-
hussman FMSS-L - page 1
FMSS-L CASE-FRONT SELF SERVICE REFRIGERA TED MERCHANDISER P/N IGSS-FMSS-L-0508 INST ALLA TION & OPERA TION GUIDE /CHINO FMSS-L CASE-FRONT SELF SERVICE REV . 0508 Installation & Operation Manual ...
-
hussman FMSS-L - page 2
IGSS-FMSS-L-0508 2 /CHINO A publication of HUSSMANN ® Chino 13770 Ramona Avenue • Chino, California 91710 (909) 628-8942 F AX (909) 590-4910 (800) 395-9229 Keep this booklet with the case at all times for future reference. General Instructions T able of Contents General Instructions..................................................... 2 Cut and ...
-
hussman FMSS-L - page 3
Rev . 0508 3 Cut and Plan Views FMSS F ront-Mount Self-Ser vice case. Can be ordered to mount in front of ANY service case. Base height can be modified to match any service case bumper height. ASC PARENT CASE FMSS Height Modified to match the ASC case 20" “Field” Close Off FMSS-L Self-Service Remote (Self Contained) Scale = 1" 16&apos ...
-
hussman FMSS-L - page 4
IGSS-FMSS-L-0508 4 NOTE: A. T o avoid removing concrete ooring, begin lineup leveling from the highest point of the store oor . B. When wedges are involved in a lineup, set them rst. All cases were leveled and joined prior to shipment to insure the closest possible t when cases are joined in the eld. When joining, use a carpenters le ...
-
hussman FMSS-L - page 5
Rev . 0508 5 Plumbing W aste Outlet and P-TRAP The waste outlet is located at the left hand end of these xtures allowing drip piping to be run under the xture lengthwise. A 1” P-TRAP and threaded adapter are supplied with each x ture . The P-T RAP mus t be ins tall ed to prev ent air lea kage and insect entrance into the xture. Instal ...
-
hussman FMSS-L - page 6
IGSS-FMSS-L-0508 6 Thermostatic Expansion V alve Location This device is located on the same side as the refrigera tion stub. An Alco balanced port expansion valve model is furnished as standard equipment, unless otherwise specied by customer . Expansion V alve Adjustment Expansion valves must be adjusted to fully feed the evaporator . Before at ...
-
hussman FMSS-L - page 7
Rev . 0508 7 Electrical Wiring Color Code CASE MUST BE GROUNDED NOTE: Refer to label afxed to case to determine the actual conguration as checked in the “TYPE INST ALLED” boxes. Electrical Circuit Identication Sta ndar d lig hting for all mode ls wi ll be full len gth uor escen t lamps located on the front of the parent case. The sw ...
-
hussman FMSS-L - page 8
IGSS-FMSS-L-0508 8 8. Avoid the use of supplemental ood or spot lighting. Display light intensity has been designed for maximum visibility and product life at the factory . The use of higher output uorescent lamps (H.O. and V .H.O.), will shorten the shelf life of the product. Important Steps 1. Do not set temperature too cold, as this causes ...
-
hussman FMSS-L - page 9
Rev . 0508 9 Maintenance BEFORE SERVICING ALWAYS DISCONNECT ELECTRICAL POWER AT THE MAIN DISCONNECT WHEN SERVICING OR REPLACING ANY ELECTRICAL COMPONENT. This includes (but not limited to) Fans, Heaters Thermostats, and Lights. Replacing Fluorescent Lamps Fluorescent lamps are furnished with moisture resistant lam p holde rs, shield s and end caps. ...
-
hussman FMSS-L - page 10
IGSS-FMSS-L-0508 10 Wiring Diagrams DATE: PROJECT TIT LE: DRAWING #: DRAW N BY: PRODUCTION ORDER #: DRAW ING TIT LE: DATE: Hussmann Corporation, Int'l. 13770 Ramona Avenue Chino, CA. 91710 (909)-590-4910 Lic.#: 644406 REVISIONS: #: DESCRIPTION: CHECKED BY: BY: FILE LOCATION: M. KIMURA PAGE OF 1 1 05/12/04 A (2) 125-01-3234A was (1) 125-01-0493 ...
-
hussman FMSS-L - page 11
Rev . 0508 1 1 Wiring Diagrams (Cont'd) DATE: PROJEC T T ITLE: DRAWIN G #: DRAWN BY: PRODUC TION ORDER #: DRAWING TIT LE: DATE: Hussmann Corporation, Int'l. 13770 Ramona A venue Chino, CA. 91710 (909)-590-4910 Lic.#: 644406 REVISIONS: #: DESCRI PTION: CHECKED BY: BY: FILE LOCATION : D.QUAN PAGE OF 1 1 03/17/05 1 2 3 FMSS-L/M CASES W140000 ...
