-
Lincoln Electric IM850-A - page 1
• Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com • World's Leader in Welding and Cutting Products • PO WER FEED 10S OPERA TOR’S MANUAL IM850-A April, 2005 Safety Depends on You Lincoln arc welding and cutting e ...
-
Lincoln Electric IM850-A - page 2
FOR ENGINE powered equipment. 1.a. Turn the engine off before troubleshooting and maintenance work unless the maintenance work requires it to be running. ____________________________________________________ 1.b. Operate engines in open, well-ventilated areas or vent the engine exhaust fumes outdoors. ________________________________________________ ...
-
Lincoln Electric IM850-A - page 3
ii SAFETY ii ARC RA YS can burn. 4.a. Use a shield with the proper filter and cover plates to protect your eyes from sparks and the rays of the arc when welding or observing open arc welding. Headshield and filter lens should conform to ANSI Z87. I standards. 4.b. Use suitable clothing made from durable flame-resistant material to protect your skin ...
-
Lincoln Electric IM850-A - page 4
FOR ELECTRICALL Y powered equipment. 8.a. Turn off input power using the disconnect switch at the fuse box before working on the equipment. 8.b. Install equipment in accordance with the U.S. National Electrical Code, all local codes and the manufacturer’s recommendations. 8.c. Ground the equipment in accordance with the U.S. National Electrical C ...
-
Lincoln Electric IM850-A - page 5
iv SAFETY iv Mar. ‘93 PRÉCAUTIONS DE SÛRETÉ Pour votre propre protection lire et observer toutes les instructions et les précautions de sûreté specifiques qui parraissent dans ce manuel aussi bien que les précautions de sûreté générales suiv- antes: Sûreté Pour Soudage A L’Arc 1. Protegez-vous contre la secousse électrique: a. Les ...
-
Lincoln Electric IM850-A - page 6
Thank You for selecting a QUALITY product by Lincoln Electric. We want you to take pride in operating this Lincoln Electric Company product ••• as much pride as we have in bringing this product to you! Read this Operators Manual completely before attempting to use this equipment. Save this manual and keep it handy for quick reference. Pay par ...
-
Lincoln Electric IM850-A - page 7
vi vi T ABLE OF CONTENTS Page Product Description .........................................................................................................................1 Recommended Processes .......................................................................................................... ....1 Process Limitations ...................... ...
-
Lincoln Electric IM850-A - page 8
1 PRODUCT DESCRIPTION POWER FEED 10S 1 PRODUCT SUMMAR Y The Power Feed 10S series of Automatic Wire Drives are designed for hard automation, submerged arc welding. The heavy-duty gearbox and feed plate have many years of proven reliability while a new perma- nent magnet motor has been added. The Power Feed 10S wire drives consist of a high torque m ...
-
Lincoln Electric IM850-A - page 9
2 GENERAL INFORMA TION POWER FEED 10S 2 DESIGN FEA TURES • Closed-loop speed control. • Knurled drive rolls. • Heavy cast aluminum gearbox housing and feed plate assembly. • Wire straightener. • 32Vdc permanent magnet, high torque motor. • Conversion kit included to change speed range. • Voltage sense leads included for precision weld ...
-
Lincoln Electric IM850-A - page 10
3 SPECIFICA TIONS POWER FEED 10S 3 TECHNICAL SPECIFICA TIONS - POWER FEED 10S PHYSICAL DIMENSIONS TEMPERA TURE RANGES Wire Feeders - Input V oltage and Current Voltage 32V DC HEIGHT 12.0 in. (305 mm) 12.0 in. (305 mm) 8.0 in. (203 mm) MODEL K2312-1 K2370-1 K2311-1 WIDTH 14.0in (355mm) 14.0in (355mm) 6.0in (152mm) DEPTH 10.0in (254mm) 10.0in (254mm) ...
-
Lincoln Electric IM850-A - page 11
A-1 INST ALLA TION POWER FEED 10S A-1 SAFETY PRECAUTIONS Read this entire installation section before you start installation. ELECTRIC SHOCK can kill. • Only qualified personnel should per- form this installation. • Turn the input power OFF at the dis- connect switch or fuse box before working on this equipment. Turn off the input power to any ...
-
Lincoln Electric IM850-A - page 12
A-2 INST ALLA TION POWER FEED 10S A-2 POWER W A VE AC/DC 1000AMP SUBARC SYSTEM CONNECTIONS (See Figure A.1) 1 - Work cable connection 3 - 14 pin wire feeder control cable 4 - 5 pin Arclink control cable to user interface 7 - Electrode cable connection MOUNTING DIMENSIONS The PF-10S can be mounted by using the four 3/8-16 tapped holes or the two 0.5 ...
-
Lincoln Electric IM850-A - page 13
A-3 INST ALLA TION POWER FEED 10S A-3 CHANGING WIRE DRIVE CONFIGURA TION The POWER FEED-10S Wire Drives can be reconfig- ured to fit in any hard automation application. The POWER FEED-10S Wire Drives can be reconfig- ured in such a way that the wire feed direction is reversed. If this is the case, the motor leads must be reversed so the wire will f ...
