-
ProForm DTL32950 - page 1
Serial Number Decal Model No. DTL32950 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL QUESTIONS? If you have questions, or if there are missing or damaged parts, we will guarantee complete sat - isfaction through direct assis- tance fro ...
-
ProForm DTL32950 - page 2
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . ...
-
ProForm DTL32950 - page 3
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that bl ...
-
ProForm DTL32950 - page 4
4 21. When folding or moving the treadmill, make sure that the storage latch is fully closed. 22. Inspect and properly tighten all parts of the treadmill regularly. 23. Never insert any object into any opening. 24. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and ad ...
-
ProForm DTL32950 - page 5
5 Thank you for selecting the new PROFORM ® CROSS - WALK PERFORMANCE X treadmill. The CROSSWALK PERFORMANCE X treadmill combines advanced tech- nology with innovative design to help you get the most from your exercise in the convenience of your home. And when you’re not exercising, the CROSSWALK PERFORMANCE X treadmill can be folded up, requirin ...
-
ProForm DTL32950 - page 6
6 ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top ...
-
ProForm DTL32950 - page 7
7 2. With the help of another person, carefully lower the Uprights (69) as shown. Note: It may be helpful to place one foot on one of the Extension Legs (63) as you tip the Uprights. Make sure that the Extension Legs remain in the Uprights. Attach each Extension Leg (63) with two 1” Tek Screws (39) and a Round Base Pad (57) as shown. Attach the l ...
-
ProForm DTL32950 - page 8
8 Small Hole 71 6. Hold the Console Base (47) near the Left Handrail (71). Attach the end of the ground wire on the Console Base to the indicated small hole in the Left Handrail with the Silver Ground Screw (75). 47 75 Ground Wire 42 7. Touch the Right Handrail (72) to discharge any static. Press the end of the Upright Wire (42) into the socket in ...
-
ProForm DTL32950 - page 9
9 11. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill. 10. Attach the Storage Latch (29) and ...
-
ProForm DTL32950 - page 10
10 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear. HO ...
-
ProForm DTL32950 - page 11
1 1 STEP-BY-STEP CONSOLE OPERATION Before operating the console, make sure that the power cord is properly plugged in (see page 10). The reset/off circuit breaker, located on the treadmill frame near the power cord, should be in the reset position. Next, stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing ab ...
-
ProForm DTL32950 - page 12
12 To stop the walking belt, press the Stop button. The Time/Distance display will begin to flash. Note: During the first few minutes that the treadmill is used, inspect the alignment of the walking belt, and align it if necessary (see page 16). Change the incline of the treadmill as desired. To change the incline of the treadmill, press either of ...
-
ProForm DTL32950 - page 13
13 HOW TO USE THE UPPER BODY ARMS As you walk on the treadmill, you can either hold the handrails or use the upper body arms. To exercise your arms, shoulders, and back for a total body workout, move the upper body arms forward and back as you walk on the treadmill. To vary the intensity of your upper body exercise, the resistance of the upper body ...
-
ProForm DTL32950 - page 14
14 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold ...
-
ProForm DTL32950 - page 15
15 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Press the storage latch to the left. Pivot the treadmill down until the frame and foot rail are past the storage latch. 2. Hold the treadmill firmly with both hands, and lower the tread- mill to the floor. Do not drop the treadmill frame to the floor. ...
-
ProForm DTL32950 - page 16
16 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-888-533-1333, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The powe ...
-
ProForm DTL32950 - page 17
17 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD . Using the allen wrench, ...
-
ProForm DTL32950 - page 18
18 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with ...
-
ProForm DTL32950 - page 19
19 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then ...
-
ProForm DTL32950 - page 20
P ART LIST—Model No. DTL32950 R0804A Key No. Qty. Description Key No. Qty. Description Key No. Qty. Description 1 1 Hood 2 15 3/4” Screw 3 1 Motor Belt 4 1 Motor Tension Bolt 5 9 3/8” Washer 6 1 Motor Star Washer 7 1 Flywheel 8 1 Motor 9* 1 Motor Assembly 10 1 Reed Switch 11 1 Latch Warning Decal 12 2 Frame Spacer 13 5 Frame Pivot Nut/Motor N ...
-
ProForm DTL32950 - page 21
106 105 104 107 108 63 65 62 72 67 2 2 2 31 48 48 2 29 44 67 28 10 58 12 19 13 13 60 23 2 13 12 14 21 98 18 17 14 15 74 98 82 83 97 15 96 86 15 95 92 38 92 38 93 81 77 83 82 77 79 80 39 69 39 13 53 57 39 39 57 51 102 13 62 63 64 32 66 58 89 87 68 100 65 42 26 70 15 94 41 58 1 1 22 22 56 106 76 24 109 25 76 109 71 108 107 105 104 1 1 1 27 1 13 1 12 ...
-
ProForm DTL32950 - page 22
LIMITED W ARRANTY ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The motor is warranted for three (3) years after the date of purchase. Parts and labor are warranted for ninety (90) days after the date of purchase. This warranty extends only ...
¿Tienes una pregunta acerca de ProForm DTL32950?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con ProForm DTL32950, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con ProForm DTL32950 probablemente compartirá una forma de solucionarlo.