-
Philips CarStudio CE139DR - page 1
www .philips.com/welcome User man ual Alwa ys there to help y ou Register your pr oduct and get suppor t at CE139DR Ques tion? Cont ac t Philips ...
-
Philips CarStudio CE139DR - page 2
1 EN Contents 1 Safety 2 2 Y our car audio system 3 Introduction 3 What's in the box 3 Over view of the system 4 3 Install the car audio system 6 Connect wires 7 Mount into the dashboard 8 Attach the front panel 9 4 Get started 10 For the r st time use 10 Set the time format 10 Set the clock 11 Select a source 11 Select a listening zone 11 ...
-
Philips CarStudio CE139DR - page 3
2 EN 1 Safety Read and under stand all instr uctions before you use this device . If damage is caused by failure to follow instructions, the warr anty does not apply . • Modication of the product could result in hazardous radiation of EMC or other unsafe operation. • The device is designed for negative ground (ear th) 12 V DC operation only ...
-
Philips CarStudio CE139DR - page 4
3 EN 2 Y our car audio system Congratulations on your purchase , and welcome to Philips! T o fully benet from the suppor t that Philips offer s, register y our product at www .philips.com/welcome. Intr oduction With this system, you can: • enjoy audio from a USB storage device , SD/SDHC card, iP od/iPhone , and exter nal play er , • charge y ...
-
Philips CarStudio CE139DR - page 5
4 EN Ov er view of the system a • Unlock the front panel. b • For .wma and .mp3 tracks, press to select the previous folder . • In D AB mode , press to access the D AB menu. • Press and hold to access the system menu. • Press to select a tuner band. ab cd e ts rq po nm lk ji hf g uv c • Return to the previous menu. • For iP od/iPhone ...
-
Philips CarStudio CE139DR - page 6
5 EN f AUDIO-IN • Connect to the audio output socket (usually the headphone socket) of an external device . g • Star t, pause, or resume the play of tracks. • In FM/MW radio mode , press to select the preset radio station of No. 6. • In FM/MW radio mode , press and hold to store the current r adio station at channel No. 6. h • In FM/MW ra ...
-
Philips CarStudio CE139DR - page 7
6 EN q • For .wma and .mp3 tracks on a stor age device , press to select the next folder . • In D AB mode , press and hold to access the list of radio stations. • In a mode other than D AB mode , press and hold to activate the selection of listening zones. • Press to select a tuner band. r / • T une to a radio station. • Press to skip t ...
-
Philips CarStudio CE139DR - page 8
7 EN Connect wir es Note • Make sure that all loose leads are insulated with electrical tape . • Consult a professional to connect wires as instructed below . 1 Check the car's wiring carefully and connect them to the the supplied ISO male connector s. ISO male connector s Connect to 1 Green str ip, black- edged green strip Rear left speak ...
-
Philips CarStudio CE139DR - page 9
8 EN Connect the D AB radio r eceiver Note • The D AB radio receiver and DAB radio antenna are not bundled. Consult your local retailer f or purchase . • Make sure that no lead other than the D AB r adio antenna contacts the antenna connector of the D AB radio receiver . • Risk of injur y: Never install the DAB radio receiver and its accessor ...
-
Philips CarStudio CE139DR - page 10
9 EN 2 Remov e the mounting sleeve with the supplied disassembly tools. 3 Install the sleeve into the dashboard and bend the tabs outward to x the sleeve. 4 Slide the unit into the sleeve until y ou hear a "click". 183 mm 53.5 mm 5 Attach the trim plate . 6 Reconnect the negative terminal of the car batter y . Attach the fr ont panel 1 ...
-
Philips CarStudio CE139DR - page 11
10 EN Detach the fr ont panel Note • Before you inser t an SD/SDHC card or reset the system, detach the front panel. • Before you detach the front panel, make sure that the system is turned off. 1 Press to release the front panel. 2 Pull the front panel outwards to remov e it. 4 Get star ted For the rst time use 1 Press to turn on the system ...
-
Philips CarStudio CE139DR - page 12
11 EN Set the clock 1 Press and hold to access the system menu. 2 Press / repeatedly until [CLOCK] is display ed with time digits blinking. 3 Rotate anti-clockwise to set the hour . 4 Rotate clockwise to set the minute. Tip • The system can automatically synchronize its clock with an RDS station that transmits time signals (see ‘Synchronize the ...
-
Philips CarStudio CE139DR - page 13
12 EN 5 Listen to FM/ MW radio stations Switch to FM/MW radio mode 1 Press AS / SOURCE repeatedly to switch the source to [RADIO] . 2 Press / repeatedly to select a band: FM1 , FM2 , FM3 , MW1 , or MW2 . Select a tuner r egion Y ou can select a r adio region that matches your location. 1 Press and hold to access the system menu. 2 Press / repeatedl ...
-
Philips CarStudio CE139DR - page 14
13 EN Store radio stations automaticall y 1 Press or repeatedly to select a band. 2 Press and hold AS / SOURCE until [ST ORE---] is display ed. » After the search is complete , the r st stored r adio station is broadcast automatically . • T o select a stored r adio station, press , , , , , or . Store radio stations man ually 1 Press BAND , , ...
