-
Vienna Acoustics 101267 - page 1
4. March 2004 OWNER´S MANUAL Now, as always, speakers form the most important link in a stereo and home theater system. There - fore, they should be positioned and connected with care. It is our hope that the information contained within this manual will help you in set ting up your new speakers so that they may provide you with many years of list ...
-
Vienna Acoustics 101267 - page 2
ROOM TREATMENT Good sounding rooms have a well - balanced acoustic. This does not mean that your home needs to look like a recording studio. Commonly found furnishings such as bookshelves, carpeting and furniture all exhibit beneficial amounts of absorption and dispersion. Rooms with little furniture, carpeting or other surfaces will demonstrate po ...
-
Vienna Acoustics 101267 - page 3
It is also recommended, that the area around your speakers remain uncluttered, allowing for unob - structed dispersion of the audio signal. Please give the speakers around 30 hours of initial playing time prior to critical listening . As with any loudspeaker, pl aying time is required to allow both mechanical and electrical devices in the loudspeak ...
-
Vienna Acoustics 101267 - page 4
mounting device, unrivalled in its ability to provide the best environment for superior sound quality. Three positions are afforded by this bracket, enabling the speaker to be angled toward the listening positioning for best performance. The bolts that fix the angled position presses the cabinet against a rubber decoupling device, there - fore damp ...
-
Vienna Acoustics 101267 - page 5
101 267 558 0°-12,5°-25° 101 267 558 141 267 525 0°-12,5°-25° 210 267 141 210 267 101 0°-12,5°-25° ...
-
Vienna Acoustics 101267 - page 6
MOUNTING WEBERN & BERG A. On wall application: To prepare the speakers for wall mounting: 1. Please put on the enclosed gloves to avoid fingerprints. 2. Remove the aluminium inlays on the top and bottom of the speakers. As they are attached with magnets, they simply lift off. 3. Put the matching wall - mounting inlay on each speaker, so that th ...
-
Vienna Acoustics 101267 - page 7
...
-
Vienna Acoustics 101267 - page 8
To attach the wall - mounting device to the wall: ATTENTION: For best performance, it is recommended that the speakers be angled toward the listening position. This means that special attention must b e paid when mounting the brackets. If you have chosen to mount a pair of speakers with the tweeters on the inside, mount the bracket with the thin fl ...
-
Vienna Acoustics 101267 - page 9
...
-
Vienna Acoustics 101267 - page 10
To attach the speaker to the wall - mounting device: ATTENTION: As both WEBERN or BERG are symmetrical in driv er orientation (having not top or bottom) selecting an orientation position for the speakers so that the tweeters face in or out, as well as up or down, can be done to suit the nature of each installation. It is recommended that experiment ...
-
Vienna Acoustics 101267 - page 11
attach t he speaker to the bracket by tightening completely the upper conical tipped bolt with the hexagonal tool (Allen wrench/ key). Please make sure that you use the same conically milled point on both, lower and upper, inlays. ATTENTION: For safety reasons it is recommended that all connection bolts be tightened every six months. B. Free - stan ...
-
Vienna Acoustics 101267 - page 12
4. Put the spacer bars on the two speakers, so that the holes (two in each bar and two in each speaker) for the two bolts match. 5. Put the attached bases on the spacer bars, so that now all holes (two in each spea ker, two in each spacer bar and two in each base) match. ATTENTION: The Vienna Acoustics logo on the base faces the front. 6. Now attac ...
-
Vienna Acoustics 101267 - page 13
...
-
Vienna Acoustics 101267 - page 14
ACCESS ORIES FOR WEBERN & BERG FREE STANDING BRACKET: BRACKET: 1 pc. SPACER BAR: 1 pc., for connection between the speaker and the bracket. BOLTS: 2 pcs. M6 x 45 mm HEXAGONAL TOOL (Allen wrench/key): 1 pc. for adjusting the bolts. BANANA PLUGS: 2 pcs., sil ver plated, short version for convenient connection of speaker cables. GLOVES: 2 pcs. for ...
-
Vienna Acoustics 101267 - page 15
BOLT: 2 pcs. for connecting the cabinet with the wall mounting bracket. PLASTIC SOCKETS: 2 pcs. to avoid scratches when inserting and adjusting bolts. BOLTS: 4 pcs. M6 x 20 mm for attaching the inlays to the cabinet. HEXAGONAL TOOL (Allen wrench/key): 2 pcs. for adjusting the screws and bolts. M ETAL WALL MOUNTING ANCHORS AND SCREWS (for mounting i ...
-
Vienna Acoustics 101267 - page 16
CABINETS To ensure the best possible appearance, the surface of the aluminium line is treated with the highest grade of a luminium processing. After being precisely machined and CNC milled, all aluminium parts are bead blasted and transparently anodized. To maximize internal volume, we profited from the stiffness of aluminium to realize a slim wall ...
-
Vienna Acoustics 101267 - page 17
CONNECTIONS All connections must be complete and secure, since poor contact between speaker cable and input connector can lead to degradat ion of sound quality. The speakers come with a set of two silver plated banana plugs in which the speaker wire is inserted and held in place by screwing down the insert post. For the aluminium line we use silver ...
-
Vienna Acoustics 101267 - page 18
CABLING We en courage and recommend the use of high quality speaker cables and believe them to be an important tool for the enthusiast in obtaining maximum enjoyment from their music reproduction system. High quality cabling is a significant tool in the fine - tuning of any audio system. As with any purchase, listen carefully and allow your ears to ...
-
Vienna Acoustics 101267 - page 19
It is important to listen carefully to the match of amplifier and loudspeaker to ensure that the com - bination works well sonically for you. Though rated amplifier wattage bears little correla - tion to either sound quality or drive capability, the user is cautioned that amplifiers of lower power ratings, more frequently than more powerful ampli - ...
-
Vienna Acoustics 101267 - page 20
MAINTENANCE Your speaker cabinets can be cleaned periodically with a soft, damp cloth. Do not use any chemical detergents. Should spots or stains appear, clear water can be used to gently remove them. Should the bass drivers become dusty, it is safe to use a soft brush to clean the woofers. ...
¿Tienes una pregunta acerca de Vienna Acoustics 101267?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Vienna Acoustics 101267, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Vienna Acoustics 101267 probablemente compartirá una forma de solucionarlo.