-
Sennheiser HME 110 - page 1
Instruction manual HME 110 Headset HME110_547018_0112_SP3.b ook Seite 1 Fr ei tag, 13. Januar 2012 5:20 17 ...
-
Sennheiser HME 110 - page 2
HME 110 | 1 Important safety information 왘 Please read this inst ruction manua l carefully and completely before using the product. 왘 Always include th is instruction m anual when passing the product on to third parties. 왘 This instruction manual is also available on the Intern et at www.sennheiser-aviation.com or www.sennhei ser.com. Prevent ...
-
Sennheiser HME 110 - page 3
Important safety information 2 | HME 110 attention. During flight operation, do not use the headset for making phone calls or listening to music. 왘 The product is capable of producing sound pressure exceeding 85 dB(A). In many countries 85 dB(A) is the maximum le gally permissib le level for con tinuous noise exposure during the working da y. Do ...
-
Sennheiser HME 110 - page 4
Important safety information HME 110 | 3 Intended use of the headset Intended use of the product includes • having read and un derstood this instructi on manual, especially the chapter “Important safety information” on page 1, • using the headset in helicopt ers, propel ler and turboprop aircraf t and within the operat ing condit ions as de ...
-
Sennheiser HME 110 - page 5
HME 110 headset 4 | HME 110 HME 110 headset The HME 110 p ilot headset is ch aracterized by the following features: • Passive headset with ex cellent noise attenuation • Excellent comfort due to ver y low weight, sof t ear pads and padded headband • Folda ble headband for easy and space-saving transport • Clear communic ations due to BKE 45 ...
-
Sennheiser HME 110 - page 6
Delivery includes HME 110 | 5 Delivery includes 1 HME 110 headset 1 wind screen for microphone 1 cable clip 1 instruction manual HME110_547018_0112_SP3.b ook Seite 5 Fr ei tag, 13. Januar 2012 5:20 17 ...
-
Sennheiser HME 110 - page 7
Putting the HME 110 in operation 6 | HME 110 Putting the HME 110 in operation Connecting the headset 2 1 왘 Connect the two jack plugs of the headset to the corresponding ja ck sockets of your audio system. Jack plug Jack socket of the audio system 5.25 mm jack plug 1 (P J -068 equivalent ) Microphone input ¼” (6.35 mm) jack plug 2 Head ...
-
Sennheiser HME 110 - page 8
Putting the HME 110 in operation HME 110 | 7 왘 Wear the headset so that the headband r uns over the top of your head. 왘 Adjust the length of the headband so that – your ears are completely inside the ear pads, – you feel ev en, gentle pressu re around your ears, – a snug fit of the headband on the head is ensured. 왘 Final adjustment is ...
-
Sennheiser HME 110 - page 9
Putting the HME 110 in operation 8 | HME 110 Positioning the microphone To position the microphone boom on either the right or left- hand side of the mouth: 왘 Loosen the quick-fixing device. 왘 Rotate the microphone bo om by 180°. 왘 Tighten the quick-fixing device. Positioning the microphone towards the corner of the mouth 왘 Bend the flexib ...
-
Sennheiser HME 110 - page 10
Using the HME 110 HME 110 | 9 Using the HME 110 Switching between mono and stereo operation In general, you’ll receive a mo no sound source so that the mono/stereo switch can remain set to “ MONO ” (factory setting). T o set the headset to stereo operation: 왘 Remove the ear pad (s ee “Replacing the ear pads” on page 14 ) from the ear cu ...
-
Sennheiser HME 110 - page 11
Using the HME 110 10 | HME 110 Adjusting the volume WA R N I N G ! Hearing damage due to high volum e levels! Listening at high volume le vels for long periods can l ead to perm anent hearing defect s. 왘 Before putting the headset on, set the volu me to a low level. 왘 Do not cont inuously expose yourself to high volumes. 왘 Adjust the volume t ...
-
Sennheiser HME 110 - page 12
Using the HME 110 HME 110 | 11 Adjusting the microphone gain “Mic Gain” According to JTSO approva l C58a, the m icrophone o utput voltage is factory preset to 400 mV . If the microphone output voltage is too high or too low for your audio system, it can be readjusted on the microphon e. 왘 Use a small slotted screwdrive r and turn the “Mic G ...
