-
Life Fitness Parabody 663 - page 1
1 663 660 SECOND ST ACK OPTION CLASS H PAR T # 7050101 REV . C Revision: 07/31/01 USER’S GUIDE W ARNING: Read and follow all directions for each step to insure proper assembly of this product. V ersion: 663101 ...
-
Life Fitness Parabody 663 - page 2
THERE IS A RISK ASSU MED BY IND IVIDUALS W H O USE THIS TY PE OF EQUIPMENT. TO MINIMIZE RISK F OLLOW THE SE RULES ! 1. Before u sing, read al l the w arnings and in structions on the use of this mach ine. Use only for in tended exercise. DO NOT mo dify the m achine. 2. Obtain a medica l exam bef ore begi nning any exercise pro gram. 3. Keep body a ...
-
Life Fitness Parabody 663 - page 3
IMPOR T ANT NOTES Please note: T ools Required for Assembly * Thank you for purchasing the ParaBody 663 660 Second Stack Option. Please read these instructions thoroughly and keep them for future reference. 3 NOTE: BOL T LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOL T . BOL T LENGTH RULER: * This product must be assembled on a flat, ...
-
Life Fitness Parabody 663 - page 4
STEP 2 FIGURE 2 FIGURE 1 STEP 1 • REMOVE the four 3/8” X 1” BUTTON HEAD CAP SCREWS from the top of the front SHROUD & rear SHROUD. See FIGURE 1. 3/8” X 1” BUTTON HEAD CAP SCREW PA R T # 6523401 7095701 7012102 6957302 7032302 31 16101 6972201 3108002 31 17401 KEY 1 2 3 4 5 6 7 8 9 QTY 2 1 2 1 1 1 1 2 4 PA R T # 6978101 3102909 6480301 ...
-
Life Fitness Parabody 663 - page 5
STEP 3 FIGURE 3 5 • Unscrew the threaded ends of the HEAD PLA TE CABLE from the WEIGHT ST ACK SHAFT & the D-RING and remove HEAD PLA TE CABLE. The HEAD PLA TE CABLE will be used later . See FIGURE 3. (NOTE: Remove pulleys for ease of removal.) HEAD PLA TE CABLE (7041801) D-RING 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 ...
-
Life Fitness Parabody 663 - page 6
6 PRESS CABLE (67249) STEP 4 • Remove the PRESS CABLE (67249) from the KEYHOLE CLEVIS and ELASTIC CORD. (NOTE: The LA T or LEG EXT CABLE can be moved over one hole on the D-RING so the KEYHOLE CLEVIS are evenly spaced .) FIGURE 4 ELASTIC CORD D-RING KEYHOLE CLEVIS • Discard the KEYHOLE CLEVIS and ELASTIC CORD. FIGURE 5 STEP 5 • (NOTE: If the ...
-
Life Fitness Parabody 663 - page 7
7 STEP 6 FIGURE 6 • Assemble the previously removed 2” PULLEY to the bracket on the TOP BOOM using one 3/8 X 1” BOL T (1 1), one previously remov ed 3/8” W ASHER, and one previously removed 3/8” LOCK NUT . See FIGURE 6. • (NOTE: STEP 6 is only completed if the 100101 LEG PRESS OPTION is installed otherwise proceed to STEP 7.) • Assemb ...
-
Life Fitness Parabody 663 - page 8
FIGURE 8 STEP 8 • Discard the two 3/8 X 1/2” SP ACERS. • Remove two 2” PULLEYS to the rear bracket on the T OP BOOM using one 3/8” THREADED SHAFT , two 3/8” W ASHERS, two 3/8” HEX NUTS, and two 3/8” LOCK NUTS as shown in FIGURE 8. FIGURE 9 STEP 9 • Position the elastic cords over the 2” PULLEYS as shown in FIGURE 9. • SECUREL ...
-
Life Fitness Parabody 663 - page 9
STEP 10 • Carefully remove and discard the PRESS CABLE as shown in FIGURE 10. PRESS CABLE (67249) FIGURE 10 9 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 ...
-
Life Fitness Parabody 663 - page 10
10 STEP 1 1 • Route the new PRESS-ST ACK CABLE (5) around the pulleys and l-brackets as shown in STEP 11. (Remove pulleys for ease of installation.) 5 5 FIGURE 1 1 FIGURE 12 STEP 12 PRESS-ST ACK CABLE (7032302) PRESS-ST ACK CABLE (7032302) 5 PRESS- ST ACK CABLE (7032302) • T o assemble the PRESS-ST ACK CABLE (5) follow the cable routing as show ...
