-
Aiwa XR-EM200 - page 1
Micro Hi-Fi Component System 4-247-475-21 030108AMI-H-B XR-EM200 ...
-
Aiwa XR-EM200 - page 2
2 W ARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only . Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This appliance is classified as a CLASS 1 LASER product. This label is loc ...
-
Aiwa XR-EM200 - page 3
3 On heat buildup • Although the unit heats up during operation, this is not malfunction. • Place the unit in a location with adequate ventilation to prevent heat build-up in the unit. If you continuously use this unit at a large volume, the cabinet temperature of the top, side and bottom rises considerable. To avoid burning yourself, do no tou ...
-
Aiwa XR-EM200 - page 4
4 Remote commander Detach the battery compartment lid at the rear of the remote commander and insert two R6 (size AA) batteries with correct polarity . R6(AA) • Replace the batteries with new ones when the operational distance between the remote commander and main unit becomes shorter . • Remove the batteries if the unit is not going to be used ...
-
Aiwa XR-EM200 - page 5
5 PA RTS AND CONTROLS Main unit: front Refer to the pages indicated in parentheses for details. 1 2 6 5 4 7 3 8 1 POWER 6 ST ANDBY/ON (7) Switches the unit on and off (standby). 2 ECO (7) Sets the ECO mode on or off. SYNCHRO REC (13) Starts recording and CD play simultaneously . REC ST ART/REC P AUSE (13) Starts and pauses recording. DISPLA Y (8) C ...
-
Aiwa XR-EM200 - page 6
6 Remote commander Refer to the pages indicated in parentheses for details. 1 4 5 6 7 9 8 ! @ # 0 2 3 Buttons with the same or similar names on the main unit basically have the same function. 1 POWER (7) 2 1–10/0, >10 (8-10) CD: selects a track of the specified number . T uner: tunes in the station with the specified preset number . The number ...
-
Aiwa XR-EM200 - page 7
7 ADJUSTMENTS BEFORE OPERA TION ECO CLOCK POWER DIMMER SHIFT E CD , TUNER/ BAND , d TA PE, AU X f , g POWER 6 ST ANDBY/ON E CD , TUNER/ BAND , c T APE, AU X ENTER f , g ECO mode Reduces power consumption in standby mode with the following operations. Press ECO. Each press of the button changes the mode as follows; ECO ON: Power economizing mode is ...
-
Aiwa XR-EM200 - page 8
8 This unit plays back finalized CD-R/RW discs as well as audio CDs. Playing a CD 1 Press OPEN to open the disc compartment. Place a disc with the label side up. Then close the disc compartment by pressing OPEN. 2 Press E CD to start play . To stop play Press s . To pause play Press E CD. Press again to resume play . CD OPERA TIONS To select a trac ...
-
Aiwa XR-EM200 - page 9
9 Programmed play Plays back up to 30 selected tracks in programmed order . 1 In stop mode, press SHUFFLE/PROGRAM on the remote repeatedly so that " PRGM " indicator is displayed. 2 Press the numbered buttons on the remote to program a track. -T o select the 15th track, press >10, 1 and 5. -T o select the 20th track, press >10, 2 an ...
-
Aiwa XR-EM200 - page 10
10 TUNER OPERA TIONS Manual tuning 1 Press TUNER/BAND repeatedly to select a band. The unit switches to the tuner from any other function and alternates between FM and AM. 2 Press f or g repeatedly to tune in a station. " TUNE " is displayed when a station is tuned in. " 1 " is displayed for FM stereo reception. To search for a ...
-
Aiwa XR-EM200 - page 11
11 SOUND ADJUSTMENTS V olume Tu rn VOLUME (press VOLUME + , - on the remote). Adjust from 0 (minimum) to 26 and MAX (maximum). Muting Press MUTING on the remote. Playback continues without sound and " MUTING " appears in the display . VO L UME T ONE TREBLE, BASS VO L UME + , - MUTING f , g f , g Adjustments To switch to monaural FM recept ...
-
Aiwa XR-EM200 - page 12
12 T APE PLA YBACK Playback Use only type I (normal) tapes. 1 Press z PUSH EJECT to open the cassette holder . 2 Insert the tape. Insert with the exposed side down, and press z PUSH EJECT to close the cassette holder . 3 Press c T APE (REC MUTING) ( d T APE on the remote) to start play . To stop playback Press s . To rewind or fast forward Press f ...
-
Aiwa XR-EM200 - page 13
13 To record radio programs and external equipment Use only type I (normal) tapes. 1 Press z PUSH EJECT to open the cassette holder . 2 Insert the recordable tape. 3 Prepare the source. T o r ecor d radio pr ograms, press TUNER/BAND and tune in the desired station. T o r ecor d from connected exter nal equipment, press AUX and prepare the equipment ...
-
Aiwa XR-EM200 - page 14
14 TIMER OPERA TIONS Sleep timer Tu rn s of f the unit automatically after a specified time. Press SLEEP on the remote. " SLEEP " flashes in the display . With each press, the timer duration changes as follows: AUTO 10 MIN...70 MIN OFF 90 MIN 80 MIN If you set to " AUTO ", the unit turns off automatically when the current CD or ...
-
Aiwa XR-EM200 - page 15
15 Ti mer recording Timer recording is available only for TUNER sources. 1 Hold down SHIFT and press TIMER on the remote repeatedly so that " 5 " and " REC " are displayed. 2 Within 6 seconds, press ENTER. " ON TIME " is displayed. 3 Press f or g to set the timer start hour , and press ENTER. 4 Press f or g to set the ...
-
Aiwa XR-EM200 - page 16
16 Care and maintenance Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. To clean the cabinet Use a soft and dry cloth. If the unit surfaces are extremely dirty , use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as alcohol, benzine or th ...
-
Aiwa XR-EM200 - page 17
17 Resetting the unit If an unusual condition occurs in the display window or the cassette deck, reset the unit as follows: 1P ress POWER to turn off the power . If the power cannot be turned off, disconnect the AC power cord, then plug it in again. 2 Hold down s and press POWER on the main unit. Everything stored in memor y after purchase is clear ...
-
Aiwa XR-EM200 - page 18
18 Specifications MAIN UNIT CX-LEM200 TUNER FM tuning range 87.5 MHz to 108 MHz FM usable sensitivity (IHF) 16.8 dBf FM antenna terminal 75 ohms (unbalanced) MW tuning range 531 kHz to 1602 kHz AM usable sensitivity 350 µV/m AM antenna Loop antenna AMPLIFIER Power output Rated: 8 W + 8 W(6 Ω , T .H.D. 1 %, 1 kHz/DIN 45500) Reference: 10 W + 10 W ...
-
Aiwa XR-EM200 - page 19
Sony Corporation Printed in China http://www .aiwa.com ...
¿Tienes una pregunta acerca de Aiwa XR-EM200?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Aiwa XR-EM200, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Aiwa XR-EM200 probablemente compartirá una forma de solucionarlo.