Español dropdown-ico

Manual de instrucciones JVC GM X50U

128 de páginas 5.45 mb
Descargar

Pasar a la página of 128

Summary
  • JVC GM X50U - page 1

    INSTR UCTIONS GM-X50U For Customer Use: Enter below the Model No. and the Serial No. which is located on the rear panel of the cabinet. Retain this information for future reference. Model No. Serial No. MENU INPUT PLASMA DISPLA Y MONIT OR LCT1601-001A Cover_GM_X50[US].p65 04.1.27, 8:38 AM 3 ...

  • JVC GM X50U - page 2

    1 INSTR UCTIONS Model GM-X50U Thank you f or purchasing this JVC Monitor . Before using the monitor , read this manual carefully so that you kno w how to use the Monitor correctly . Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. K eep this manual where the user can see ...

  • JVC GM X50U - page 3

    2 Safety Precautions FCC NO TICE CA UTION: Changes or modifications not appro ved b y JVC could void the user’ s authority to operate the equipment. NO TE: This equipment has been tested and f ound to comply with the limits f or a Class A digital de vice, pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonab le pro ...

  • JVC GM X50U - page 4

    3 – When the product is used on a car t, care should be tak en to avoid quic k stops , excessiv e f orce, and une ven surf aces which may cause the product and car t to ov er turn, damaging equipment or causing possible injury to the operator . – Slots and openings in the cabinet are provided f or ventilation. These ensure reliab le operation o ...

  • JVC GM X50U - page 5

    4 Monitor: Front View 1 Remote sensor/power lamp Point the front end of the wir eless remote contr ol toward here. When the Monitor is turned on, the power lamp glows green. It glows orange in standby mode. 2 Self-diagnostic lamps (page 37) These lamps light/flash if something abnormal occurs with the Monitor . 3 2 / 3 / 5 / ∞ buttons Use these b ...

  • JVC GM X50U - page 6

    5 Monitor: Rear Views 1 1 VIDEO A terminals (page 11) AUDIO (L/MONO, R) input terminals (pin jack) Connect these terminals to the audio input terminals of a VCR, etc. VIDEO IN terminal (BNC) Connect this terminal to the video output terminal of a VCR, etc. VIDEO OUT terminal (BNC) Connect this terminal to the video input terminal of another monitor ...

  • JVC GM X50U - page 7

    6 Parts Identification (Continued) Monitor: Rear Views 2 1 OPTION terminal (page 13) Connect the power cord of the Cooling Fan Unit (not supplied) when installing the Monitor vertically . 2 SPEAKER OUT L/R terminals (page 13) Connect external speakers, such as unique JVC speakers (not supplied), etc. 3 INTERNAL/EXTERNAL (built-in speaker/external s ...

  • JVC GM X50U - page 8

    7 Remote Control 7 2 / 3 / 5 / ∞ buttons Use these buttons to select menu items or make adjustments. 8 MENU/EXIT button Use this button to display or erase menus. While a sub-menu is displayed, pressing this button will move you one screen back to the pr eceding menu. 9 ASPECT button (page 15) Use this button to switch between aspect ratios. Each ...

  • JVC GM X50U - page 9

    8 Preparations Checking the Accessories The following accessories are included with the Monitor . Check for them. If any item is missing, please contact the dealer wher e you purchased the Monitor . • Remote control (RM-C579) x 1 • Power cord x 1 • Batteries (AA/R6P) x 2 • Ferrite core x 2 Installing the Batteries Put the batteries in the r ...

  • JVC GM X50U - page 10

    9 Precautions • When installing the Monitor vertically , make sure the follo wing: – Attach the external cooling fan unit to the Monitor . (See “Connecting the External Cooling Fan Unit“ on page 13.) – Set the speed of the internal cooling fan to “HIGH.” (See “Setting the Speed of the Internal Cooling Fan“ on page 25.) • When in ...

  • JVC GM X50U - page 11

    10 Precautions • Before making connections, turn of f all the equipment. • Use a cord whose plugs ar e correctly matching for the terminals on this Monitor and the equipment. • Plugs should be firmly inserted; poor connection could cause noise. • T o unplug a cord, be sur e to grasp its plug and pull it out. • Connect the power cord after ...

  • JVC GM X50U - page 12

    11 Connection Diagrams VIDEO A VIDEO IN OUT AUDIO L/MONO R VIDEO B AUDIO L/MONO R VIDEO IN Y/C IN COMPONENT/RGB B VIDEO Y/G Pb/B Pr/R HD/Cs VD AUDIO L/MONO R A V connections VCR 1 (used as the pla yback source) VCR 2 (used as the playbac k source) DVD player , etc . (used as the pla yback source) T o video output T o audio output T o video output T ...

  • JVC GM X50U - page 13

    12 Connecting an External Control Unit When connecting the external control unit to the MAKE terminal, you can operate the following functions thr ough the MAKE terminal; • T urn on or off the Monitor . Preparation: The POWER switch on the r ear must be set to “ | (on) ” (so that the Monitor is in standby mode). • Select the input. Preparat ...

  • JVC GM X50U - page 14

    13 Connecting the External Cooling Fan Unit When installing this Monitor vertically , it is requir ed to attach the external cooling fan unit (not supplied). Note: • When installing this Monitor vertically , it is also requir ed to set the speed of the internal cooling fan to “ HIGH ” (see page 25). • If you install the Monitor in such a wa ...

  • JVC GM X50U - page 15

    14 Basic Operations Daily Operations 1 T ur n on the main power . Set the POWER switch on the rear of the Monitor to “ | (on) ” . The power lamp on the upper left of the front panel lights orange. • If you have turned of f the Monitor not by using POWER ON on the remote contr ol (or on the front panel), but by using the POWER switch, setting ...

  • JVC GM X50U - page 16

    15 Changing the Aspect Ratio Precautions for using the screen mode switching function • This Monitor features a scr een mode switching (aspect ratio change) function. If you select a mode differ ent in aspect ratio from softwar e such as TV programs, the pictur e may look differ ent from original pictur e. Be aware of this point when you are sele ...

