-
Roberts Radio CR9933 - page 1
CR9933 Dual Alarm Clock Radio with Nightlight Please read this manual before use ROBER TS Sound for Generations ...
-
Roberts Radio CR9933 - page 2
Contents Contents .................................................................................................................................................................................. 1 Controls ....................................................................................................................... ...................... ...
-
Roberts Radio CR9933 - page 3
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 2 Night Light Time Off On Alarm Set Snooze Sleep Controls 4 (Front) 2 1. Alarm 2 indicator 2. Alarm 1 indicator 3. Dial pointer 4. Time display 5. On button 1 10 6. Time reverse button 7. Time forward button 8. Night light button 9. Time fast forward bu ...
-
Roberts Radio CR9933 - page 4
Tuning 3 16 Controls 18 19 19. Volume control 20. Battery back-up compartment (underside) 21. Loud Speaker (Right side) 21 20 (Left side) 17 16. Headphone socket 17. Loud Speaker 18. Tuning control ...
-
Roberts Radio CR9933 - page 5
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 4 22. Waveband selector switch 23. Alarm 1 selector switch 24. Alarm 2 selector switch 22 23 24 (Back) Controls ...
-
Roberts Radio CR9933 - page 6
Time Switching on and setting the time Before using your clock radio you must first set the correct time. 1. Place the unit on a flat surface. Plug the mains lead into a wall socket and switch on. 2. The clock display will flash 00.00. 3. Press and hold down the Time Set button . 4. Whilst holding down the Time Set button press the Fast forward , S ...
-
Roberts Radio CR9933 - page 7
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) MW FM 6 Tuning On Listening to the radio 1. Switch on the radio by pressing the On button . 2. Select the required waveband using the Waveband selector switch . 3. Tune in to the desired station by rotating the Tuning control . The station frequency is ...
-
Roberts Radio CR9933 - page 8
Alarm Set Setting alarm times The alarms can be set to wake you by either the buzzer or the radio. Your alarm clock radio has 2 separate alarms which can be set to activate at different times. Setting alarm 1 1. Slide the Alarm 1 selector switch to the preferred buzzer or radio position. Ensure that the Alarm 2 selector switch is Off. 2. Press and ...
-
Roberts Radio CR9933 - page 9
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Alarm Set 8 Setting alarm 2 1. Slide the Alarm 2 function switch to the preferred buzzer or radio position. Ensure that the Alarm 1 selector switch is on Off while setting Alarm 2 but remember to switch Alarm 1 back to buzzer/radio after setting alarm 2 ...
-
Roberts Radio CR9933 - page 10
Alarm Set Alarm Set 9 Checking the alarm times 1. To check the time set on alarm 1, set the Alarm 1 selector switch to the buzzer or radio position. Ensure that the Alarm 2 selector switch is off while checking alarm 1 but remember to reset the alarm 2 selector switch back to buzzer/radio after the check has been completed. 2. Press the Alarm Set b ...
-
Roberts Radio CR9933 - page 11
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Off Off 10 Setting the alarms to wake to buzzer 1. Set the alarm time as previously described. Set the appropriate Alarm selector switch to the 'Buzzer' position. The corresponding Alarm indicators will light. 2. The buzzer alarm will sound ev ...
-
Roberts Radio CR9933 - page 12
11 Snooze control 1. The radio or buzzer alarm can be silenced for 7 minutes by pressing the Snooze button. This sequence can be repeated whilst the alarm is sounding. Sleep timer The radio can be set to switch off after a preset time has elapsed. 1. Press and hold down the Sleep button until the desired time is reached (maximum 59 minutes in 1 min ...
-
Roberts Radio CR9933 - page 13
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 12 Headphone socket (on left hand side) A Headphone Socket (3.5mm) is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the loudspeaker. Dimmer switch The Dimmer switch located on the underside of your clock ra ...
-
Roberts Radio CR9933 - page 14
13 Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug (BS1363). If another type of plug is used a 5A fuse should be fitted in the plug, adaptor or distribution board. IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN. Back-up battery (not necessary for the unit to function) Slide the battery cover catch in the direction of the ar ...
-
Roberts Radio CR9933 - page 15
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) The Company reserves the right to amend the specification without notice. Specifications Power Requirements Mains AC 230 volts, 50Hz only Back-up Battery IEC size 6F22/06PP (6LR61, PP3) Frequency Coverage FM 87.5 - 108MHz M W 540 - 1600 kHz Circuit feat ...
-
Roberts Radio CR9933 - page 16
ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1 Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below. Should ...
¿Tienes una pregunta acerca de Roberts Radio CR9933?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Roberts Radio CR9933, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Roberts Radio CR9933 probablemente compartirá una forma de solucionarlo.