-
Nady Systems SRM-10X - page 1
SRM-10X 10-CHANNEL STEREO MIC/LINE MIXER OWNER’S MANUAL MIXER ...
-
Nady Systems SRM-10X - page 2
2 SRM-10X 10-Channel Stereo Mic/Line Mixer Congratulations on your choice of mixers — you have purchased one of the finest compact mixing consoles on the market today . This unit was developed using the expertise of professional sound engineers and working musicians. Y ou will find that your new NADY AUDIO SRM-10X has superior performance and gre ...
-
Nady Systems SRM-10X - page 3
W ARNING 3 IMPORT ANT SAFETY INSTRUCTIONS When using this electronic device, basic precautions should always be taken, including the following: 1. Read all instructions before using the product. 2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.). 3. This product sho ...
-
Nady Systems SRM-10X - page 4
FEA TURES 4 The SRM-10X is the ultimate value in compact professional stereo mic/line mixers. This high quality unit is perfect for home and project studios, live club main and monitor mixing, video post-production studios, remote broadcasting — in fact, anywhere superior performance, rugged reliability and ultra-versatility are needed in an audi ...
-
Nady Systems SRM-10X - page 5
5 INST ALLA TION T o ensure years of enjoyment from your NADY AUDIO SRM-10X mixing console, please read and understand this manual thoroughly before using the unit. 1. INSPECTION Y our NADY AUDIO SRM-10X was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using your unit, carefully exami ...
-
Nady Systems SRM-10X - page 6
CONTROLS AND CONNECTIONS 6 1. MONO INPUT SECTION (1) COMBINED MIC XLR / 1/4” LINE INPUT The Mic input is an electronically balanced XLR type designed to accept signals from any balanced low impedance (Low Z) microphone. T o accommodate condenser microphones, this input is also equipped with +48VDC phantom power globally switchable to all XLR inpu ...
-
Nady Systems SRM-10X - page 7
CONTROLS AND CONNECTIONS The best balance of S/N and dynamic range will be achieved if you adjust the TRIM control on each channel separately so that the Peak Indicator LED (9) for that channel lights occasionally . (4) LOW CUT FIL TER Use this Low-Cut (high-pass) filter (18 dB/octave, -3 dB at 75 Hz) for reducing floor rumble, popping, breathing n ...
-
Nady Systems SRM-10X - page 8
CONTROLS AND CONNECTIONS 8 2. STEREO INPUT SECTION (12) (18) (14) (13) (17) (16) (19) (15) (24) L (MONO) LINE INPUT On stereo input channels 3-6, the 1/4" line inputs are designed for stereo or mono line-level signals such as those from keyboards, drum machines, CD players, tape decks, or samplers. However , these inputs can also be used as st ...
-
Nady Systems SRM-10X - page 9
b. Main Mix Function and Operation (23) MONO OUTPUT (26) STEREO OUTPUTS (27) T APE INPUTS (28) REC OUTPUTS (40) MASTER MIX MONO CONTROL (41) MASTER MIX STEREO CONTROL (36) LED OUTPUT METER The mono sum signal of the Left and Right buses is sent to the Mono output which is controlled by the Mono fader (40) . The Stereo Outputs are Left (L) and Right ...
-
Nady Systems SRM-10X - page 10
c. Monitor Function and Operation (38) AUX TO METER AND CTRL R/PHONES (42) AFL SWITCH (22) CONTROL ROOM OUTPUT (21) PHONES OUTPUT (39) PHONES/CONTROL ROOM CONTROL Depressing the AUX TO METER AND CTRL R/PHONES button (38) allows the Aux Send output signal to be directly monitored by the Meter Display and the Control Room / Headphone outputs. This bu ...
-
Nady Systems SRM-10X - page 11
CONNECTIONS This NADY AUDIO console uses 4 dif ferent types of audio connectors for the various input/output connections: (1) XLR balanced; (2) 1/4" TRS phone jacks for balanced, unbalanced, stereo, or in/out inserts; (3) 1/4" TRS unbalanced; (4) RCA pin unbalanced 1 2 3 2 1 3 Figures 1. Balanced XLR input/output connections 2. Stereo hea ...
-
Nady Systems SRM-10X - page 12
SPECIFICA TIONS 3. FREQUENCY RESPONSE ANY INPUT TO ANY OUTPUT ........................................20Hz ~ 20kHz +/-3 dB 4. TOT AL HARMONIC DISTORTION ANY INPUT TO ANY OUTPUT ..................................................................0.08% 5. INPUT CHANNEL EQUALIZA TION High ........................................12k, +/-15 dB, Q fixed at ...
-
Nady Systems SRM-10X - page 13
BLOCK DIAGRAM 13 L R L R AU X LP F L RP F L _ + Channels 1 - 2 Channels 3/4 - 5/6 Channels 7/8 - 9/10 AUX to Meter Display (switch) and CTRL R / PHONES AFL (switch) Stereo or Mono R L R L R L BAL AUX SEND CTRL R / PHONES Left Mono Line Input AUX Return Left Stereo Out Left Stereo Out Right Right AUX Return Right Head Phone AUX Send AUX GAIN Control ...
-
Nady Systems SRM-10X - page 14
NOTES 14 ...
-
Nady Systems SRM-10X - page 15
ONE YEAR LIMITED WARRANTY Nady Systems, Inc. warrants to the original consumer purchaser that the unit is free from any defects in material or workman- ship for a period of one year from the date of original retail purchase. If any such defect is discovered within the warranty period, NadySystems, Inc. will repair or replace the unit free of cha ...
-
Nady Systems SRM-10X - page 16
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET , EMERYVILLE, CA 94608 T el: 510.652.241 1 • Fax: 510.652.5075 • www .nady .com SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-241 1, or e-mail at service@nady .com. (International) For ...
¿Tienes una pregunta acerca de Nady Systems SRM-10X?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Nady Systems SRM-10X, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Nady Systems SRM-10X probablemente compartirá una forma de solucionarlo.