  • JVC GM X50U - page 17

    16 Video Adjustments Adjusting the Picture Quality Picture quality can be set for each input mode. 1 Pr ess MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 Pr ess 5 / ∞ to move the cursor ( 3 ) to “ PICTURE ADJ. ” 3 Pr ess 3 to display the Picture Adjustment Menu. 4 Pr ess 5 / ∞ to move the cursor ( 3 ) to the item you want t ...

  • JVC GM X50U - page 18

    17 T o make an adjustment while viewing the adjustment bar After step 3 on page 16, proceed as follows: 1 Press 5 / ∞ to move the cursor ( 3 ) to “ sub menu. ” 2 Press 3 to display the Sub Menu. The Sub Menu for CONTRAST appears on the screen. 3 Press 5 / ∞ to select the Sub Menu you want to adjust. Each time you press the button, the Sub M ...

  • JVC GM X50U - page 19

    18 Video Adjustments (Continued) T o make an adjustment while viewing the adjustment bar After step 3 on page 17, proceed as follows: 1 Press 5 / ∞ to move the cursor ( 3 ) to “ sub menu. ” 2 Press 3 to display the Sub Menu. The Sub Menu for H SIZE appears on the scr een. 3 Press 5 / ∞ to select the Sub Menu you want to adjust. Each time yo ...

  • JVC GM X50U - page 20

    19 PICTURE ADJ. SIZE/POSITION ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: MAIN MENU SELECT: EXIT: MENU Adjusting the Color T emperature The adjusted setting applies to all inputs. 1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 Press 5 / ∞ to move the cursor ( 3 ) to “ FUNCTION SELECT . ” 3 Press 3 to display the Functio ...

  • JVC GM X50U - page 21

    20 Video Adjustments (Continued) Setting the Receivable Signal T ypes Y ou can set the receivable signal types. Normally , select “ AUTO. ” A common setting will apply to both the VIDEO A input and the VIDEO B input, and a differ ent setting will apply to the COMPONENT input. 1 Pr ess MENU/EXIT (or MENU on the Monitor) to display the Main Menu. ...

  • JVC GM X50U - page 22

    21 Resetting the Function Selection Menu Settings Y ou can reset all the Function Selection Menu settings at a time. 1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 Press 5 / ∞ to move the cursor ( 3 ) to “ FUNCTION SELECT . ” 3 Press 3 to display the Function Selection Menu. * 1 “ ASPECT ” does not appear when 720/ ...

  • JVC GM X50U - page 23

    22 Other Convenient Functions Showing On-screen Display The input mode and signal type will be indicated on the screen. • Y ou can also show these information by pressing DISPLA Y on the remote contr ol. (See page 14.) 1 Pr ess MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 Pr ess 5 / ∞ to move the cursor ( 3 ) to “ ST A TUS D ...

  • JVC GM X50U - page 24

    23 Showing the On-screen When Changing the Input Mode W ith this function, you can see the selected input mode and signal type when changing the input mode. 1 On the remote contr ol: Press VOLUME – while holding MENU/ EXIT to display the Setup Menu. On the Monitor: Press 2 while holding MENU to display the Setup Menu. 2 Press 5 / ∞ to move the ...

  • JVC GM X50U - page 25

    24 Other Convenient Functions (Continued) Setting the Remote-Controllable Input When connecting the external control unit to the REMOTE MAKE terminal, you need to set the desired input to use, which you can select from the connected external contr ol unit. 1 On the remote contr ol: Pr ess VOLUME – while holding MENU/ EXIT to display the Setup Men ...

  • JVC GM X50U - page 26

    25 Cursor ( 3 ) STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW Setting the Speed of the Internal Cooling Fan Set the speed of the internal cooling fan to “HIGH” when installing the Monitor vertically , so that the internal heat o ...

  • JVC GM X50U - page 27

    26 Other Convenient Functions (Continued) Setting the Clock and the Power On/Off Timer Y ou can turn the Monitor on and off automatically with the Power On/Off timer . • Since you cannot use the timer functions without setting the clock, set the clock at first. • Setting the Clock Y ou can also adjust the clock with the following procedure. 1 O ...

  • JVC GM X50U - page 28

    27 • Using the P ower On/Off Timer Select the item you want to set in step 3 in “ Setting the Clock ” (page 26) and follow the instructions below . POWER-ON SET Y ou can activate/deactivate the Power-On T imer . Press 2 / 3 to select “ ON ” or “ OFF . ” ON : The Monitor automatically turns on at the time set in “ POWER-ON TIME. ” ...

  • JVC GM X50U - page 29

    28 Other Convenient Functions (Continued) Cursor ( 3 ) STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW 2 Pr ess 5 / ∞ to move the cursor ( 3 ) to “ POWER SA VE ” (on the second page). • The Setup Menu consists of two pages. If ...

  • JVC GM X50U - page 30

    29 T o reset the Color -Reverse setting After step 2 on the left column, proceed as follows: 1 Press 5 / ∞ to move the cursor ( 3 ) to “ reset. ” 2 Press 3 . The confirmation screen appears. 3 Press 3 again to reset the setting. T o cancel the reset, press MENU/EXIT (or MENU on the Monitor). Notes: • The Color-Reverse function r equires con ...

  • JVC GM X50U - page 31

    30 STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW Other Convenient Functions (Continued) 3 Pr ess 5 / ∞ to select the item you want to set and set the item as follows. REFRESH Y ou can activate/deactivate the function manually . ? ...

  • JVC GM X50U - page 32

    31 Cursor ( 3 ) Are you sure? "YES" then key. "NO" then key. MENU all reset STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW Are you sure? "YES" then key. "NO" then key. MENU reset 3 Press 3 . Th ...

  • JVC GM X50U - page 33

    32 PICTURE ADJ. SIZE/POSITION ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: MAIN MENU SELECT: EXIT: MENU COLOR TEMP. ASPECT SIGNAL MODE COMPO./RGB B SYNC TERM. reset FUNCTION SELECT ADJUST: SELECT: EXIT: MENU : HIGH : PANORAMIC : AUTO : RGB B : HIGH VIDEO A NTSC H SIZE H POSITION V SIZE V POSITION DOT CLOCK CLOCK PHASE sub menu reset ADJUST: SIZE/POSI ...

