-
Pelco C3432M-F - page 1
INST ALLA TION C3432M-F (6/08) Integrated Camera System IP110 Series Camclosure ® ...
-
Pelco C3432M-F - page 2
2 C3432M-F (6/08) Contents Important Safety Instructi ons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Open Sour ...
-
Pelco C3432M-F - page 3
C3432M-F (6/08) 3 List of Illustrations 1 DHCP Network Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2 Endura Network Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3 Private Network Ex ...
-
Pelco C3432M-F - page 4
4 C3432M-F (6/08) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions. 7. Only use attachments/accessories specified by ...
-
Pelco C3432M-F - page 5
C3432M-F (6/08) 5 Regulatory Notices This device complies with Part 15 of the FCC Rules. O peration is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE Th ...
-
Pelco C3432M-F - page 6
6 C3432M-F (6/08) Open Source Software Notice This product includes certain open source or other softwar e originated from third parties that is subject to the GNU General Public License (GPL), GNU Library/Lesser General Publ ic License (LGPL), and different and/or additional copyright lic enses, disclaimers, and notices. The exact terms of GPL, LG ...
-
Pelco C3432M-F - page 7
C3432M-F (6/08) 7 Description The IP110 Series Camclosure ® is an ind oor/outdoor , fixed mini do me system with a built-in 100Base-TX network interface for live streaming to a standard Web browser (Microsoft ® Internet Explorer ® or Firefox ® ). The network mini dome features open architectu re connectivity for third-party software recording s ...
-
Pelco C3432M-F - page 8
8 C3432M-F (6/08) Basic System Configurations IMPORT ANT NOTE. PLEASE READ . The network implementation s in this document are shown as general representations only and are not intended to show detailed network topologies. Y our actual network will differ , requiring changes or perhaps additional ne twork equipment to accommodate the systems as ill ...
-
Pelco C3432M-F - page 9
C3432M-F (6/08) 9 Figure 3. Private Network Example Figure 4. S tatic Network Example IP110 IP110 WEB BROWSER NETWORK SWIT C H IF NOT DH C P, C AMERA IS ASSIGNED DEF AUL T IP ADDRESS 192.168.0.20 ON NETMASK 255.255.0.0 C ABLE MODEM ROUTER / SWIT C H (DH C P SERVER DISABLED) NOTE: FOR A SE C URE NETWORK, PEL C O RE C OMMENDS THE IP110 C AMERA IS PLA ...
-
Pelco C3432M-F - page 10
10 C3432M-F (6/08) Cover and Back Box Installation The IP110 Series Camclosure integrated camera system mounts only to a surface. It can be wired through the cover into a surface, electrical box, plaster ring, or through a side conduit opening. BASIC SURFACE INSTALLATION 1. Remove the two 8-32 x 0.3 75-inch Phillips pan head screws and washers to s ...
-
Pelco C3432M-F - page 11
C3432M-F (6/08) 11 4S ELECTRICAL BOX INSTALLATION 1. Attach an ICS110-AP adapter plate (not supplied) to a 4S electrical box. Use two 8-32 x 0.75-inch Phillips flat head screws (supplied with both the IP110 and the ad apter plate). 2. Remove the two 8-32 x 0.3 75-inch Phillips pan head screws and washers to separate the cover from the back box. 3. ...
-
Pelco C3432M-F - page 12
12 C3432M-F (6/08) 404 PLASTER RING INSTALLATION 1. Remove the two 8-32 x 0.3 75-inch Phillips pan head screws and washers to separate the cover from the back box. 2. Pull cable/wires into the cover . Use three suppli ed 6-32 x 0.75-inch Phillips pan head screws o r two supplied 8-32 x 0.75-inch Phillips pan head screws to attach the cover to an in ...
-
Pelco C3432M-F - page 13
C3432M-F (6/08) 13 SIDE CONDUIT INSTALLATION 1. Remove the two 8-32 x 0.3 75-inch Phillips pan head screws and washers to separate the cover from the back box. 2. Remove the cond uit plug from the cover . Inst all a 0.75-inch (1.91 cm) threaded conduit connector (not supplied) into the conduit hole in the cover . 3. Attach the cover to the moun tin ...
-
Pelco C3432M-F - page 14
14 C3432M-F (6/08) Wiring T ables CAT5 CABLE Connect a Cat5 cable to the RJ-45 network connector . The 8-pin connector includes video and PoE for the camera. PoE (IEEE 802.3af) injects power over the same ca bling that carries the network data, eliminating the need for a separate power supply , This simplifies the installation and operation of the ...
-
Pelco C3432M-F - page 15
C3432M-F (6/08) 15 ALARM AND 24 V A C WIRES CONNECTING A RELAY DEVICE The IP110 Camclosure has an output for triggering an external device. It supports both momentary and continuous relay operation. Y ou can operate the relay interactively, during an acti ve connection, or automatically to coincide with certain events. T ypical applications in clud ...