-
Sennheiser HME 110 - page 13
Using the HME 110 12 | HME 110 T r ansporting the headset For space-saving transportation, you can fold the headset: 왘 T uck the ear cups between the headband. T o unfold the headset: 왘 Grasp both ear cups and pull them up and away from the headband. HME110_547018_0112_SP3.b ook Seite 12 Freitag, 13. Januar 2012 5:20 17 ...
-
Sennheiser HME 110 - page 14
Cleaning and maintaini ng the HME 110 HME 110 | 13 Cleaning and maintaining the HME 110 Cleaning the headset CAUTION! Liquids can damage the electronics of the pr oduct! Liquids entering the housing o f the product can cause a short-circuit and d amage the electronic s. 왘 Keep all liquids fa r away from the product . 왘 Do not use any solvents o ...
-
Sennheiser HME 110 - page 15
Cleaning and maintaining the HME 110 14 | HME 110 Replacing the ear pads If the ear pads are damaged or worn out, replace them as follows: 왘 Grasp the edge of the old ear pads and peel the m up and away from the ear cups. 왘 Press the new ear pads onto the ear cu ps. HME110_547018_0112_SP3.b ook Seite 14 Freitag, 13. Januar 2012 5:20 17 ...
-
Sennheiser HME 110 - page 16
Accessories and spare parts HME 110 | 15 Accessories and spare parts The following accessories and spare parts are available from your Sennheiser partner. T o find a Sennheiser part ner in your country, search at www.sennheiser-aviation.com or www.sennheiser.com. • Wind screen for BKE 45-1 condenser m icrophone •H Z C 0 8 c a b l e c l i p • ...
-
Sennheiser HME 110 - page 17
If a problem occurs ... 16 | HME 110 If a problem occurs ... Problem Communication s in one ear only You are using a stereo audio system but the headset is set to mono operation. Set the mono/stereo switch to “ STEREO ” (see page 9 ). You are receiving a mono source but the headset is set to stereo operation. Set the mono/stereo switch to “ M ...
-
Sennheiser HME 110 - page 18
If a problem occurs ... HME 110 | 17 If a problem occurs that is not listed in the above table or if the problem canno t be solved wi th the proposed solutions, please cont act your l ocal Senn heiser partner for assistance. T o find a Sennheiser partner in your country, sea rch at www.sennheiser-aviation.com or www.sennhei ser.com. HME110_547018_0 ...
-
Sennheiser HME 110 - page 19
Specifications 18 | HME 110 Specifications Headset Transducer principle dynamic, closed Ear coupling circum-a ural Frequency response 45 – 15,000 Hz Nominal impedance mono: 150 stereo: 300 Noise attenuation > 10 to 40 dB Contact pressure approx. 10 N Microphone incl . preamplifier Transducer principle BKE 45-1 condenser mic capsule, ? ...
-
Sennheiser HME 110 - page 20
Specifications HME 110 | 19 General data Connection ca ble approx. 1,5 m, unilater al Weight without cable approx. 350 g Connectors ¼” (6.35 mm) jack plug for headphones, 5.25 mm jack plug (PJ-068 equivalent) for microphone Control s mono/stereo switch headphone volume control Temperature range operation: 15°C to 55°C storage: 55°C to ...
-
Sennheiser HME 110 - page 21
Manufacturer Declarations 20 | HME 110 Manufacturer Declarations W arranty Se n n h ei s e r e l e c t ro n i c Gm b H & C o . K G gi v e s a w a rr ant y o f 1 0 years on thi s product. For the current wa rranty condit ions, please visi t our web site at www.sennheiser-aviation.com or www. sennheiser.com or contact your Sennheis er partner. In ...
-
Sennheiser HME 110 - page 22
HME110_547018_0112_SP3.b ook Seite 1 Frei tag, 13. Januar 2012 5:20 17 Name plates ...
-
Sennheiser HME 110 - page 23
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Publ. 01/12, 547018/A01 HME110_547018_0112_SP3.b ook Seite 2 Fr ei tag, 13. Januar 2012 5:20 17 ...
¿Tienes una pregunta acerca de Sennheiser HME 110?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Sennheiser HME 110, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Sennheiser HME 110 probablemente compartirá una forma de solucionarlo.