  • JVC GM X50U - page 34

    33 PICTURE ADJ. (Picture adjustment): See page 16. CONTRAST Adjusts the contrast of the picture. BRIGHT Adjusts the brightness of the picture. CHROMA* 1 Adjusts the color density of the pictur e. PHASE* 2 Adjusts the color phase. SHARPNESS Adjusts the outlines of the picture. sub menu Displays the fine adjustment bar . reset Resets the Picture Adju ...

  • JVC GM X50U - page 35

    34 STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW R GAIN G GAIN B GAIN sub menu reset ADJUST: WHITE BALANCE:HIGH SELECT: EXIT: MENU : 000 : 001 : 002 : 000 R GAIN :+001 G GAIN : – 002 B GAIN + – + – + – + – PIXEL SHIFT POWE ...

  • JVC GM X50U - page 36

    35 ST A TUS DISPLA Y : See page 23. Sets if you want the input terminal and the type of signal to be indicated on the screen just after inputs ar e switched. CONTROL LOCK: See page 23. Sets the Monitor so that it cannot be operated with the buttons on itself. REMOTE SWITCH: See page 24. Set the selectable input terminals when controlling the Monito ...

  • JVC GM X50U - page 37

    36 T roubleshooting Solutions to common problems r elated to the Monitor ar e described here. If none of the solutions pr esented here solves the problem, unplug the Monitor and consult an authorized dealer or service center . P ower is not supplied. P ower is suddenl y turned on or off. Video image does not appear , or audio sound does not occur . ...

  • JVC GM X50U - page 38

    37 Self-diagnostic Indication When something abnormal occurs with the Monitor , this function informs you of the condition of the Monitor with self-diagnostic lamps, allowing for smooth service work. ❑ If the screen monitor turns off and self-diagnostic lamps light or flash If the self-diagnostic lamps light or flash in r ed, check the following ...

  • JVC GM X50U - page 39

    38 Specifications General Model name GM-X50U F rame color Silver Screen size T ype 50 wide format Aspect ratio 16:9 (Wide format) Number of pix els displa yed 1366 (H) x 768 (V) Number of colors displa yed 16.77 million (256 colors for each of RGB) Eff ective screen size 110.7 cm x 62.2 cm (43 9/16” x 24 7/16”), 127 cm (50”) (W x H, Diagonall ...

  • JVC GM X50U - page 40

    39 * T o use the COMPONENT/RGB B terminals either as the COMPONENT input terminal or as the RGB B input terminal, you need to set “COMPO./RGB B” correctly (see page 20). • For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be mor e or less differ ent from actual pr oducts. • Design ...

  • JVC GM X50U - page 41

    40 Specifications (Continued) Pin assignment (Specifications for terminals) • Y/C terminal • RS-232C terminal This is a female type connector . Pin number Signal name 1 GND (Y) 2 GND (C) 3Y 4C Pin number Signal name 1 DCD 2R D 3T D 4 DTR 5 GND Pin number Signal name 6 DSR 7R T S 8 CTS 9R I 4 3 2 1 9 8 5 7 6 Side view T op view Front view Dimens ...

  • JVC GM X50U - page 42

    41 MEMO 32-41_GM_X50[US].p65 04.1.27, 8:38 AM 41 ...

  • JVC GM X50U - page 43

    GM-X50U PLASMA DISPLAY MONITOR VICTOR COMPANY OF JAPAN, LIMITED © 2004 VICTOR COMPANY OF JAPAN, LIMITED Printed in Japan 0204MKH-MW-VP Cover_GM_X50[US].p65 04.1.27, 8:38 AM 2 ...

  • JVC GM X50U - page 44

    INSTR UCTIONS GM-X50E MENU INPUT PLASMA DISPLA Y MONIT OR BEDIENUNGSANLEITUNG : PLASMABILDSCHIRM MANUEL D’INSTR UCTIONS : MONITEUR DE VISU ALISA TION PLASMA MANU ALE D’ISTRUZIONI : MONIT OR CON SCHERMO AL PLASMA MANU AL DE INSTRUCCIONES : MONIT OR DISPLA Y DE PLASMA LCT1602-001A-U ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL Cover_GM_X50E.p65 04 ...

  • JVC GM X50U - page 45

    Cover_GM_X50E.p65 04.3.25, 3:54 PM 4 ...

  • JVC GM X50U - page 46

    1 ENGLISH INSTR UCTIONS Model GM-X50E Thank you f or purchasing this JVC Monitor . Before using the monitor , read this manual carefully so that you kno w how to use the Monitor correctly . Refer to this man ual whenev er questions or problems about operation arise. Be sure to read and obser ve the saf ety precautions. K eep this manual where the u ...

  • JVC GM X50U - page 47

    2 Safety Precautions EUROPE EMC ST AND ARD NO TICE W arning: This is a class A product. In a domestic en vironment this product ma y cause radio interf erence in which case the user ma y be required to take adequate measure . IMPOR T ANT INFORMA TION W ARNING: T O REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NO T EXPOSE THIS APP ARA TUS T O RAIN, ...

  • JVC GM X50U - page 48

    3 ENGLISH – F or United Kingdom: This product is equipped with a three-wire plug. This plug will fit only into a grounded po wer outlet. If you are unab le to inser t the plug into the outlet, contact y our electrician to install the proper outlet. Do not def eat the saf ety pur pose of the grounded plug. – P ower-supply cords should be routed ...

  • JVC GM X50U - page 49

    4 Monitor: Front View 1 Remote sensor/power lamp Point the front end of the wir eless remote contr ol toward here. When the Monitor is turned on, the power lamp glows green. It glows orange in standby mode. 2 Self-diagnostic lamps (page 37) These lamps light/flash if something abnormal occurs with the Monitor . 3 2 / 3 / 5 / ∞ buttons Use these b ...

  • JVC GM X50U - page 50

    5 ENGLISH Monitor: Rear Views 1 1 VIDEO A terminals (page 11) AUDIO (L/MONO, R) input terminals (pin jack) Connect these terminals to the audio input terminals of a VCR, etc. VIDEO IN terminal (BNC) Connect this terminal to the video output terminal of a VCR, etc. VIDEO OUT terminal (BNC) Connect this terminal to the video input terminal of another ...

