-
Alamo SHD88 - page 1
©2009 Alamo Group Inc. $0.00 Published 03/09 Part No. 80321 1C OPERA T OR’S MANUAL ALAMO INDUSTRIAL ® 1502 E. W alnut Seguin, T exas 78155 830-372-3551 Email: parts@alamo-industrial.com FLAIL MOWER This Operator' s Manual is an integra l part o f the safe operatio n of this machine and must be maint ained with the un it at all times. READ, ...
-
Alamo SHD88 - page 2
T o the Owner/Operator/Dealer All implements with moving p arts are po tentially hazardous . Ther e is no substitute for a cautious, safe-minded operator who recognizes the poten tial hazards and fo llows reasonable safety pr actices. The manufa cturer has designed this implement to be used with all its sa fety equipment p roperly att ached to mi n ...
-
Alamo SHD88 - page 3
In order to reduce accidents and enha nce the safe operation of mowers, Alamo Industrial, in cooperation with other industry manufacturers has developed the AEM/FEMA I ndustrial and Agri cultural Mower Safety Practices video and guide book. The video will familiarize and instruct mower -tractor operators in safe practices when using industrial and ...
-
Alamo SHD88 - page 4
Alamo Industrial Division is willing to provide one (1) AEM Mower Safety Practices V ideo Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety V ideo DVD Format – AEM/FEMA Mower Operator Safety V ideo Mower Operator ’ s Manual AEM Mower Operator ’ s Safety Manual Requester Name Phone: Requester Address: City S tate Zip Code Mower Mod ...
-
Alamo SHD88 - page 5
T able of Content s SAFETY SECTION .......... ................................. ............................ ............................ ........... 1-1 General Safety Inst ructions and Practices ............... ................ ................ ................ ................. ..... ................. ... 1-2 Operator Safety In struc tions and P ...
-
Alamo SHD88 - page 6
Starting the Tractor ........... ................ ................. ................ ................ ................ .............. ......... ................ ....... 4-23 Brake and Differential Lock Set ting ............. ................ ................ ................. ................ ............. ......... .............. 4-23 Raising the ...
-
Alamo SHD88 - page 7
Safety Section 1-1 © 2009 Alamo Group Inc. SAFETY SECTION ...
-
Alamo SHD88 - page 8
SAFETY SHD 03/09 Safety Section 1-2 © 2009 Alamo Group In c. SAFETY General Safety Instruct ions and Practices A careful operator is the best opera tor . Safety is of p rimary import ance to the m anufacturer an d should be to the owner/operator . Most accidents ca n be avo ided by bein g aware of your equipm ent, your surroun dings, and observing ...
-
Alamo SHD88 - page 9
SAFETY SHD 03/09 Safety Section 1-3 © 2009 Alamo Group In c. SAFETY Operator Safety Instr uctions and Practices The rot ating par ts of this machin e continue to rot ate even af ter the PT O has b een turned of f. The operator should r emain in his seat for 60 se conds afte r the brake has been set, th e PTO diseng aged, the tractor turned of f, a ...
-
Alamo SHD88 - page 10
SAFETY SHD 03/09 Safety Section 1-4 © 2009 Alamo Group In c. SAFETY Al ways rea d care f u ll y an d comp l y f u ll y w ith th e manu f ac t urer ’ s instructions when handling oil, solvent s, cleansers, and any other chemical agent. (SG-22) KEEP A W A Y FROM ROT A TING ELEMEN TS to prevent entanglement and possible serious injury or death. (SG ...
-
Alamo SHD88 - page 11
SAFETY SHD 03/09 Safety Section 1-5 © 2009 Alamo Group In c. SAFETY Equipment Operation Safety Instructions and Practices DO NOT operate this Implement o n a T ractor that is not properly maintain ed. Should a mechanical or Tractor control failu re occur while operating, immediately shut down the T ractor and perform rep airs before resumi ng oper ...
-
Alamo SHD88 - page 12
SAFETY SHD 03/09 Safety Section 1-6 © 2009 Alamo Group In c. SAFETY Fl a il M owers are capa bl e un d er a d verse con diti ons o f th row i ngo bj ec t s for great dist ances (100 yar ds or more) and cau sing seriousinjur y or death. Follow safety messages carefully . STOP MOWING IF P ASSERSBY AR E WITHIN 100 Y ARDS UNLESS: -Front and Rear Defle ...
-
Alamo SHD88 - page 13
SAFETY SHD 03/09 Safety Section 1-7 © 2009 Alamo Group In c. SAFETY Do not mount or di smount the T ractor while the tractor is moving. Mount the T r actor only when the T ractor and all moving parts are comp letely stopped. (SG-12) S tart tractor only when properly sea ted in the T ractor seat. S tarting a tractor in gear can resu lt in injury or ...