-
Lincoln Electric IM850-A - page 14
A-4 INST ALLA TION POWER FEED 10S A-4 ELECTRODE AND WORK CONNECTIONS Due to the Power Wave AC/DC ” s ability to produce either a DC positive, DC negative or AC output the elec- trode and work connections do not need to be reversed for the different polarities. Additionally no DIP switch changes are required to switch between the different polarit ...
-
Lincoln Electric IM850-A - page 15
A-5 INST ALLA TION POWER FEED 10S A-5 WELDING WITH MUL TIPLE ARCS Special care must be taken when more than one arc is welding simultaneously on a single part. Arc blow and arc interference may occur or be magnified. Each power source requires a work lead from the work stud to the welding fixture. Do not combine all of the work leads into one lead. ...
-
Lincoln Electric IM850-A - page 16
A-6 INST ALLA TION A-6 GEAR RA TIO CONVERSION KITS (SEE INSTRUCTIONS INCLUDED WITH CON- VERSION KIT) 1. Remove the 2 hex head screws and the 2 slot head screws holding the Motor to the Wire Drive Gearbox assembly. 2 . Remove existing Adapter Plate and Motor Assembly. 3. Take the two long screws removed in step 1 and screw one into each of the tappe ...
-
Lincoln Electric IM850-A - page 17
C-1 ACCESSORIES C-1 K231 1-1 MOTOR CONVERSION KIT (FOR 142:1 NA STYLE WIRE DRIVES)-- This conver- tion kit converts old NA style wire drives. 1. Remove the 2 hex head screws and the 2 slot head screws holding the Motor to the Wire Drive Gearbox assembly. 2. Remove existing Adapter Plate and Motor Assembly. 3. The Conversion Kit Motor is shipped con ...
-
Lincoln Electric IM850-A - page 18
D-1 MAINTENANCE D-1 POWER FEED 10S SAFETY PRECAUTIONS ELECTRIC SHOCK can kill. • Only Qualified personnel should perform this maintenance. • Turn the input power OFF at the disconnect switch or fuse box before working on this equipment. • Do not touch electrically hot parts. ROUTINE MAINTENANCE • Check weld cables, control cables and gas ho ...
-
Lincoln Electric IM850-A - page 19
E-1 TROUBLESHOOTING E-1 POWER FEED 10S If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed. CAUTION This Troubleshooting Guide is provided to help you locate and repair p ...
-
Lincoln Electric IM850-A - page 20
E-2 TROUBLESHOOTING E-2 POWER FEED 10S If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed. CAUTION Observe all Safety Guidelines detailed throughout this manual PROBLEMS ...
-
Lincoln Electric IM850-A - page 21
F-1 DIAGRAMS F-1 POWER FEED 10S B M20368 R P.M. U T A C H B 51 5 OUTPUT RECEPTACLE R U B 50 0 84 2 84 3 MOTOR/GEAR BOX 67 TAC H I NTE RFACE PC BD 5 8 N.A. 1 4 W WIRING DIAGRAM FOR POWER FEED 10S IRIN G D IAG RAM PO W ER FEE D 10 S 4 1 (J800) N.A. 8 5 (J801) 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 5 5 0 A 5 5 1 B C 2 1 A D E F G H 6 7 I 5 0 0 J 8 4 2 K L M ...
-
Lincoln Electric IM850-A - page 22
F-2 DIMENSION PRINT F-2 POWER FEED 10S L12119 A 4.25 6.16 2.43 5.19 3.50 .21 2.82 CENTERLIN E OF WIRE CENTERL INE OF W IRE 2.60 ISO VIEW (REF.ONLY) 2.50 .50 .50 O .562 (2 HOL ES) CENTERL INE OF WIRE CENTERL INE OF MOUNT ING BRACKET 4.26 6.16 11.29 3/ 8-16 TAPPED HOLES (4 PLACES) 7.70 .50 2.50 .62 2.69 .96 .41 9.82 4.70 13.56 ...
-
Lincoln Electric IM850-A - page 23
NOTES POWER FEED 10S ...
-
Lincoln Electric IM850-A - page 24
W ARNING A VISO DE PRECAUCION A TTENTION W ARNUNG A TEN ÇÃ O Spanish French German Portuguese Japanese Chinese Korean Arabic READ AND UNDERST AND THE MANUFACTURER’S INSTRUCTION FOR THIS EQUIPMENT AND THE CONSUMABLES TO BE USED AND FOLLOW YOUR EMPLOYER’S SAFETY PRACTICES. SE RECOMIENDA LEER Y ENTENDER LAS INSTRUCCIONES DEL F ABRICANTE P ARA EL ...
-
Lincoln Electric IM850-A - page 25
W ARNING A VISO DE PRECAUCION A TTENTION W ARNUNG A TEN ÇÃ O Spanish French German Portuguese Japanese Chinese Korean Arabic LEIA E COMPREENDA AS INSTRUÇÕES DO F ABRICANTE P ARA ESTE EQUIPAMENTO E AS P ARTES DE USO, E SIGA AS PRÁTICAS DE SEGURANÇA DO EMPREGADOR. ● Keep your head out of fumes. ● Use ventilation or exhaust to remove fumes f ...
-
Lincoln Electric IM850-A - page 26
• Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com • World's Leader in Welding and Cutting Products • ...
¿Tienes una pregunta acerca de Lincoln Electric IM850-A?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Lincoln Electric IM850-A, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Lincoln Electric IM850-A probablemente compartirá una forma de solucionarlo.