-
Canon 2530A004 - page 1
EF300mm f/4L IS USM Instruction ENG C OP Y ...
-
Canon 2530A004 - page 2
ENG-1 The Canon EF300mm f/4L IS USM lens is a high-performance telephoto zoom lens f or EOS cameras, and it is equipped with an Image Stabilizer . • "IS" stands for Image Stabiliz er . • "USM" stands for Ultr asonic Motor . Features 1. The Image Stabilizer giv es the equivalent effect of a shutter speed tw o stops faster*. T ...
-
Canon 2530A004 - page 3
ENG-2 a Safety Precautions a Safety Precautions • Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. • Do not point the lens or camera at the sun or photograph it. This is because the lens concentrates the sun? ...
-
Canon 2530A004 - page 4
ENG-3 Nomenc lature Built-in lens hood ( → 10) Filter mounting thread ( → 10) Focusing ring ( → 4) Focusing distance range selection switch ( → 5) Image stabilizer switch ( → 6) Image stabilizer mode selector switch ( → 6) Focus mode switch ( → 4) Distance scale ( → 5) Contacts ( → 4) Tripod mount ( → 9) Lens mount index ( → 4 ...
-
Canon 2530A004 - page 5
ENG-4 See your camera’ s instructions for details on mounting and detaching the lens. • After detaching the lens, place the lens with the rear end up to prev ent the lens surface and electrical contacts from getting scratched. • If the contacts get soiled, scratched, or hav e fingerpr ints on them, corrosion or faulty connections can result. ...
-
Canon 2530A004 - page 6
ENG-5 4. Infinity Compensation Mark To compensate for shifting of the infinity f ocus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the L mark is aligned with the distance indicator on the distance scale. F or accur ate manual focusing on subjects at infinity d ...
-
Canon 2530A004 - page 7
ENG-6 Y ou can use the image stabilizer in AF or MF mode. 5. Image Stabilizer Settings Select the stabilizer mode. • MODE 1: Corrects vibrations in all directions. It is mainly effectiv e for shooting still subjects. • MODE 2: It compensates for ver tical camera shake during f ollo wing shots in a horizontal direction, and compensates for horiz ...
-
Canon 2530A004 - page 8
ENG-7 6. Tips on Using the Image Stabilizer • In semi-darkened areas such as indoors or outdoors at night. • In locations where flash photograph y is prohibited, such as ar t museums and theater stages. • In situations where your f ooting is uncer tain. •I n situations where fast shutter settings cannot be used. • When panning subjects in ...
-
Canon 2530A004 - page 9
ENG-8 Tips on Using the Image Stabilizer • The Image Stabilizer cannot compensate f or a b lurred shot caused b y a subject that moved. • Set the ST ABILIZER s witch when you are using a tripod. If the Stabilizer s witch is set to , the image stabilizer function ma y introduce errors. • Set the ST ABILIZER switch to when y ou are taking pictu ...
-
Canon 2530A004 - page 10
ENG-9 7. Using the T ripod Mount Adjusting the Rev olving Mount Y ou can loosen the orientation lock-knob on the tripod mount to allow it to rotate as needed to fit a par ticular camera model for s witching between v er tical and hor izontal positions. Detaching Use the follo wing procedures to remov e and attach the tripod mount. Loosen the orient ...
-
Canon 2530A004 - page 11
ENG-10 Y ou can attach filters to the filter mounting thread on the front of the lens. 9. Filters (Sold separately) • If you need a polarizing filter , use the Canon Circular P olarizing Filter (77mm). •T o adjust the polarizing filter, first store the lens hood. 8. Hood The built-in lens hood can reduce unw anted reflections and also protects ...
-
Canon 2530A004 - page 12
ENG-11 Y ou can attach Extension T ube EF12 II or EF25 II for magnified shots . The shooting distance and magnification are shown below . 10. Extension T ubes (Sold separately) Manual f ocusing is recommended for accurate f ocusing. Camera-to-Subject Magnification Distance (mm) Near F ar Near F ar EF12 II 1338 7795 0.30 × 0.04 × EF25 II 1216 3946 ...
-
Canon 2530A004 - page 13
ENG-12 • First attach the Extender to the lens, then attach the lens to the camera. Detach it from the camera in the re verse order . If you attach the lens to the camera first, misoperation may occur . • With Extender EF2X II attached to the lens, only manual f ocus is possible. Howe ver , with the EOS- 1Ds Mark III, EOS-1Ds Mark ll, EOS-1Ds, ...
-
Canon 2530A004 - page 14
ENG-13 Specifications Focal Length & Max. Aperture 300 mm, f/4 Lens Construction 15 elements in 11 groups Min. Aperture f/32 Angle of View Diagonal: 8°15’ V er tical: 4°35’ Horizontal: 6°50’ Min. Focusing Distance 1.5 m / 4.9 ft. Max. Magnification & Field of view 0.24 × , 101 × 150 mm / 4.0 × 5.9 inch ( at 1.5 m ) Filter Diamet ...
-
Canon 2530A004 - page 15
© CANON INC. 2002 CT1-8505-004 0812Ni C OP Y ...
¿Tienes una pregunta acerca de Canon 2530A004?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Canon 2530A004, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Canon 2530A004 probablemente compartirá una forma de solucionarlo.