-
MTD MS1210 - page 1
USER MANUAL Electric Chain Saw MANUEL DE UTILISA TION T ronçonneuses Electriques MANUAL DEL USUARIO Sierras Electricas de Cadena W ARNING • PLEASE READ Beware of kickback. Hold chain saw firmly with both hands when using. For your own safety , please read and follow the safety precuations in this manual before attempting to operate your chain sa ...
-
MTD MS1210 - page 2
E N G L I S H E S P A Ñ O L 2 E N G L I S H PLEASE READ Dear Customer , Thank you for purchasing a McCulloch product. With proper operation and maintenance, it will provide you with years of service. In order to make the best use of your investment, be CERT AIN to familiarize yourself with the contents of the ENTIRE user manual before attempting t ...
-
MTD MS1210 - page 3
E N G L I S H E S P A Ñ O L 2 E N G L I S H PLEASE READ Dear Customer , Thank you for purchasing a McCulloch product. With proper operation and maintenance, it will provide you with years of service. In order to make the best use of your investment, be CERT AIN to familiarize yourself with the contents of the ENTIRE user manual before attempting t ...
-
MTD MS1210 - page 4
1 16 5 17 7 9 4 3 11 E N G L I S H 1-2. SAFETY FEA TURES Numbers preceding the descriptions correspond with the numbers on preceding page to help you locate the safety feature. 1 LOW-KICKBACK CHAIN helps significantly reduce kickback, or the intensity of kickback, due to specially designed depth gauges and Guard links. 9 LOCK / OFF BUTTON prevents ...
-
MTD MS1210 - page 5
1 16 5 17 7 9 4 3 11 E N G L I S H 1-2. SAFETY FEA TURES Numbers preceding the descriptions correspond with the numbers on preceding page to help you locate the safety feature. 1 LOW-KICKBACK CHAIN helps significantly reduce kickback, or the intensity of kickback, due to specially designed depth gauges and Guard links. 9 LOCK / OFF BUTTON prevents ...
-
MTD MS1210 - page 6
5 E N G L I S H SAFETY PRECAUTIONS FOR CHAIN SA W USERS (ANSI B175.1-1991, Annex C) (CAN3-Z62.1-M85 FEB85, Appendices A, B) Y our McCulloch Chain Saw is provided with a safety label located on the HAND GUARD . This label, along with the safe- ty instructions on these pages, should be carefully read before attempting to operate your saw . HOW TO REA ...
-
MTD MS1210 - page 7
5 E N G L I S H SAFETY PRECAUTIONS FOR CHAIN SA W USERS (ANSI B175.1-1991, Annex C) (CAN3-Z62.1-M85 FEB85, Appendices A, B) Y our McCulloch Chain Saw is provided with a safety label located on the HAND GUARD . This label, along with the safe- ty instructions on these pages, should be carefully read before attempting to operate your saw . HOW TO REA ...
-
MTD MS1210 - page 8
7 E N G L I S H BEW ARE OF: ROT A TIONAL KICKBACK THE PUSH (PINCH KICKBACK) (Figure 2-2A) AND PULL REACTIONS (Figure 2-2B) A= Kickback path A = Pull B = Kickback reaction zone B = Solid objects C = Push KICKBACK may occur when the NOSE or TIP of the guide bar touches an object, or when wood closes in and pinch - es the saw chain in the cut. T ip co ...
-
MTD MS1210 - page 9
7 E N G L I S H BEW ARE OF: ROT A TIONAL KICKBACK THE PUSH (PINCH KICKBACK) (Figure 2-2A) AND PULL REACTIONS (Figure 2-2B) A= Kickback path A = Pull B = Kickback reaction zone B = Solid objects C = Push KICKBACK may occur when the NOSE or TIP of the guide bar touches an object, or when wood closes in and pinch - es the saw chain in the cut. T ip co ...
-
MTD MS1210 - page 10
9 E N G L I S H 6. CONSIDER THE WORK AREA ENVIRONMENT : Use extreme caution when cutting small sized brush and sapling, as slender material may catch the saw chain and be whipped toward you or pull you off balance. Do not operate a chain saw in a tree unless you are specifically trained to do so. When cutting a limb that is under ten- sion, be aler ...
-
MTD MS1210 - page 11
9 E N G L I S H 6. CONSIDER THE WORK AREA ENVIRONMENT : Use extreme caution when cutting small sized brush and sapling, as slender material may catch the saw chain and be whipped toward you or pull you off balance. Do not operate a chain saw in a tree unless you are specifically trained to do so. When cutting a limb that is under ten- sion, be aler ...
-
MTD MS1210 - page 12
11 E N G L I S H 18. CARRYING THE SAW : Carry the saw by the front handle with the saw stopped. Keep your finger off the switch, and make sure that the guide bar and saw chain are to the rear . 19. GUARD AGAINST KICKBACK: W ARNING: Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the ...
-
MTD MS1210 - page 13
11 E N G L I S H 18. CARRYING THE SAW : Carry the saw by the front handle with the saw stopped. Keep your finger off the switch, and make sure that the guide bar and saw chain are to the rear . 19. GUARD AGAINST KICKBACK: W ARNING: Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the ...