-
Pelco C3432M-F - page 16
16 C3432M-F (6/08) CONNECTING ALARMS The IP110 Camclosure provides an alarm input for exte rnal signaling devices, such as door cont acts or motion detectors. Both normally open and normally closed devices are supported. Supervised Alarms When an alarm is configured as a supervised alarm, IP110 Camclosure maintains a constant electrical current thr ...
-
Pelco C3432M-F - page 17
C3432M-F (6/08) 17 Unsupervised Alarms When an alarm is configured as an unsupervised alarm, the Camclosure only triggers an alarm when the normal alarm state (open or closed) changes. Figure 12 illustrates the alarm a nd no alarm conditi ons of an unsupervised alarm input. A normally closed alarm input can be defeated with a bypass. A normally ope ...
-
Pelco C3432M-F - page 18
18 C3432M-F (6/08) Alarm Connection s Figure 14 shows how to wire the IP110 Camclosure to an alarm (refer to Wiring T ables on pag e 14). Figure 14. Unsupervise d Alarm In put Wiring NOTE: The black wire is internally connected to the Camc losure chassis. Do not connect directly to any potential except chassis ground. ALARM RETURN: BLA C K / WHITE ...
-
Pelco C3432M-F - page 19
C3432M-F (6/08) 19 Camera Module The IP110 Series Camclosure camera module includes the camera, camera bracket, and heater board. T o perform most camera adjustments, you must remove the module from the back box. Use the following instructions to install/remove the camera module. CAMERA ORIENTATION At the factory , the camera module is configured f ...
-
Pelco C3432M-F - page 20
20 C3432M-F (6/08) MODULE INSTALLATION T o install the camera module into the back box: 1. Plug the camera (10-pin), heater bo ard (4-pin), and service (3-pin) connectors into the ba ck box (refer to Figure 16). Figure 16. Back Box Connectors 2. Make sure the tabs on the camera bracket and the service connector are pointing out of the enclosure, aw ...
-
Pelco C3432M-F - page 21
C3432M-F (6/08) 21 Camera Adjustments T o perform camera adjustments, complete the following steps: 1. Make sure the camera and service connectors are connected to the board inside the back box. Y ou may have to remove the camera module from th e back box. 2. Connect a monitor to the service connector (refer to Service Connector on page 31). T urn ...
-
Pelco C3432M-F - page 22
22 C3432M-F (6/08) V ARIFOCAL LENS ZOOM AND FOCUS ADJUSTMENTS T o adjust the field of view and the focus: 1. Select a field of view by turning the zoom ad justment ring clockwise/counterclockwise (refer to Figure 18). 2. T ighten the zoom locking screw . 3. Adjust the focus by moving the focus locking screw clockwise/counterclockwise. 4. T ighten t ...
-
Pelco C3432M-F - page 23
C3432M-F (6/08) 23 DN/CH SERIES ADJUSTMENTS Refer to Figure 19 to adjust the IP110-DN o r IP110-CH model. Figure 19. Adjusting the IP110-DN/CH S eries Camclosure SWITCH SETTINGS Locate the DIP switch. Then set the switches for your installation. SW4-1: Auto Gain Control The automatic gain control (AGC) adju sts the image au tomatically to compensat ...
-
Pelco C3432M-F - page 24
24 C3432M-F (6/08) SW4-4: Flickerless In certain lighting conditions, a flicker in the light source may affect camera operation. Flic kering can be caused by a number of conditions, including the qua lity of the source power and the age and type of fluorescent bulbs and ballasts. Set SW4-4 to ON to enable flickerless operation. The ca mera will rem ...
-
Pelco C3432M-F - page 25
C3432M-F (6/08) 25 DAY/NIGHT OPERATION NOTE: This section only applies to DN model cameras. DN model cameras regularly check the brightness level of the field of view t o determine when to switch between day (color) and nig ht (black-white) operation. Actual brightness threshold levels are affected by camera angle, amount of zoom, field of view , l ...
-
Pelco C3432M-F - page 26
26 C3432M-F (6/08) DW/CW SERIES (WIDE DYNAMIC RANGE) ADJUSTMENTS Refer to Figure 21 to adjust the IP110-DW or IP110-CW model. Figure 21. Adjusting the IP110-DW/CW S eries Camcl osure SWITCH SETTINGS Locate the DIP switch. Then set the switches for your installation. SW1-1: V ideo Format Set SW1-1 to ON for NTSC. Set it to OFF for P AL. The default ...
-
Pelco C3432M-F - page 27
C3432M-F (6/08) 27 SW1-4: Auto White Balanc e/Manual White Balance Auto white balance (AWB) is enabled by default (ON). T o manually set and lock the white balance: 1. Set SW1-4 to ON. 2. Hold a white background in front of the lens until the video shows all white . 3. While holding the background in place, set SW1-4 to OFF . A green block and a wh ...