  • JVC GM X50U - page 51

    6 Parts Identification (Continued) Monitor: Rear Views 2 1 OPTION terminal (page 13) Connect the power cord of the Cooling Fan Unit (not supplied) when installing the Monitor vertically . 2 SPEAKER OUT L/R terminals (page 13) Connect external speakers, such as unique JVC speakers (not supplied), etc. 3 INTERNAL/EXTERNAL (built-in speaker/external s ...

  • JVC GM X50U - page 52

    7 ENGLISH Remote Control 7 2 / 3 / 5 / ∞ buttons Use these buttons to select menu items or make adjustments. 8 MENU/EXIT button Use this button to display or erase menus. While a sub-menu is displayed, pressing this button will move you one screen back to the pr eceding menu. 9 ASPECT button (page 15) Use this button to switch between aspect rati ...

  • JVC GM X50U - page 53

    8 Preparations Checking the Accessories The following accessories are included with the Monitor . Check for them. If any item is missing, please contact the dealer where you purchased the Monitor . • Remote control (RM-C579) x 1 • Power cord x 2 (Use the one matching the wall outlet.) • Batteries (AA/R6P) x 2 • Ferrite core x 2 Installing t ...

  • JVC GM X50U - page 54

    9 ENGLISH Precautions • When installing the Monitor vertically , make sure the f ollowing: – Attach the external cooling fan unit to the Monitor . (See “Connecting the External Cooling Fan Unit“ on page 13.) – Set the speed of the internal cooling fan to “HIGH.” (See “Setting the Speed of the Internal Cooling Fan“ on page 25.) • ...

  • JVC GM X50U - page 55

    10 Precautions • Before making connections, turn of f all the equipment. • Use a cord whose plugs ar e correctly matching for the terminals on this Monitor and the equipment. • Plugs should be firmly inserted; poor connection could cause noise. • T o unplug a cord, be sure to grasp its plug and pull it out. • Connect the power cord after ...

  • JVC GM X50U - page 56

    11 ENGLISH Connection Diagrams VIDEO A VIDEO IN OUT AUDIO L/MONO R VIDEO B AUDIO L/MONO R VIDEO IN Y/C IN COMPONENT/RGB B VIDEO Y/G Pb/B Pr/R HD/Cs VD AUDIO L/MONO R A V connections VCR 1 (used as the pla yback source) VCR 2 (used as the playbac k source) DVD player , etc . (used as the pla yback source) T o video output T o audio output T o video ...

  • JVC GM X50U - page 57

    12 Connections (Continued) VIDEO DISPLAY OFF POWER RM–C579 REMOTE CONTROL UNIT ON ASPECT MUTING MENU/EXIT VOLUME A COMPO. /(RGB B) BR G B A INPUT SELECT ❊ AC IN AUDIO L OUT R RGB A AUDIO IN REMOTE RS-232C WIRED MAKE POWER T ypical connections P ersonal computer (used as the pla yback source) P ersonal computer (used to control the Monitor) Cabl ...

  • JVC GM X50U - page 58

    13 ENGLISH External Speaker Connection How to connect the cords Note: It is recommended to use the speaker unit—TS-C500SPG (not supplied) as the external speakers. Y ou can also connect any speakers of the following specifications: • Impedance: Between 6 Ω and 8 Ω • Power handling capacity: More than 3 W ª · ª · When using e xter nal ...

  • JVC GM X50U - page 59

    14 Basic Operations Daily Operations 1 T ur n on the main power . Set the POWER switch on the rear of the Monitor to “ | (on)”. The power lamp on the upper left of the front panel lights orange. • If you have turned of f the Monitor not by using POWER ON on the remote contr ol (or on the front panel), but by using the POWER switch, setting th ...

  • JVC GM X50U - page 60

    15 ENGLISH Changing the Aspect Ratio Precautions for using the screen mode switching function • This Monitor features a scr een mode switching (aspect ratio change) function. If you select a mode differ ent in aspect ratio from softwar e such as TV programs, the pictur e may look differ ent from original pictur e. Be aware of this point when you ...

  • JVC GM X50U - page 61

    16 Video Adjustments Adjusting the Picture Quality Picture quality can be set for each input mode. 1 Pr ess MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 Pr ess 5 / ∞ to move the cursor ( 3 ) to “PICTURE ADJ.” 3 Pr ess 3 to display the Picture Adjustment Menu. 4 Pr ess 5 / ∞ to move the cursor ( 3 ) to the item you want to ...

  • JVC GM X50U - page 62

    17 ENGLISH T o make an adjustment while viewing the adjustment bar After step 3 on page 16, proceed as follows: 1 Press 5 / ∞ to move the cursor ( 3 ) to “sub menu.” 2 Press 3 to display the Sub Menu. The Sub Menu for CONTRAST appears on the screen. 3 Press 5 / ∞ to select the Sub Menu you want to adjust. Each time you press the button, the ...

  • JVC GM X50U - page 63

    18 Video Adjustments (Continued) T o make an adjustment while viewing the adjustment bar After step 3 on page 17, proceed as follows: 1 Press 5 / ∞ to move the cursor ( 3 ) to “sub menu.” 2 Press 3 to display the Sub Menu. The Sub Menu for H SIZE appears on the scr een. 3 Press 5 / ∞ to select the Sub Menu you want to adjust. Each time you ...

  • JVC GM X50U - page 64

    19 ENGLISH PICTURE ADJ. SIZE/POSITION ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: MAIN MENU SELECT: EXIT: MENU Adjusting the Color T emperature The adjusted setting applies to all inputs. 1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 Press 5 / ∞ to move the cursor ( 3 ) to “FUNCTION SELECT .” 3 Press 3 to display the F ...

  • JVC GM X50U - page 65

    20 Video Adjustments (Continued) Setting the Receivable Signal T ypes Y ou can set the receivable signal types. Normally , select “AUTO.” A common setting will apply to both the VIDEO A input and the VIDEO B input, and a differ ent setting will apply to the COMPONENT input. 1 Pr ess MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 ...

  • JVC GM X50U - page 66

    21 ENGLISH Resetting the Function Selection Menu Settings Y ou can reset all the Function Selection Menu settings at a time. 1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 Press 5 / ∞ to move the cursor ( 3 ) to “FUNCTION SELECT .” 3 Press 3 to display the Function Selection Menu. * 1 “ASPECT” does not appear when ...