-
Life Fitness Parabody 663 - page 11
FIGURE 14 STEP 14 • LOOSEN the bolts holding the TOP BOOM to the UPRIGHTS. Bolts will have to be removed to install GUIDE RODS (1). See FIGURE 14. 11 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 LOOSEN! TOP BOOM LOOSEN! STEP 13 • Snap two WEIGHT PLA TE BUSHINGS (17) each, into the “ top” side of fifteen WEIGHT PLA TES (16) as shown in FIGURE 13. 16 ...
-
Life Fitness Parabody 663 - page 12
FIGURE 15 STEP 15 • Insert two GUIDE RODS (1) into the BASE as shown on FIGURE 15. (NOTE: Lubricate GUIDE RODS (1) with silicon or teflon spray available at most hardware stores.) • Slide two WEIGHT ST ACK SP ACERS (3), two 3/4” W ASHERS (15), and two WEIGHT ST ACK CUSHIONS (8) - IN THA T ORDER - down over the GUIDE RODS (1). • Using EXTREM ...
-
Life Fitness Parabody 663 - page 13
STEP 16 FIGURE 16 13 • W ith the GUIDE RODS (1) securely held in the T OP BOOM. Tighten all TOP BOOM connections. (NOTE: Make sur e the LA T CABLE runs over the top of the bolts in the TOP BOOM.) 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 TIGHTEN! ( NOTE: Make sure LA T CABLE runs over top of bolts in TOP BOOM.) 1 TIGHTEN! TOP BOOM • CAREFULL Y lift ...
-
Life Fitness Parabody 663 - page 14
14 HEAD PLA TE CABLE (7041801) STEP 17 FIGURE 17 • Screw one of the threaded ends of the previously removed HEAD PLA TE CABLE approximately 1” into the end of the WEIGHT ST ACK SHAFT . See FIGURE 17. WEIGHT ST ACK SHAFT STEP 18 • Screw the other threaded end of the HEAD PLA TE CABLE approximately 1” into the end of the shaft on the D-RING. ...
-
Life Fitness Parabody 663 - page 15
STEP 19 FIGURE 19 15 REAR SHROUD • The rear SHROUD opening must be removed. Apply pressure to the bottom of the SHROUD where the “V” groove is and carefuly remove the weight stack opening on the plastic SHROUD as shown in FIGURE 19. 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 ...
-
Life Fitness Parabody 663 - page 16
STEP 21 FIGURE 21 FIGURE 20 STEP 20 • SECUREL Y attach the four previously removed 3/8” X 1” BUTTON HEAD CAP SCREWS from the top of the front SHROUD & rear SHROUD. See FIGURE 20. 3/8” X 1” BUTTON HEAD CAP SCREW • SECUREL Y attach the four previously removed 3/8” X 1” BUTTON HEAD CAP SCREWS from the bottom of the front SHROUD &am ...
-
Life Fitness Parabody 663 - page 17
MAINTENANCE MODEL #________________________ SERIAL #_________________________ DA TE OF PURCHASE: _____________ DEALERS NAME: _________________ DEALERS PHONE #_______________ 17 * W e recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water . T ouch-up paint can be purchased from your ParaBody customer service repr ...
-
Life Fitness Parabody 663 - page 18
18 NOTES: LIMITED W ARRANTY ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The W arranty terms apply to IN HOME USE ONL Y . 1. LIMITED W ARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repair ed or replaced by ParaBody . T erms: Lifetime ? ...
-
Life Fitness Parabody 663 - page 19
INTERNA TIONAL OFFICES LifeFitnessAtlantic BV Atlantic Headquarters Bijdorpplein 25-31 2992 LB Barendrecht The Netherlands Phone: (180) 646 666 Fax: (180) 646 703 LifeFitness Japan 8/F , Nippon Brunswick Building 5-27-7 Sendagaya Shibuya-Ku, T okyo 151-0051 Japan Phone: 81 (3) 3359-4309 Fax: 81 (3) 3359-4307 LifeFitness (UK) Ltd. Queen Adelaide Ely ...
¿Tienes una pregunta acerca de Life Fitness Parabody 663?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Life Fitness Parabody 663, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Life Fitness Parabody 663 probablemente compartirá una forma de solucionarlo.