-
MTD MS1210 - page 14
13 E N G L I S H 30. DO NOT FORCE a small saw to do a job requiring a heavier duty unit. 31. EXAMINE THE ELECTRICAL SWITCHES. Do not use the chain saw if the switches do not properly turn on and off. Do not attempt to make any repairs to the electric switches. T ake your saw to a McCulloch Authorized Service Center . 32. MAINT AIN EXTENSION CORDS. ...
-
MTD MS1210 - page 15
13 E N G L I S H 30. DO NOT FORCE a small saw to do a job requiring a heavier duty unit. 31. EXAMINE THE ELECTRICAL SWITCHES. Do not use the chain saw if the switches do not properly turn on and off. Do not attempt to make any repairs to the electric switches. T ake your saw to a McCulloch Authorized Service Center . 32. MAINT AIN EXTENSION CORDS. ...
-
MTD MS1210 - page 16
16 E N G L I S H 3-1. INTRODUCTION This unit is designed for occasional homeowner use and should not be used for commercial purposes or subjected to heavy continuous use. Y our new chain saw can be used for a variety of projects such as cutting firewood, making fence posts, felling small trees, limbing, pruning at ground level, and light carpentry ...
-
MTD MS1210 - page 17
16 E N G L I S H 3-1. INTRODUCTION This unit is designed for occasional homeowner use and should not be used for commercial purposes or subjected to heavy continuous use. Y our new chain saw can be used for a variety of projects such as cutting firewood, making fence posts, felling small trees, limbing, pruning at ground level, and light carpentry ...
-
MTD MS1210 - page 18
17 18 E N G L I S H 3-5. SA W CHAIN TENSION ADJUSTMENT Proper tension of the saw chain is extremely important and must be checked before starting, as well as during, any cutting operation. T aking the time to make needed adjustments to the saw chain will result in improved cutting per- formance and prolonged chain life. NOTE: A new chain and bar wi ...
-
MTD MS1210 - page 19
17 18 E N G L I S H 3-5. SA W CHAIN TENSION ADJUSTMENT Proper tension of the saw chain is extremely important and must be checked before starting, as well as during, any cutting operation. T aking the time to make needed adjustments to the saw chain will result in improved cutting per- formance and prolonged chain life. NOTE: A new chain and bar wi ...
-
MTD MS1210 - page 20
19 20 E N G L I S H 3-7. FILLING OIL T ANK Using a funnel, fill oil tank with McCulloch Chain, Bar and Sprocket oil. Wipe up any spills. Make sure no dirt gets into the oil tank. 3-8. SELECTING THE PROPER EXTENSION CORD FOR YOUR SA W MODEL 1. When using the appliance, an extension cord of adequate size must be used for safety and to prevent loss of ...
-
MTD MS1210 - page 21
19 20 E N G L I S H 3-7. FILLING OIL T ANK Using a funnel, fill oil tank with McCulloch Chain, Bar and Sprocket oil. Wipe up any spills. Make sure no dirt gets into the oil tank. 3-8. SELECTING THE PROPER EXTENSION CORD FOR YOUR SA W MODEL 1. When using the appliance, an extension cord of adequate size must be used for safety and to prevent loss of ...
-
MTD MS1210 - page 22
21 22 E N G L I S H 5. With your RIGHT THUMB, depress the LOCK/OFF button (C) on the side of the rear handle, and at the same time squeeze the trigger . T o stop the saw , release the trigger (Figure 4-1C). NOTE: It is not necessary to maintain pressure on the LOCK/OFF button once the trigger is squeezed and the motor is running. The LOCK/OFF butto ...
-
MTD MS1210 - page 23
21 22 E N G L I S H 5. With your RIGHT THUMB, depress the LOCK/OFF button (C) on the side of the rear handle, and at the same time squeeze the trigger . T o stop the saw , release the trigger (Figure 4-1C). NOTE: It is not necessary to maintain pressure on the LOCK/OFF button once the trigger is squeezed and the motor is running. The LOCK/OFF butto ...
-
MTD MS1210 - page 24
23 24 E N G L I S H CAUTION A cord that is hot to the touch is overloaded. 1. When using the appliance, an extension cord of adequate size must be used for safety and to prevent loss of power and overheating. 2. The extension cord must be specifically intended for outdoor use and marked SW-A, SOW-A, STW-A, ST OW-A, SJW-A, SJOW-A, SJT OW-A, STJW , o ...
-
MTD MS1210 - page 25
23 24 E N G L I S H CAUTION A cord that is hot to the touch is overloaded. 1. When using the appliance, an extension cord of adequate size must be used for safety and to prevent loss of power and overheating. 2. The extension cord must be specifically intended for outdoor use and marked SW-A, SOW-A, STW-A, ST OW-A, SJW-A, SJOW-A, SJT OW-A, STJW , o ...
