-
Oki 10i - page 1
Read Me First 10irgb.p65 01/04/98, 10:55 1 ...
-
Oki 10i - page 2
OKIP A GE 10i 2 Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki assumes no responsibility for the results of errors beyond its control. Oki also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the a ...
-
Oki 10i - page 3
Read Me First 3 English Contents Safety Instructions .......................................................... 4 Important W iring Instructions ....................................... 5 Printer Features ............................................................... 6 Optional Accessories ...................................................... 6 Ch ...
-
Oki 10i - page 4
OKIP A GE 10i 4 Safety Instructions Y our Oki printer has been car efully designed to gi ve you years of safe, reliable performance. As with all electrical equipment, ho wev er , there are a fe w basic precautions yo u should take to avoid hurting yourself or damaging the printer: • Read the setup instructions in this handbook carefully . Be sure ...
-
Oki 10i - page 5
Read Me First 5 English • Aside from the routine maintenance described in this handbook, do not try to service the printer yourself; opening the cover may expose you to shocks or other hazards. • Lifting the top cover exposes hot surfaces. These are clear ly la belled . Do NO T touch them. • Do not make any adjustments other than those outlin ...
-
Oki 10i - page 6
OKIP A GE 10i 6 Printer Features • LED 10ppm Page Printer • 600 × 1200 dpi • HP LaserJet 6p (PCL6) compatible • Additional emulations for IBM ProPrinter XL and Epson FX • 2Mb memory standard • Multilingual front panel – 12 languages • High speed, bi-directional parallel interface (IEEE-1284) • Fast RISC processor for speedy print ...
-
Oki 10i - page 7
Read Me First 7 English 1 2 3 4 5 6 7 Check the Contents The following sections will lead you through installing your printer , changing the default language, viewing and chang ing the default menu settings and finally producing a Demo Print Page, a Sample Font Listing and Menu Settings list. After unpacking the printer and choosing a suitable plac ...
-
Oki 10i - page 8
OKIP A GE 10i 8 Printer Components Power cable receptacle Rear paper exit tray Power switch T op paper e xit bin Manual feed tray Automatic paper feed tray Bi-directional parallel interface port LED array Image drum cartridge with toner installed 10irgb.p65 01/04/98, 10:56 8 ...
-
Oki 10i - page 9
Read Me First 9 English Setting Up Y our Printer Before connecting the printer to your PC and mains outlet, you must first install the toner cartridge and insert paper in the paper tray . Remove the Protective Sheet 1. Remove any adhesive tape from the outer covers. Press and open the cover . The first time you open the top cover will be to install ...
-
Oki 10i - page 10
OKIP A GE 10i 10 Installing T oner Do not remove cartridge from packaging. Use OKI T ype 5 image drum and toner cartr idges onl y . 1. Remove the sponge and discard. 2. Shak e the toner car tridge to e venly distribute toner . 3. Unwrap the new cartridge. 4. Carefully peel off the sealing tape. 10irgb.p65 01/04/98, 10:56 10 ...
-
Oki 10i - page 11
Read Me First 11 English 1 2 5 . Insert the cart r idge into the printer , left end f irst as illustrated. 6. Push the coloured tab forward to release the toner into the toner hopper . 7. Close the printer cover . 10irgb.p65 01/04/98, 10:56 11 ...
-
Oki 10i - page 12
OKIP A GE 10i 12 1 2 1 3 Installing Paper 1. Remove the paper tray from the bottom of the printer and place plain paper in the tray , carefully k ee ping the lev el of the paper in the tray below the guide marks (1). 2. Adjust the rear paper support (2) to the size of paper you are using by lifting up and sliding forwards or backwards as necessary ...
-
Oki 10i - page 13
Read Me First 13 English Connecting Y our Printer Make sure your printer is not plugged in and your computer is turned off. 1. Plug the interface cable into the parallel socket on the printer . 2. Plug the power cable into the printer , then into a grounded outlet. The parallel cable should support bi-directional communication and must be shielded. ...
-
Oki 10i - page 14
OKIP A GE 10i 14 Installing the Printer Driver Fr om Windo ws™ 3.1x/NT 3.51 1. From the Windo ws Control Panel, double-click the Printers icon. 2. Click the Install button. 3. Choose Unlisted Printer from the list of printers. 4. Click the Add button. 5. Insert the Oki Windo ws 3.1x/NT 3.51 driver disk ette into drive A , and clic k the OK button ...
-
Oki 10i - page 15
Read Me First 15 English Creating Sample Printouts Demo Page 1 . Press the ON-LINE button so that the display reads OFF-LINE . 2. Press the FORM FEED/Print Demo button for two seconds. 3. The message DEMO HP PCL6 will be displayed. 4. Press ENTER . Sample Font Listing 1 . Press the ON-LINE button so that the display reads OFF-LINE . 2. Press the TR ...
-
Oki 10i - page 16
OKIP A GE 10i 16 Index A Accessories 6, 8 C Cable data interface 13 power 5, 7, 13 Cleaning the printer 4 Compatibility 6 Components 8 D Demo page 15 F Features 6 Fonts 15 I Interface cable. See Parallel cable. L Language display 15 changing 15 Locating the printer 4 M Memory 6 O ON/OFF switch 13 Optional accessories 6 P Paper exit 8 installing 12 ...
¿Tienes una pregunta acerca de Oki 10i?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Oki 10i, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Oki 10i probablemente compartirá una forma de solucionarlo.