-
Uniden UH013 - page 1
OWNER’S MANUAL UNIDEN Model UH013 UHF CB Radio ...
-
Uniden UH013 - page 2
Introduction 2 Features 2 Preventive Maintenance 2 Troubleshooting 2 Controls / Connectors 3 Indicators 4 Included with your UH013 5 Mounting Options 6 Operation 8 Setting the Squelch 8 Monitor 8 Selecting a Channel 9 Transmitting 9 Using Repeater Channels 9 Operating the UH013 in Duplex Mode 10 Scanning 10 Open Scan (OS) Mode 10 Group Scan (GS) Mo ...
-
Uniden UH013 - page 3
Preventive Maintenance: The following system checks should be made every six to twelve months: Check the Standing Wave Ratio (SWR). Inspect the tightness of all electrical connections. Inspect the antenna coaxial cable for wear or breaks on the shielding. Inspect the tightness of all screws and other mounting hardware. The Uniden UH013 is designed ...
-
Uniden UH013 - page 4
UNIDEN Model UH013 UHF CB Radio Controls / Connectors 3 UHF ANT . EXT .SP . DC 13.8V 6 4 5 9 10 1 1 12 1 2 3 8 15 13 14 Front Rear 7 Liquid Crystal Display (LCD) Rotary Channel Selector On/Off V olume Push to T alk (PTT) Button T one Call Monitor Button SLCT - Select Button SRCH - Search Button SCAN - Open or Group Scan MEM - Memory Button INST - I ...
-
Uniden UH013 - page 5
UNIDEN Model UH013 UHF CB Radio Indicators 4 SCN - Scan SL T - Select SRC - Search HLD - Hold BCL - Busy Channel Lockout SQT - Squelch T ight M - Memory - Channel Number - CTCSS Code S/RF - RF Signal Strength VOX - V oice Operated Microphone CTCSS - Continuous T one Coded Squelch System INS - Instant Channel DUP - Duplex TSQ - T one Squelch (Option ...
-
Uniden UH013 - page 6
5 UH013 Owners Manual OWNER’S MANUAL UNIDEN Model UH0 13 UHF CB Radio Microphone Hanger , Screws and W ashers DC Power Cord with Fuse Display Mount Bracket Display Unit Microphone Consumer Support Card Uniden Australia Pty Limited Attn: Service Division 345 Princes Highway Rockdale NSW 2216 AUSTRALIA AFFIX STAMP HERE Mounting Bracket, Knobs, W as ...
-
Uniden UH013 - page 7
UNIDEN Model UH013 UHF CB Radio Mounting Options Mounting the complete radio (T ransceiver with Display Unit) Remote mounting of the T ransceiver Unit 6 The radio can be mounted complete - or - with the Display Unit remote of the T ransceiver . a) Plug in display cable from the Display Unit to the transceiver . b) Hinge the Display Unit into the tr ...
-
Uniden UH013 - page 8
Fixing the Display Rear Bracket T o mount the Display Unit it needs to be fitted with a Display Rear Bracket (included in package). a) Position the Display Rear Bracket so that one end fits over the two studs at the end of the Display Unit. b) Push it into place until the fixing screw hole is aligned with its threaded counterpart. c) Secure the Dis ...
-
Uniden UH013 - page 9
Turn the Unit ON by rotating the volume control clockwise. The UH013 has 2 Levels Preset Squelch. It requires no adjustment. However , if you are in a very high noise area it may break through. Press to select the tight squelch mode. The SQT icon appears. Setting the Squelch Strong Signals Medium Signals Weak Signals Noise Think of the squelch cont ...
-
Uniden UH013 - page 10
The Signal coming from your radio is received by the Repeater Station and then retransmitted at the same time on another channel. This operation is called "Duplexing". For example, CH01 on Duplex Mode will Receive on CH 01 but T ransmit on CH31 CH02 on Duplex Mode will Receive on CH 02 but T ransmit on CH32 etc .... If you transmit on CH0 ...
-
Uniden UH013 - page 11
UNIDEN Model UH013 UHF CB Radio Operation Press and hold for 2 seconds to switch Duplex ON. The DUP icon appears. If Duplex is not required - press and hold for 2 seconds again to switch Duplex off. Only channels 01 - 08 are available for Duplex 10 NOTE Check with your local Retailer for information on available Repeaters. Scanning The UH013 has a ...
-
Uniden UH013 - page 12
T o deactivate SCAN, press the button or the PTT button. Press and hold for 2 seconds to turn off Group Scan Mode. UNIDEN Model UH013 UHF CB Radio Operation 1 1 If the Priority Channel becomes active the radio will stay on that channel for as long as the signal is present. If the received signal ceases, Priority Scanning continues after 3 seconds. ...
-
Uniden UH013 - page 13
12 If the channel is already in use, you can prevent the UH013 from transmitting . This is particularly important when using CTCSS. Press 2 times. T urn the Rotary Channel Selector to display . Press and hold for 2 seconds to store the new setting. SLCT SLCT Busy Channel Lockout If a button is not pressed within 10 seconds the UH013 will automatica ...
-
Uniden UH013 - page 14
13 Turn the Rotary Channel Selector to the desired channel to use CTCSS. Press and hold for 2 seconds. CTCSS icon flashes. Turn the Rotary Channel Selector to select the desired CTCSS code 01 - 38. Press once to store the new setting. Rotary Channel Selector Channels 05 and 35 are Emergency Channels and channel 1 1 is a Calling Channel. CTCSS canno ...
-
Uniden UH013 - page 15
14 UNIDEN Model UH013 UHF CB Radio Operation Searching Searching checks every frequency within the Band. If an active channel is located the UH013 will stop on that channel until 2 seconds after the transmission ends, then continue. Search Hold 1. T o stop the search, press at any time. HLD is displayed. 2. T o continue, press again. Skip Changing ...
-
Uniden UH013 - page 16
15 Outline Selective Calling (SELCALL) is a special Sequential T one Squelch System that allows the user to receive/transmit calls selectively from/to an individual or group, on a shared busy channel. The UH013 has an Optional Selective Calling system . Exceptional features, like Receiver Quieting, T one Squelch Scanning, T one and Group Calling ma ...
-
Uniden UH013 - page 17
UNIDEN Model UH013 UHF CB Radio Frequency & CTCSS T one Lists 16 NOTE: Channel 05 1 1 and 35 are not CTCSS programmable. CTCSS TONE List T one No. 01 02 03 04 05 06 07 08 09 10 1 1 12 13 14 15 16 17 18 19 20 21 22 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 23 OFF 67.0 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100.0 T one Frequency (Hz ...
-
Uniden UH013 - page 18
ONE YEAR LIMITED W ARRANTY IMPORT ANT : Evidence of the original purchase is required for warranty service. W ARRANTOR: Uniden New Zealand Limited. Uniden Australia Pty Ltd. ACN 001 865 498 ELEMENTS OF W ARRANTY : Uniden warrants to the original retail owner for the duration of this warranty its UH013 (hereinafter referred to as the Product), to be ...
-
Uniden UH013 - page 19
C 2002 Uniden Australia Pty Limited / Uniden New Zealand Limited Printed in the Philippines PPC: UTZZ01887ZZ ...
¿Tienes una pregunta acerca de Uniden UH013?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Uniden UH013, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Uniden UH013 probablemente compartirá una forma de solucionarlo.