  • JVC GM X50U - page 67

    22 Other Convenient Functions Showing On-screen Display The input mode and signal type will be indicated on the screen. • Y ou can also show these information by pressing DISPLA Y on the remote contr ol. (See page 14.) 1 Pr ess MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 Pr ess 5 / ∞ to move the cursor ( 3 ) to “ST A TUS DI ...

  • JVC GM X50U - page 68

    23 ENGLISH Showing the On-screen When Changing the Input Mode W ith this function, you can see the selected input mode and signal type when changing the input mode. 1 On the remote contr ol: Press VOLUME – while holding MENU/ EXIT to display the Setup Menu. On the Monitor: Press 2 while holding MENU to display the Setup Menu. 2 Press 5 / ∞ to m ...

  • JVC GM X50U - page 69

    24 Other Convenient Functions (Continued) Setting the Remote-Controllable Input When connecting the external control unit to the REMOTE MAKE terminal, you need to set the desired input to use, which you can select from the connected external contr ol unit. 1 On the remote contr ol: Pr ess VOLUME – while holding MENU/ EXIT to display the Setup Men ...

  • JVC GM X50U - page 70

    25 ENGLISH Cursor ( 3 ) STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW Setting the Speed of the Internal Cooling Fan Set the speed of the internal cooling fan to “HIGH” when installing the Monitor vertically , so that the interna ...

  • JVC GM X50U - page 71

    26 Other Convenient Functions (Continued) Setting the Clock and the Power On/Off Timer Y ou can turn the Monitor on and off automatically with the Power On/Off timer . • Since you cannot use the timer functions without setting the clock, set the clock at first. • Setting the Clock Y ou can also adjust the clock with the following procedure. 1 O ...

  • JVC GM X50U - page 72

    27 ENGLISH • Using the P ower On/Off Timer Select the item you want to set in step 3 in “Setting the Clock” (page 26) and follow the instructions below . POWER-ON SET Y ou can activate/deactivate the Power-On T imer . Press 2 / 3 to select “ON” or “OFF .” ON : The Monitor automatically turns on at the time set in “POWER-ON TIME.” ...

  • JVC GM X50U - page 73

    28 Other Convenient Functions (Continued) Cursor ( 3 ) STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW 2 Pr ess 5 / ∞ to move the cursor ( 3 ) to “POWER SA VE” (on the second page). • The Setup Menu consists of two pages. If y ...

  • JVC GM X50U - page 74

    29 ENGLISH T o reset the Color -Reverse setting After step 2 on the left column, proceed as follows: 1 Press 5 / ∞ to move the cursor ( 3 ) to “reset.” 2 Press 3 . The confirmation screen appears. 3 Press 3 again to reset the setting. T o cancel the reset, press MENU/EXIT (or MENU on the Monitor). Note: • The Color-Reverse function r equir ...

  • JVC GM X50U - page 75

    30 STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW Other Convenient Functions (Continued) 3 Pr ess 5 / ∞ to select the item you want to set and set the item as follows. REFRESH Y ou can activate/deactivate the function manually . ? ...

  • JVC GM X50U - page 76

    31 ENGLISH Cursor ( 3 ) Are you sure? "YES" then key. "NO" then key. MENU all reset STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW Are you sure? "YES" then key. "NO" then key. MENU reset 3 Pres ...

  • JVC GM X50U - page 77

    32 PICTURE ADJ. SIZE/POSITION ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: MAIN MENU SELECT: EXIT: MENU COLOR TEMP. ASPECT SIGNAL MODE COMPO./RGB B SYNC TERM. reset FUNCTION SELECT ADJUST: SELECT: EXIT: MENU : HIGH : PANORAMIC : AUTO : RGB B : HIGH VIDEO A NTSC H SIZE H POSITION V SIZE V POSITION DOT CLOCK CLOCK PHASE sub menu reset ADJUST: SIZE/POSI ...

  • JVC GM X50U - page 78

    33 ENGLISH PICTURE ADJ. (Picture adjustment): See page 16. CONTRAST Adjusts the contrast of the picture. BRIGHT Adjusts the brightness of the picture. CHROMA* 1 Adjusts the color density of the pictur e. PHASE* 2 Adjusts the color phase. SHARPNESS Adjusts the outlines of the picture. sub menu Displays the fine adjustment bar . reset Resets the Pict ...

  • JVC GM X50U - page 79

    34 STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW R GAIN G GAIN B GAIN sub menu reset ADJUST: WHITE BALANCE:HIGH SELECT: EXIT: MENU : 000 : 001 : 002 : 000 R GAIN :+001 G GAIN : – 002 B GAIN + – + – + – + – PIXEL SHIFT POWE ...

  • JVC GM X50U - page 80

    35 ENGLISH ST A TUS DISPLA Y : See page 23. Sets if you want the input terminal and the type of signal to be indicated on the screen just after inputs ar e switched. CONTROL LOCK: See page 23. Sets the Monitor so that it cannot be operated with the buttons on itself. REMOTE SWITCH: See page 24. Set the selectable input terminals when controlling th ...

  • JVC GM X50U - page 81

    36 T roubleshooting Solutions to common problems r elated to the Monitor ar e described here. If none of the solutions pr esented here solves the problem, unplug the Monitor and consult an authorized dealer or service center . P ower is not supplied. P ower is suddenl y turned on or off. Video image does not appear , or audio sound does not occur . ...

  • JVC GM X50U - page 82

    37 ENGLISH Self-diagnostic Indication When something abnormal occurs with the Monitor , this function informs you of the condition of the Monitor with self-diagnostic lamps, allowing for smooth service work. ❑ If the screen monitor turns off and self-diagnostic lamps light or flash If the self-diagnostic lamps light or flash in r ed, check the fo ...

  • JVC GM X50U - page 83

    38 Specifications General Model name GM-X50E F rame color Silver Screen size T ype 50 wide format Aspect ratio 16:9 (Wide format) Number of pix els displa yed 1366 (H) x 768 (V) Number of colors displa yed 16.77 million (256 colors for each of RGB) Eff ective screen size 110.7 cm x 62.2 cm, 127 cm (W x H, Diagonally) W eight 50 k g External dimensi ...