-
hussman FMSS-L - page 12
IGSS-FMSS-L-0508 12 DATE: PROJEC T T ITLE: DRAWIN G #: DRAWN BY: PRODUC TION ORDER #: DRAWING TIT LE: DATE: Hussmann Corporation, Int'l. 13770 Ramona A venue Chino, CA. 91710 (909)-590-4910 Lic.#: 644406 REVISIONS: #: DESCRI PTION: CHECKED BY: BY: FILE LOCATION : D.QUAN PAGE OF 1 1 02/24/06 1 2 3 FMSS-L/M CASES W1400015 10' CASE - ELECTRI ...
-
hussman FMSS-L - page 13
Rev . 0508 13 Wiring Diagrams (Cont'd) DATE: PROJEC T T ITLE: DRAWIN G #: DRAWN BY: PRODUC TION ORDER #: DRAWING TIT LE: DATE: Hussmann Corporation, Int'l. 13770 Ramona A venue Chino, CA. 91710 (909)-590-4910 Lic.#: 644406 REVISIONS: #: DESCRI PTION: CHECKED BY: BY: FILE LOCATION : D.QUAN PAGE OF 1 1 09/07/04 1 2 3 FMSS-L/M CASES W1400012 ...
-
hussman FMSS-L - page 14
IGSS-FMSS-L-0508 14 DATE: PROJEC T T ITLE: DRAWIN G #: DRAWN BY: PRODUC TION ORDER #: DRAWING TIT LE: DATE: Hussmann Corporation, Int'l. 13770 Ramona A venue Chino, CA. 91710 (909)-590-4910 Lic.#: 644406 REVISIONS: #: DESCRI PTION: CHECKED BY: BY: FILE LOCATION : D.QUAN PAGE OF 1 1 05/16/06 1 2 3 FMSS-L/M CASES W1400016 12' CASE - ELECTRI ...
-
hussman FMSS-L - page 15
Rev . 0508 15 Wiring Diagrams (Cont'd) DATE: PROJECT TIT LE: DRAW ING #: DRAW N BY: PRODUCTION ORDER #: DRAW ING TIT LE: DATE: Hussmann Corporation, Int'l. 13770 Ramona Avenue Chino, CA. 91710 (909)-590-4910 Lic.#: 644406 REVISIONS: #: DESCRIPTION: CHECKED BY: BY: FILE LOCATION: JESSE RIOS PAGE OF 1 1 6/19/07 FMSS-L CASE W 1400017 4' ...
-
hussman FMSS-L - page 16
IGSS-FMSS-L-0508 16 DATE: PROJECT TIT LE: DW G #: DRAW N BY: PRODUCTION ORDER #: DRAW ING T ITLE: DATE: REVISIONS: : Y B D E K C E H C : N O I T P I R C S E D : # BY: FILE LOCATION: ADRIAN E. CRISCI AEC PAGE OF HUSSMANN ® CORPORATION 13770 RAMONA AVE NUE CHINO, CA.91710 (909) 590-4910 LIC.#: 644406 1 2 3 1 1 11/07/02 H:W IRESCHEMATICSNEW -W IRIN ...
-
hussman FMSS-L - page 17
Rev . 0508 17 Appendices Appendix A. - T emperature Guidelines The refrigerators should be operated according to the manufacturer ’s published engineering specications for en teri ng air tem per atur es for sp eci c equi pme nt appl ica tion s. T able 1 shows the typical temperature of the air entering the food zone one hour before the star ...
-
hussman FMSS-L - page 18
IGSS-FMSS-L-0508 18 1.1 The following recommendations are made for the purpose of arriving at easily taken and understood data which, coupled with other observations, may be used to determine whether a display refrigerator is working as intended: a) INSTRUMENT - A stainless steel stem-type thermometer is recommended and it should have a dial a mini ...
-
hussman FMSS-L - page 19
Rev . 0508 19 1.1 Cleaning of non frozen food equipment should include a weekly cleaning of the food compartment as a minimum to prevent bacteria growth from accumulating. Actual use and products may dictate more frequent cleaning. Circumstances of use and equipment design must also dictate the frequency of cleaning the display areas. Weekly washin ...
-
hussman FMSS-L - page 20
The MODE L NAM E and SERI AL NU MBER is requ ired in ord er to prov ide you with the correct parts and information for your particular unit. They can be found on a small metal plate on the unit. Please note them below for future reference. MODEL: SERIAL NUMBER: /Chino Additional copies of this publication may be obtained by contacting: Hussmann® C ...
¿Tienes una pregunta acerca de hussman FMSS-L?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con hussman FMSS-L, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con hussman FMSS-L probablemente compartirá una forma de solucionarlo.