • Fixed Callback: This option ...

  • Black Box LRB500A - page 22

    21 CHAPTER 3: Software Installation and Configuration b.) Use RADIUS Server Select this option if you would like your remote clients to be authenticated on a RADIUS server. You must enter the following RADIUS Server Settings: Figure 3-8. Enter RADIUS Ser ver Settings. • RADIUS Access Server IP Address: Enter the IP address of the RADIUS Access Se ...

  • Black Box LRB500A - page 23

    22 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE 2.) IP Routing (NAT Enabled) or 3.) IP Routing (NAT Disabled) If you select IP Routing for the asynchronous port, the Setup Wizard: IP Routing dialog box appears (see Figure 3-9). Figure 3-9. Setup Wizard: IP Routing dialog box. Enter the information required to dial up and log into ...

  • Black Box LRB500A - page 24

    23 CHAPTER 3: Software Installation and Configuration Click Next >>. 10. The Setup Wizard: DNS IP Address dialog box appears (see Figure 3-10). Figure 3-10. Setup Wizard: DNS IP Address dialog box. Enter your ISP’s DNS Server IP Address . If you are not sure of the IP address, contact your ISP. Refer to the Glossary in the User Guide for mo ...

  • Black Box LRB500A - page 25

    24 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE 11. The Setup Wizard: Modem Settings dialog box appears (see Figure 3-11). Figure 3-11. Setup Wizard: Modem Settings dialog box. The final step in configuring your Router for basic operations is to enter the model and DTE baud rate of the modem you are using. This is an important se ...

  • Black Box LRB500A - page 26

    25 CHAPTER 3: Software Installation and Configuration 13. The Modem Initial Command dialog box appears (see Figure 3-12). Figure 3-12. Modem Initial Command dialog box. Select your modem manufacturer and model and click OK. NOTE This setting configures the initial string of the asynchronous port on the Router so that it will know how to communicate ...

  • Black Box LRB500A - page 27

    26 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE NOTE You may need to set a lower baud rate since the theoretical maximum connection speed may not be attainable due to variations in quality of phone line and ISP connection. Click Next >> to complete the basic configuration. 15. The Check List dialog box will appear. It summa ...

  • Black Box LRB500A - page 28

    27 CHAPTER 3: Software Installation and Configuration 16. The Note dialog box appears (see Figure 3-14). It indicates that you have completed the Setup Wizard . Figure 3-14. Note dialog box. Read the “IMPORTANT!” information contained in the dialog box. Click Run Monitor (recommended), Run Manager , or Exit . 3.3 T esting Y our Connection When ...

  • Black Box LRB500A - page 29

    28 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE NOTE If a problem occurs while testing your connection, or you need to configure advanced options such as filtering, DHCP or routing, use Broadband Manager by selecting Programs, then Broadband Manager, then Broadband Manager. 3.4 Using T elnet to Configure Y our Router Telnet is a ...

  • Black Box LRB500A - page 30

    29 CHAPTER 3: Software Installation and Configuration 3. The Router Telnet Server Menu appears (see Figure 3-16). Figure 3-16. T elnet Ser ver Menu screen. To use the menu, select the letter corresponding to the value you’d like to change. Depending on the value you are changing, you are presented with either an open field into which you may type ...

  • Black Box LRB500A - page 31

    30 NET ACCESS BROADBAND ROUTER W/4-POR T SWITCH QUICK ST ART GUIDE 2. Select WAN Ethernet Settings to select the function of the WAN port as Internet Access or LAN-to-LAN Access . Complete the External IP Port Address , External Port IP Netmask , Gateway IP Address , and DNS IP Address fields using the IP addresses provided by your ISP or remote ne ...

  • Black Box LRB500A - page 32

    31 CHAPTER 3: Software Installation and Configuration NOTE IP Mapping is available only when NAT is enabled. 7. Select Routing Table and use the menu options to enter the necessary information to route IP packets from one network to another. See the User Guide for more information about Routing. 8. You may define packet filtering options using the ...

  • Black Box LRB500A - page 33

    1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746 © Copyright 2001. Black Box Corporation. All rights reserved. ...

Fabricante Black Box Categoría Network Router

Los documentos del dispositivo Black Box LRB500A que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Black Box
- manuales de instrucciones LRB500A
- hojas de producto Black Box
- folletos informativos
- o etiquetas energéticas Black Box LRB500A
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Black Box LRB500A.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Black Box LRB500A, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Black Box LRB500A. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Black Box LRB500A.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Black Box LRB500A, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Black Box LRB500A. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Black Box LRB500A.

El manual de instrucciones completo de Black Box debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Black Box LRB500A - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Black Box LRB500A, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Black Box LRB500A que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Black Box LRB500A - que deben facilitarnos los primeros pasos durante el uso de Black Box LRB500A
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Black Box LRB500A
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Black Box LRB500A en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Black Box LRB500A?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Black Box LRB500A, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Black Box LRB500A probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)