  • JVC GM X50U - page 84

    39 ENGLISH * T o use the COMPONENT/RGB B terminals either as the COMPONENT input terminal or as the RGB B input terminal, you need to set “COMPO./RGB B” correctly (see page 20). • For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be mor e or less differ ent from actual pr oducts. ? ...

  • JVC GM X50U - page 85

    40 Specifications (Continued) Pin assignment (Specifications for terminals) • Y/C terminal • RS-232C terminal This is a female type connector . Pin number Signal name 1 GND (Y) 2 GND (C) 3Y 4C Pin number Signal name 1 DCD 2R D 3T D 4 DTR 5 GND Pin number Signal name 6 DSR 7R T S 8 CTS 9R I 4 3 2 1 9 8 5 7 6 Side view T op view Front view Dimens ...

  • JVC GM X50U - page 86

    VICTOR COMPANY OF JAPAN, LIMITED © 2004 VICTOR COMPANY OF JAPAN, LIMITED 0304MKH-MW-MU Cover_GM_X50E.p65 04.3.25, 3:54 PM 2 ...

  • JVC GM X50U - page 87

    INSTR UCTIONS GM-X50S MENU INPUT PLASMA DISPLA Y MONIT OR BEDIENUNGSANLEITUNG : PLASMABILDSCHIRM MANUEL D’INSTR UCTIONS : MONITEUR DE VISU ALISA TION PLASMA MANU ALE D’ISTRUZIONI : MONIT OR CON SCHERMO AL PLASMA MANU AL DE INSTRUCCIONES : MONIT OR DISPLA Y DE PLASMA LCT1603-001A ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL Cover_GM_X50S.p65 04.3 ...

  • JVC GM X50U - page 88

    1 ENGLISH INSTR UCTIONS Model GM-X50S Thank you f or purchasing this JVC Monitor . Before using the monitor , read this manual carefully so that you kno w how to use the Monitor correctly . Refer to this man ual whenev er questions or prob lems about operation arise. Be sure to read and obser ve the saf ety precautions. K eep this manual where the ...

  • JVC GM X50U - page 89

    2 Safety Precautions EUROPE EMC ST AND ARD NO TICE W arning: This is a class A product. In a domestic en vironment this product ma y cause radio interf erence in which case the user ma y be required to take adequate measure . IMPOR T ANT INFORMA TION W ARNING: T O REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NO T EXPOSE THIS APP ARA TUS T O RAIN, ...

  • JVC GM X50U - page 90

    3 ENGLISH – F or United Kingdom: This product is equipped with a three-wire plug. This plug will fit only into a grounded po wer outlet. If you are unab le to inser t the plug into the outlet, contact y our electrician to install the proper outlet. Do not def eat the saf ety pur pose of the grounded plug. – P ower-supply cords should be routed ...

  • JVC GM X50U - page 91

    4 Monitor: Front View 1 Remote sensor/power lamp Point the front end of the wir eless remote contr ol toward here. When the Monitor is turned on, the power lamp glows green. It glows orange in standby mode. 2 Self-diagnostic lamps (page 37) These lamps light/flash if something abnormal occurs with the Monitor . 3 2 / 3 / 5 / ∞ buttons Use these b ...

  • JVC GM X50U - page 92

    5 ENGLISH Monitor: Rear Views 1 1 VIDEO A terminals (page 11) AUDIO (L/MONO, R) input terminals (pin jack) Connect these terminals to the audio input terminals of a VCR, etc. VIDEO IN terminal (BNC) Connect this terminal to the video output terminal of a VCR, etc. VIDEO OUT terminal (BNC) Connect this terminal to the video input terminal of another ...

  • JVC GM X50U - page 93

    6 Parts Identification (Continued) Monitor: Rear Views 2 1 OPTION terminal (page 13) Connect the power cord of the Cooling Fan Unit (not supplied) when installing the Monitor vertically . 2 SPEAKER OUT L/R terminals (page 13) Connect external speakers, such as unique JVC speakers (not supplied), etc. 3 INTERNAL/EXTERNAL (built-in speaker/external s ...

  • JVC GM X50U - page 94

    7 ENGLISH Remote Control 7 2 / 3 / 5 / ∞ buttons Use these buttons to select menu items or make adjustments. 8 MENU/EXIT button Use this button to display or erase menus. While a sub-menu is displayed, pressing this button will move you one screen back to the pr eceding menu. 9 ASPECT button (page 15) Use this button to switch between aspect rati ...

  • JVC GM X50U - page 95

    8 Preparations Checking the Accessories The following accessories are included with the Monitor . Check for them. If any item is missing, please contact the dealer where you purchased the Monitor . • Remote control (RM-C579) x 1 • Power cord x 2 (3 for Australia) (Use the one matching the wall outlet.) • Batteries (AA/R6P) x 2 • BNC-RCA con ...

  • JVC GM X50U - page 96

    9 ENGLISH Precautions • When installing the Monitor vertically , make sure the f ollowing: – Attach the external cooling fan unit to the Monitor . (See “Connecting the External Cooling Fan Unit“ on page 13.) – Set the speed of the internal cooling fan to “HIGH.” (See “Setting the Speed of the Internal Cooling Fan“ on page 25.) • ...

  • JVC GM X50U - page 97

    10 Precautions • Before making connections, turn of f all the equipment. • Use a cord whose plugs ar e correctly matching for the terminals on this Monitor and the equipment. • Plugs should be firmly inserted; poor connection could cause noise. • T o unplug a cord, be sure to grasp its plug and pull it out. • Connect the power cord after ...

  • JVC GM X50U - page 98

    11 ENGLISH Connection Diagrams VIDEO A VIDEO IN OUT AUDIO L/MONO R VIDEO B AUDIO L/MONO R VIDEO IN Y/C IN COMPONENT/RGB B VIDEO Y/G Pb/B Pr/R HD/Cs VD AUDIO L/MONO R A V connections VCR 1 (used as the pla yback source) VCR 2 (used as the playbac k source) DVD player , etc . (used as the pla yback source) T o video output T o audio output T o video ...