-
MTD MS1210 - page 26
26 25 5 - GENERAL CUTTING INSTRUCTIONS - INSTRUCCIONES POUR LA COUPE - INSTRUCCIONES DE CORT ADO GENERALES E N G L I S H 5-1. FELLING Felling is the term for cutting down a tree. Small trees up to 6-7” (15- 18cm) in diameter are usually cut in a single cut. Larger trees require notch cuts. Notch cuts determine the direction the tree will fall. FE ...
-
MTD MS1210 - page 27
26 25 5 - GENERAL CUTTING INSTRUCTIONS - INSTRUCCIONES POUR LA COUPE - INSTRUCCIONES DE CORT ADO GENERALES E N G L I S H 5-1. FELLING Felling is the term for cutting down a tree. Small trees up to 6-7” (15- 18cm) in diameter are usually cut in a single cut. Larger trees require notch cuts. Notch cuts determine the direction the tree will fall. FE ...
-
MTD MS1210 - page 28
28 E N G L I S H W ARNING As the felling cut gets close to the hinge, the tree should begin to fall. When tree begins to fall, remove saw from cut, stop engine, put chain saw down, and leave area along retreat path (Figure 5-2A). 5-2. LIMBING Limbing a tree is the process of removing the branches from a fallen tree. Do not remove supporting limbs ( ...
-
MTD MS1210 - page 29
28 E N G L I S H W ARNING As the felling cut gets close to the hinge, the tree should begin to fall. When tree begins to fall, remove saw from cut, stop engine, put chain saw down, and leave area along retreat path (Figure 5-2A). 5-2. LIMBING Limbing a tree is the process of removing the branches from a fallen tree. Do not remove supporting limbs ( ...
-
MTD MS1210 - page 30
30 E N G L I S H 5-4. BUCKING USING A SA WHORSE For personal safety and ease of cutting, the correct position for vertical bucking is essential (Figure 5-4A). VERTICAL CUTTING: A. Hold the saw firmly with both hands and keep the saw to the right of your body while cutting. B Keep the left arm as straight as possible. C. Keep weight on both feet. CA ...
-
MTD MS1210 - page 31
30 E N G L I S H 5-4. BUCKING USING A SA WHORSE For personal safety and ease of cutting, the correct position for vertical bucking is essential (Figure 5-4A). VERTICAL CUTTING: A. Hold the saw firmly with both hands and keep the saw to the right of your body while cutting. B Keep the left arm as straight as possible. C. Keep weight on both feet. CA ...
-
MTD MS1210 - page 32
E N G L I S H 6-1. GUIDE BAR MAINTENANCE W ARNING Ensure that the power cord is disconnected before performing any maintenance on your saw . Proper maintenance of the guide bar , as explained in this section, is essential to keep your saw in good working order . GUIDE BAR MAINTENANCE : Most guide bar problems can be prevented merely by keeping the ...
-
MTD MS1210 - page 33
E N G L I S H 6-1. GUIDE BAR MAINTENANCE W ARNING Ensure that the power cord is disconnected before performing any maintenance on your saw . Proper maintenance of the guide bar , as explained in this section, is essential to keep your saw in good working order . GUIDE BAR MAINTENANCE : Most guide bar problems can be prevented merely by keeping the ...
-
MTD MS1210 - page 34
E N G L I S H A low-kickback saw chain should always be used in conjunction with other kickback protection devices such as the Hand Guard furnished with your unit. Always use a replacement saw chain designed as “low-kickback” or a saw chain which meets the low-kickback per- formance. A standard saw chain (a chain which does not have the kickbac ...
-
MTD MS1210 - page 35
E N G L I S H A low-kickback saw chain should always be used in conjunction with other kickback protection devices such as the Hand Guard furnished with your unit. Always use a replacement saw chain designed as “low-kickback” or a saw chain which meets the low-kickback per- formance. A standard saw chain (a chain which does not have the kickbac ...
-
MTD MS1210 - page 36
E N G L I S H 7-1. PREVENT A TIVE MAINTENANCE W ARNING SERVICING A DOUBLE INSULA TED APPLIANCE In this double insulated appliance, 2 systems of insulation, instead of grounding, are provided. No grounding means is provided on a double insulated appliance, nor should a means for grounding be added to the appliance. No serv- iceable parts are inside. ...
-
MTD MS1210 - page 37
E N G L I S H 7-1. PREVENT A TIVE MAINTENANCE W ARNING SERVICING A DOUBLE INSULA TED APPLIANCE In this double insulated appliance, 2 systems of insulation, instead of grounding, are provided. No grounding means is provided on a double insulated appliance, nor should a means for grounding be added to the appliance. No serv- iceable parts are inside. ...
-
MTD MS1210 - page 38
USER MANUAL Electric Chain Saw MANUEL DE UTILISA TION T ronçonneuses Electriques MANUAL DEL USUARIO Sierras Electricas de Cadena W ARNING • PLEASE READ Beware of kickback. Hold chain saw firmly with both hands when using. For your own safety , please read and follow the safety precuations in this manual before attempting to operate your chain sa ...
¿Tienes una pregunta acerca de MTD MS1210?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con MTD MS1210, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con MTD MS1210 probablemente compartirá una forma de solucionarlo.