-
Pelco C3432M-F - page 28
28 C3432M-F (6/08) Figure 20 and T able D show how the camera switches between color and black-white operation for each setting. Figure 22. DW Model s Threshol d S witching Levels NOTE: These switching thresholds are approximate and we re measured u sing a 3.0 mm to 9.5 mm lens at f/1.0. Use the thresholds in T able D as a guide when installing the ...
-
Pelco C3432M-F - page 29
C3432M-F (6/08) 29 Camera Positioning Manually rotate and tilt the camera module to position the camera. Then tighten the tilt screws (axis 1 in Figure 23). NOTE: Do not over -rotate the module. Excessively turni ng the module in one direction could result in damage to the wiring. Figure 23. Positioning the Camera ì T ilt 140° (20°-1 ...
-
Pelco C3432M-F - page 30
30 C3432M-F (6/08) Install Dome and T rim Ring 1. T o adjust the dome liner refer to Figure 24 and complete the following steps: a. Align the screw holes in the trim ring with those in the back box to identify the proper dome liner position. b. Loosen the three Phillips screws located in t he trim ring. c. Insert the blade of a standard screwdriver ...
-
Pelco C3432M-F - page 31
C3432M-F (6/08) 31 Service Connector The IP110 Series Camclosure integrated camera system includes a service connector th at outputs camera video. Use it at the installation site to set up the field of view and focus the camera. Figure 25. S ervice Connector Pelco offers two optional items (CS T150 and ICS-SC) that plug directly into the service co ...
-
Pelco C3432M-F - page 32
32 C3432M-F (6/08) d. Solder the center connector of the cable to t he center pin of the plug. e. Thread the braid of the cable through the hole in the crimp pin. f. Solder the braid to the top of the crimp pin. g. Crimp the end of the crimp pin around the cable. h. Reassemble the support sleeve and the plug. Figure 26. Attaching the 2.5 mm Monaura ...
-
Pelco C3432M-F - page 33
C3432M-F (6/08) 33 Reset Button Use the reset button locate d on the board inside the back box to access the following modes: T o access one of these modes: 1. Press and hold the reset butto n. The unit starts cycling throug h the modes; hold the b utton for four seconds to access (cycle thro ugh) each mode. The uni t status indicator flashes the c ...
-
Pelco C3432M-F - page 34
34 C3432M-F (6/08) T roubleshooting Problem Possible Cause Suggested Remedy No video PoE power issue • Check Cat5 cable connection. • V erify PoE is enabled. • Disconnect the Cat5 cable from the PoE and then reconnect the cable. Check the LED inside the back box to see if it is fl ashing green, indicating the camera has power . Power issue (2 ...
-
Pelco C3432M-F - page 35
C3432M-F (6/08) 35 Image too light Installation error • Check DIP switch settings. • Use a service connector to check camer a operation. Connect one end of the service connector to the service connector input inside the back box. Then connect the other end of the service connector to a monitor . • Replace camera module with new camera. If the ...
-
Pelco C3432M-F - page 36
36 C3432M-F (6/08) Network not working Faulty cable connection Check all cabl e connections and e nsure all plugs are properly plugged in. Incorrect serial device configuration A hub will not work with the available network bandwidth shared across all ports. Use a Fast Ethernet switch, Gigabit Ethernet switch, or a cable modem router with an n-Port ...
-
Pelco C3432M-F - page 37
C3432M-F (6/08) 37 Specifications GENERAL Pan/T ilt Adjustment Manual Pan 360° T ilt 80° (20° to 100° range) Rotation 360° Construction Aluminum with steel camera mounting bracket and polycarbonate dome Cable Entry One 0.75-inch (1.91 cm) N PT threaded opening on side; two 0.75-inch (1.91 cm) openings on NEMA cover Finish Gray polyester powder ...
-
Pelco C3432M-F - page 38
38 C3432M-F (6/08) ENVIRONMENT AL Environment Low temperature, indoor/ou tdoor Operating T emperature -50° to 122°F (-46° to 50°C); de-ices to 25°F (-4°C) Thermostat Operation Heater is the rmostatically controlled to activate < 41°F (< 5°C) CAMERA Service Connector 3-conductor , 2.5 mm connector for video output to optional ICS-SC ca ...
-
Pelco C3432M-F - page 39
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any mer c handise proved defective in ma terial or wor kmanship for a period of one year afte r the date of shipment. Exception s to this warrant y are as noted below: • Five years on fiber opt ic products and TW3 000 Series unshield ed twisted pair (UT ...
-
Pelco C3432M-F - page 40
Worl dwide Headquarters 3500 Pelco W ay Clovis, California 93612 U S A U S A & Canada T el: (800) 289-9100 Fax: (800) 289-9150 International T el: +1 (559) 292-1981 Fax: +1 (559) 348-1120 www .pelco.com ISO 9001 Australia | Finland | France | G ermany | Italy | Macau | The Nethe rland s | Russia | S ingapore S outh Africa | S pain | S weden | U ...
¿Tienes una pregunta acerca de Pelco C3432M-F?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Pelco C3432M-F, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Pelco C3432M-F probablemente compartirá una forma de solucionarlo.