  • JVC GM X50U - page 99

    12 Connections (Continued) VIDEO DISPLAY OFF POWER RM–C579 REMOTE CONTROL UNIT ON ASPECT MUTING MENU/EXIT VOLUME A COMPO. /(RGB B) BR G B A INPUT SELECT ❊ AC IN AUDIO L OUT R RGB A AUDIO IN REMOTE RS-232C WIRED MAKE POWER T ypical connections P ersonal computer (used as the pla yback source) P ersonal computer (used to control the Monitor) Cabl ...

  • JVC GM X50U - page 100

    13 ENGLISH External Speaker Connection How to connect the cords Note: It is recommended to use the speaker unit—TS-C500SPG (not supplied) as the external speakers. Y ou can also connect any speakers of the following specifications: • Impedance: Between 6 Ω and 8 Ω • Power handling capacity: More than 3 W ª · ª · When using e xter nal ...

  • JVC GM X50U - page 101

    14 Basic Operations Daily Operations 1 T ur n on the main power . Set the POWER switch on the rear of the Monitor to “ | (on)”. The power lamp on the upper left of the front panel lights orange. • If you have turned of f the Monitor not by using POWER ON on the remote contr ol (or on the front panel), but by using the POWER switch, setting th ...

  • JVC GM X50U - page 102

    15 ENGLISH Changing the Aspect Ratio Precautions for using the screen mode switching function • This Monitor features a scr een mode switching (aspect ratio change) function. If you select a mode differ ent in aspect ratio from softwar e such as TV programs, the pictur e may look differ ent from original pictur e. Be aware of this point when you ...

  • JVC GM X50U - page 103

    16 Video Adjustments Adjusting the Picture Quality Picture quality can be set for each input mode. 1 Pr ess MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 Pr ess 5 / ∞ to move the cursor ( 3 ) to “PICTURE ADJ.” 3 Pr ess 3 to display the Picture Adjustment Menu. 4 Pr ess 5 / ∞ to move the cursor ( 3 ) to the item you want to ...

  • JVC GM X50U - page 104

    17 ENGLISH T o make an adjustment while viewing the adjustment bar After step 3 on page 16, proceed as follows: 1 Press 5 / ∞ to move the cursor ( 3 ) to “sub menu.” 2 Press 3 to display the Sub Menu. The Sub Menu for CONTRAST appears on the screen. 3 Press 5 / ∞ to select the Sub Menu you want to adjust. Each time you press the button, the ...

  • JVC GM X50U - page 105

    18 Video Adjustments (Continued) T o make an adjustment while viewing the adjustment bar After step 3 on page 17, proceed as follows: 1 Press 5 / ∞ to move the cursor ( 3 ) to “sub menu.” 2 Press 3 to display the Sub Menu. The Sub Menu for H SIZE appears on the scr een. 3 Press 5 / ∞ to select the Sub Menu you want to adjust. Each time you ...

  • JVC GM X50U - page 106

    19 ENGLISH PICTURE ADJ. SIZE/POSITION ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: MAIN MENU SELECT: EXIT: MENU Adjusting the Color T emperature The adjusted setting applies to all inputs. 1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 Press 5 / ∞ to move the cursor ( 3 ) to “FUNCTION SELECT .” 3 Press 3 to display the F ...

  • JVC GM X50U - page 107

    20 Video Adjustments (Continued) Setting the Receivable Signal T ypes Y ou can set the receivable signal types. Normally , select “AUTO.” A common setting will apply to both the VIDEO A input and the VIDEO B input, and a differ ent setting will apply to the COMPONENT input. 1 Pr ess MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 ...

  • JVC GM X50U - page 108

    21 ENGLISH Resetting the Function Selection Menu Settings Y ou can reset all the Function Selection Menu settings at a time. 1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 Press 5 / ∞ to move the cursor ( 3 ) to “FUNCTION SELECT .” 3 Press 3 to display the Function Selection Menu. * 1 “ASPECT” does not appear when ...

  • JVC GM X50U - page 109

    22 Other Convenient Functions Showing On-screen Display The input mode and signal type will be indicated on the screen. • Y ou can also show these information by pressing DISPLA Y on the remote contr ol. (See page 14.) 1 Pr ess MENU/EXIT (or MENU on the Monitor) to display the Main Menu. 2 Pr ess 5 / ∞ to move the cursor ( 3 ) to “ST A TUS DI ...

  • JVC GM X50U - page 110

    23 ENGLISH Showing the On-screen When Changing the Input Mode W ith this function, you can see the selected input mode and signal type when changing the input mode. 1 On the remote contr ol: Press VOLUME – while holding MENU/ EXIT to display the Setup Menu. On the Monitor: Press 2 while holding MENU to display the Setup Menu. 2 Press 5 / ∞ to m ...

  • JVC GM X50U - page 111

    24 Other Convenient Functions (Continued) Setting the Remote-Controllable Input When connecting the external control unit to the REMOTE MAKE terminal, you need to set the desired input to use, which you can select from the connected external contr ol unit. 1 On the remote contr ol: Pr ess VOLUME – while holding MENU/ EXIT to display the Setup Men ...

  • JVC GM X50U - page 112

    25 ENGLISH Cursor ( 3 ) STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW Setting the Speed of the Internal Cooling Fan Set the speed of the internal cooling fan to “HIGH” when installing the Monitor vertically , so that the interna ...

  • JVC GM X50U - page 113

    26 Other Convenient Functions (Continued) Setting the Clock and the Power On/Off Timer Y ou can turn the Monitor on and off automatically with the Power On/Off timer . • Since you cannot use the timer functions without setting the clock, set the clock at first. • Setting the Clock Y ou can also adjust the clock with the following procedure. 1 O ...

  • JVC GM X50U - page 114

    27 ENGLISH • Using the P ower On/Off Timer Select the item you want to set in step 3 in “Setting the Clock” (page 26) and follow the instructions below . POWER-ON SET Y ou can activate/deactivate the Power-On T imer . Press 2 / 3 to select “ON” or “OFF .” ON : The Monitor automatically turns on at the time set in “POWER-ON TIME.” ...

  • JVC GM X50U - page 115

    28 Other Convenient Functions (Continued) Cursor ( 3 ) STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW 2 Pr ess 5 / ∞ to move the cursor ( 3 ) to “POWER SA VE” (on the second page). • The Setup Menu consists of two pages. If y ...

