-
JVC TU-DB1SU - page 1
DIGIT AL TERRESTRIAL SET T OP BOX INSTRUCTIONS TU-DB1SU E NGLISH Trade Mark of the DVB Digital V ideo Broadcasting Project (1991 to 1996) Number: 3205 ...
-
JVC TU-DB1SU - page 2
- 1 - CONTENTS Safety Precautions 2 In the box 3 Over Air Download 3 STB buttons 4 Remote control buttons 5 Preparation 7 Connections 7 Switching on 8 Inithial settings 8 Everyday Operation 9 Changing Channels 9 Channel List 10 Electronic Programme Guide 10 Digital T eletext 1 1 Widescreen 12 Advanced Operation 12 Configuring Y our Receiver 1 2 Edi ...
-
JVC TU-DB1SU - page 3
- 2 - SAFETY PRECAUTIONS POWER Always use the provided AC adapter. Operate only from the power source specified (AC 100-240 V ,50/60Hz) on the AC adapter. In using, the AC adapter get heat on the surface of the case. It is normal, not defective. Do not be covered with any material on case of AC adapter while it is in operation. Leave the 15 cm spac ...
-
JVC TU-DB1SU - page 4
- 3 - IN THE BOX Thank you for buying this JVC Degital T errestrial Set T op Box. Inside your package you should have: Degital T errestrial Set T op Box (STB) receiver AC adaptor x1 Remote control unit: RM-C1890S Dry battery for the remote control unit AA (R06) x2 Instruction book Warranty Card Aerial cable x1 Scart cable x1 OVER AIR DOWNL OAD Over ...
-
JVC TU-DB1SU - page 5
- 4 - RECEIVER BUTTONS Front: ...
-
JVC TU-DB1SU - page 6
- 5 - REMOTE CONTROL BUTTONS ...
-
JVC TU-DB1SU - page 7
- 6 - REMOTE CONTROL BUTTONS T o operate this STB: Set the Slide Switch to STB position. For details of the use of each buttons, see each sections explanation. Note: V olume-/+ buttons and the Mute button work for the volume from the TV . T o operate a JVC brand TV or VCR: Set the Slide Switch to the TV/VCR position. Pressing a button that looks ...
-
JVC TU-DB1SU - page 8
- 7 - PREP A R A TION Connections Place your receiver on a firm, level surface with at least a 10cm gap around all sides of the case and in a position convenient for connection to your television, a mains power outlet and a TV aerial wall outlet (or the 'flying lead' from your TV aerial, as appropriate). Please refer to the Safety Precaut ...
-
JVC TU-DB1SU - page 9
- 8 - PREP A R A TION Switching on T urn on your TV set and select the SCART input (with the AV key , or similar, on the television remote control). Press the [ST ANDBY] key on the remote control handset. The power lamp change to green and the receiver's menu will be seen on the TV screen. If you do not see the receiver's menu on the tele ...
-
JVC TU-DB1SU - page 10
- 9 - If no digital terrestrial television broadcasts are found the receiver will display a message: Y ou should then refer to the Troubleshooting Guide on page 20 to establish the cause of the problem. When you have finished watching digital terrestrial broadcasting, you may wish to switch the receiver to standby to save power - although the recei ...
-
JVC TU-DB1SU - page 11
- 10 - Icons are also displayed in the information banner and if this channel is a favourite channel (see - ADV ANCED OPERA TION - Favourite Channels on page 15). favorite channel icon If the selected channel is locked (see - ADVANCED OPERA TION - Channel Protection on p age 14), you must enter the correct four digit code to view the channel. CHANN ...
-
JVC TU-DB1SU - page 12
- 11 - The channels are listed at theleft of the screen, each with the 'current event' (the name of the programme showing at that time) and the 'next events' (the following programmes). When the EPG screen is first displayed, the channel last watched is highlighted in the list of channels. Details of the selected programme on th ...
-
JVC TU-DB1SU - page 13
- 12 - WIDESCREEN TV sets are available with screens of the standard (4:3) format and widescreen (16:9) format. When you first installed your receiver you specified the format of the connected TV (this can now be altered if necessary; see Section 3 - ADV ANCED OPERA TION - Con figuring Y our Receiver). Digital terrestrial television broadcasts are ...
-
JVC TU-DB1SU - page 14
- 13 - SYSTEM Use LEFT/RIGHT buttons to toggle System Menu Language. Press OK on the preferred language. COUNTRY Use LEFT/RIGHT buttons to toggle Country options. Press OK on the preferred Country . Audio Language Digital terrestrial television channels can broadcast simultaneous soundtracks in more than one language. This function selects which la ...
-
JVC TU-DB1SU - page 15
- 14 - The Channel List screen displays the list of channels in the receiver's memory , with a quarter- screen image window showing the selected channel, and can be used to change channels for viewing, delete channels from the memory , edit the name of the channel as it appears in the list and on-screen, lock a channel against viewing by young ...
-
JVC TU-DB1SU - page 16
- 15 - Hint The PIN is factory set to 0000. This code should be reset (as described below) to another sequence of numbers, known only to you, when you have finished setting up the receiver. Y ou can now leave the Channel List screen and return to normal TV viewing by pressing [MENU]. Any attempt to change channel to the locked channel will now disp ...
-
JVC TU-DB1SU - page 17
- 16 - PROGRAMME REMINDERS Programme reminders can be set to signal that a programme is about to start when you are watching another channel. A reminder is set from the Electronic Programme Guide screen. Press the [GUIDE] key to display the EPG screen and press [RIGHT] to display the next programme details in the text window and highlight the name ...
-
JVC TU-DB1SU - page 18
- 17 - INST ALLATION Although your receiver will not lose its settings or stored channels when switched off, you may wish to re-install the receive r because you have moved to a different area with different broadcast frequencies, you wish to reinstate a channel previously deleted from the channel list, or you want to watch new channels which have ...
-
JVC TU-DB1SU - page 19
- 18 - SPECIFICA TION GENERAL Broad casting system DVB-T 2k & 8k Video system P A L Number of preset channels 20 0 Channel frequencies 47 - 858 Mhz Stereo system MPEG Layer I & II 32/44.1/48 KHz Power requirements DC 6V , AC adapter: 100 - 240V , 50/60 Hz T erminals U/V Input P AL type U/V Output P AL type SCART-1 (TV) RGB, Y/C, Video outpu ...
-
JVC TU-DB1SU - page 20
- 19 - CONNECTING THE EXTERNAL DEVICES If your TV and VCR both have two scart sockets you can connect as follows.Unplug the aerial lead and connect this to the ANT IN socket on the rear of your receiver. Connect the aerial lead (supplied) from the LT OUT on the receiver to the ANT IN on the rear of the VCR. Then connect an aerial lead from the L T ...
-
JVC TU-DB1SU - page 21
- 20 - TROUBLESHOOTING GUIDE If you experience problems with the receiver or its installation, in the first instance please read carefully the relevant sections of this User Guide and this Troubleshooting section. ...
-
JVC TU-DB1SU - page 22
0804MKH-VT -VT C C 50054835 2004 Victor Company of Japan, Limited ...
¿Tienes una pregunta acerca de JVC TU-DB1SU?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con JVC TU-DB1SU, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con JVC TU-DB1SU probablemente compartirá una forma de solucionarlo.