-
Philips CarStudio CE139DR - page 15
14 EN Item Program type Description 18 CHILDREN Children’s programs 19 SOCIAL Social Affair s 20 RELIGION Religion 21 PHONE IN Phone In 22 TRA VEL Tr a v el 23 LEISURE Leisure 24 JAZZ Jazz Music 25 COUNTR Y Countr y Music 26 NA TION M National Music 27 OLDIES Oldies Music 28 FOLK M Folk Music 29 DOCUMENT Documentar y 30 TEST Alarm T est 31 ALARM ...
-
Philips CarStudio CE139DR - page 16
15 EN 6 Listen to D AB radio stations Note • Make sure that the D AB r adio receiver is securely connected. • For optimal reception, securely connect a D AB r adio antenna to the D AB r adio receiver and extend it. • Check with local retailer or go to www .W or ldDAB.org for applicable D AB radio frequencies in your area. Switch to D AB mode ...
-
Philips CarStudio CE139DR - page 17
16 EN • T o tune to a progr ammed r adio station, press its cor responding numeric button , , , , , or . Pr ogram stations manually 1 T une to the target detected station (see ‘T une to a detected station’ on page 15). 2 Press / repeatedly to select a band. 3 Press and hold a numeric button , , , , , or to assign a sequence number to the stat ...
-
Philips CarStudio CE139DR - page 18
17 EN 3 Rotate to select an option, and then press to conrm. • [ANTENNA OFF] : Disable the D AB reception. • [ANTENNA 12V] : Enable the D AB reception. Reset the D AB tuner 1 Press and hold to access the system menu. » [D AB SC AN] is display ed. 2 Press / repeatedly until [D AB RESET] is display ed. • T o clear the list of detected and p ...
-
Philips CarStudio CE139DR - page 19
18 EN 2 Press AS / SOURCE repeatedly to switch the source . • [FR ONT USB] : For a USB stor age device that is connected to the USB socket on the front panel • [REAR USB] : For a USB stor age device that is connected to the USB connector on the rear panel • [SD/SDHC] : For an SD/SDHC card that is inser ted into the slot 3 If the play does not ...
-
Philips CarStudio CE139DR - page 20
19 EN 8 Pla y fr om an iP od/iPhone Note • During play , no audio signals are transferred through the headphone socket of your iP od/iPhone. Compatible iP od/iPhone models This car audio system suppor ts the following iP od and iPhone models. • iPhone 4S, iPhone 4, iPhone 3GS, and iPhone 3G • iP od touch (2nd, 3rd, and 4th gener ations) • i ...
-
Philips CarStudio CE139DR - page 21
20 EN Sear ch for a track After accessing the iP od/iPhone menu, you can select a specic track quickly . 1 Press to access the iP od/iPhone menu. » [PLA YLIST] scrolls. 2 Rotate to select a categor y . 3 Press to access the list of tracks under the categor y . » The le name of the r st tr ack scrolls. 4 Rotate to select a track. » The ? ...
-
Philips CarStudio CE139DR - page 22
21 EN 10 Adjust sound The following operations are applicable to all suppor ted media. Button Function Rotate to increase or decrease the volume lev el. Press to mute the speakers or release the speaker s from mute status. Press to enable or disab le the MAX Sound feature. Press and hold to enable or disab le the Dynamic Bass Boost (DBB) effect. Pr ...
-
Philips CarStudio CE139DR - page 23
22 EN Note • If the fuse gets damaged immediately after it is replaced, an internal malfunction may occur . In such case, consult your Philips retailer . Upgrade the rmwar e Note • P ower supply must not be interrupted dur ing the upgrade . • When the rmware upgr ade succeeds, all settings are restored to the factor y default status. Re ...
-
Philips CarStudio CE139DR - page 24
23 EN 12 Pr oduct information Note • Specications are subject to change without prior notice. General P ower suppl y 12 V DC (11 V - 16 V), negative ground Fuse 15 A Suitable speaker impedance 4 - 8 Maximum po wer output 50 W x 4 channels Continuous pow er output 22 W x 4 RMS (4 10% T .H.D .) Pre-Amp output voltage 2.0 V Aux-in level 500 mV Di ...
-
Philips CarStudio CE139DR - page 25
24 EN 13 T r oubleshooting W arning • Never remov e the casing of this product. T o keep the war ranty valid, never tr y to repair the product yourself. If you encounter prob lems when using this product, check the following points before requesting ser vice . If the problem remains unsolved, go to the Philips W eb page (www . philips.com/suppor ...
-
Philips CarStudio CE139DR - page 26
25 14 Notice Any changes or modications made to this device that are not expressly appro ved by Philips Consumer Lifestyle ma y void the user’ s authority to oper ate the equipment. Car e of the envir onment Y our product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crosse ...
-
Philips CarStudio CE139DR - page 27
Specifications are subject to change without notice © 2013 K oninklijke Philips Electr onics N.V . All rights reserved. CE139DR_05_UM_V1.0 ...
¿Tienes una pregunta acerca de Philips CarStudio CE139DR?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Philips CarStudio CE139DR, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Philips CarStudio CE139DR probablemente compartirá una forma de solucionarlo.