  • JVC GM X50U - page 116

    29 ENGLISH T o reset the Color -Reverse setting After step 2 on the left column, proceed as follows: 1 Press 5 / ∞ to move the cursor ( 3 ) to “reset.” 2 Press 3 . The confirmation screen appears. 3 Press 3 again to reset the setting. T o cancel the reset, press MENU/EXIT (or MENU on the Monitor). Note: • The Color-Reverse function r equir ...

  • JVC GM X50U - page 117

    30 STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW Other Convenient Functions (Continued) 3 Pr ess 5 / ∞ to select the item you want to set and set the item as follows. REFRESH Y ou can activate/deactivate the function manually . ? ...

  • JVC GM X50U - page 118

    31 ENGLISH Cursor ( 3 ) Are you sure? "YES" then key. "NO" then key. MENU all reset STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW Are you sure? "YES" then key. "NO" then key. MENU reset 3 Pres ...

  • JVC GM X50U - page 119

    32 PICTURE ADJ. SIZE/POSITION ADJ. FUNCTION SELECT STATUS DISPLAY ENTER: MAIN MENU SELECT: EXIT: MENU COLOR TEMP. ASPECT SIGNAL MODE COMPO./RGB B SYNC TERM. reset FUNCTION SELECT ADJUST: SELECT: EXIT: MENU : HIGH : PANORAMIC : AUTO : RGB B : HIGH VIDEO A NTSC H SIZE H POSITION V SIZE V POSITION DOT CLOCK CLOCK PHASE sub menu reset ADJUST: SIZE/POSI ...

  • JVC GM X50U - page 120

    33 ENGLISH PICTURE ADJ. (Picture adjustment): See page 16. CONTRAST Adjusts the contrast of the picture. BRIGHT Adjusts the brightness of the picture. CHROMA* 1 Adjusts the color density of the pictur e. PHASE* 2 Adjusts the color phase. SHARPNESS Adjusts the outlines of the picture. sub menu Displays the fine adjustment bar . reset Resets the Pict ...

  • JVC GM X50U - page 121

    34 STATUS DISPLAY CONTROL LOCK REMOTE SWITCH HD SIGNAL MODE FAN SPEED WHITE BALANCE TIMER SET-UP MENU 1/2 ADJUST: SELECT: EXIT: MENU : OFF : OFF : MODE1 : 1080i : LOW R GAIN G GAIN B GAIN sub menu reset ADJUST: WHITE BALANCE:HIGH SELECT: EXIT: MENU : 000 : 001 : 002 : 000 R GAIN :+001 G GAIN : – 002 B GAIN + – + – + – + – PIXEL SHIFT POWE ...

  • JVC GM X50U - page 122

    35 ENGLISH ST A TUS DISPLA Y : See page 23. Sets if you want the input terminal and the type of signal to be indicated on the screen just after inputs ar e switched. CONTROL LOCK: See page 23. Sets the Monitor so that it cannot be operated with the buttons on itself. REMOTE SWITCH: See page 24. Set the selectable input terminals when controlling th ...

  • JVC GM X50U - page 123

    36 T roubleshooting Solutions to common problems r elated to the Monitor ar e described here. If none of the solutions pr esented here solves the problem, unplug the Monitor and consult an authorized dealer or service center . P ower is not supplied. P ower is suddenl y turned on or off. Video image does not appear , or audio sound does not occur . ...

  • JVC GM X50U - page 124

    37 ENGLISH Self-diagnostic Indication When something abnormal occurs with the Monitor , this function informs you of the condition of the Monitor with self-diagnostic lamps, allowing for smooth service work. ❑ If the screen monitor turns off and self-diagnostic lamps light or flash If the self-diagnostic lamps light or flash in r ed, check the fo ...

  • JVC GM X50U - page 125

    38 Specifications General Model name GM-X50S F rame color Silver Screen size T ype 50 wide format Aspect ratio 16:9 (Wide format) Number of pix els displa yed 1366 (H) x 768 (V) Number of colors displa yed 16.77 million (256 colors for each of RGB) Eff ective screen size 110.7 cm x 62.2 cm, 127 cm (W x H, Diagonally) W eight 50 k g External dimensi ...

  • JVC GM X50U - page 126

    39 ENGLISH * T o use the COMPONENT/RGB B terminals either as the COMPONENT input terminal or as the RGB B input terminal, you need to set “COMPO./RGB B” correctly (see page 20). • For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be mor e or less differ ent from actual pr oducts. ? ...

  • JVC GM X50U - page 127

    40 Specifications (Continued) Pin assignment (Specifications for terminals) • Y/C terminal • RS-232C terminal This is a female type connector . Pin number Signal name 1 GND (Y) 2 GND (C) 3Y 4C Pin number Signal name 1 DCD 2R D 3T D 4 DTR 5 GND Pin number Signal name 6 DSR 7R T S 8 CTS 9R I 4 3 2 1 9 8 5 7 6 Side view T op view Front view Dimens ...

  • JVC GM X50U - page 128

    VICTOR COMPANY OF JAPAN, LIMITED © 2004 VICTOR COMPANY OF JAPAN, LIMITED Printed in Japan 0304MKH-MW-VP Cover_GM_X50S.p65 04.3.1, 2:36 PM 2 ...

Fabricante JVC Categoría Flat Panel Television

Los documentos del dispositivo JVC GM X50U que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos JVC
- manuales de instrucciones GM X50U
- hojas de producto JVC
- folletos informativos
- o etiquetas energéticas JVC GM X50U
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones JVC GM X50U.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje JVC GM X50U, instrucciones de servicio, instrucciones cortas o instrucciones de usuario JVC GM X50U. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto JVC GM X50U.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo JVC GM X50U, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar JVC GM X50U. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de JVC GM X50U.

El manual de instrucciones completo de JVC debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual JVC GM X50U - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice JVC GM X50U, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de JVC GM X50U que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo JVC GM X50U - que deben facilitarnos los primeros pasos durante el uso de JVC GM X50U
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con JVC GM X50U
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de JVC GM X50U en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de JVC GM X50U?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con JVC GM X50U, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con JVC GM X50U probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)