-
Alamo SHD88 - page 14
SAFETY SHD 03/09 Safety Section 1-8 © 2009 Alamo Group In c. SAFETY Do Not operate this eq uipmen t in areas wher e in se ct s such as bees may att a ck you a nd/or cause you to lose contro l of the equipm ent. If you must enter in such areas, use a tractor with an enclosed Cab and close the windows to pr event insect s from entering. If a tractor ...
-
Alamo SHD88 - page 15
SAFETY SHD 03/09 Safety Section 1-9 © 2009 Alamo Group In c. SAFETY Avoid mo wing in reverse direction when poss ible. Check to make sure ther e are no persons behind the mower and use extr eme care when mowing in reverse. Mow only at a slow ground spee d where you can safely operate and contro l the tractor and mower . Never mow an area that yo u ...
-
Alamo SHD88 - page 16
SAFETY SHD 03/09 Safety Section 1-10 © 2009 Alamo Group In c. SAFETY Connecting or Disconnecting Im plement Safety Instructions and Practices DO NOT allow any person under a folded wing unless wing is secur ely locked up or suppor ted. DO NOT approach the Imple ment unless the T ractor is turned off and all motio n has ceased. Neve r work under th ...
-
Alamo SHD88 - page 17
SAFETY SHD 03/09 Safety Section 1-11 © 2009 Alamo Group In c. SAFETY T ransporting Safety Instructions and Practices Each Rear Wheel must have a minimum of 1,000 pounds cont act with the surface to prevent lateral instability and possible tip-over which could result in serious bodily in jury or even death. Widen the wheel trea d and add weight s i ...
-
Alamo SHD88 - page 18
SAFETY SHD 03/09 Safety Section 1-12 © 2009 Alamo Group In c. SAFETY T ransp ort only at spe eds where you can mainta in control of the equipment. Seriou s accident s and injurie s can result from oper ating this equipment at high speeds. Underst and the T ractor and Implement a nd how it handles before transporting on street s and hi ghways. Make ...
-
Alamo SHD88 - page 19
SAFETY SHD 03/09 Safety Section 1-13 © 2009 Alamo Group In c. SAFETY Maintenance and Service Safet y Instructions and Practices Make sure the PTO shield , integral driveline shie lds, and input shields are is installed when using PT O-driven equipment. Always re place any shield if it is damaged or missing. (S3PT -8) Relieve hydraulic pr essure pr ...
-
Alamo SHD88 - page 20
SAFETY SHD 03/09 Safety Section 1-14 © 2009 Alamo Group In c. SAFETY Periodically inspect all moving part s for wear and rep lace when necessary with au thorized service part s. Look for loose fastener s, worn or broken p art s, and leaky or loose fittings. Make sure all pins h ave cotter pins and washers. Serious in jury may occur from not mainta ...
-
Alamo SHD88 - page 21
SAFETY SHD 03/09 Safety Section 1-15 © 2009 Alamo Group In c. SAFETY Concluding Safety Instr uctions and Practices Always disconnect th e wire leads from th e mower valve solen oid before performing service on the T ractor or Mower . Use caution when working on the T ractor or Mower . T ractor engine mu st be stopped before working on Mower or T r ...
-
Alamo SHD88 - page 22
SAFETY SHD 03/09 Safety Section 1-16 © 2009 Alamo Group In c. SAFETY Decal Location NOTE: Alamo Industrial supplies safety decal s on this product to promote sa fe operation. Damag e to the decals may occur while in sh ipping, use, or reconditioning. Alamo I ndustr ial cares about th e safety of its customers, operators, and bystanders, and will r ...
-
Alamo SHD88 - page 23
SAFETY SHD 03/09 Safety Section 1-17 © 2009 Alamo Group In c. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. 00725746 1 PELIGRO T ranslate Saf ety Material 2. 00773723 1 PELIGRO T ranslate Dr iveline Instructions 3. 002369 1 DANGER Multi-Hazard 4. 002425 1 DANGER Front Shield 5. 00756004 ref DANGER Shield Missing 6. 00756005 ref DANGER Rotating Dr ...
-
Alamo SHD88 - page 24
SAFETY SHD 03/09 Safety Section 1-18 © 2009 Alamo Group In c. SAFETY Decal Description Peligro T ransla tion, If you do not know how to read English, please find someone who knows how to read English. P/N 00725746 PELIGRO! S panish T ranslati on for Driveline Safety P/N 00773723 Danger! Mult-Hazard W arning. Failing to follow these Safety Messages ...
-
Alamo SHD88 - page 25
SAFETY SHD 03/09 Safety Section 1-19 © 2009 Alamo Group In c. SAFETY DANGER! Guard Missing, Do Not Oper ate. If you see this decal, Do No t Operate the mower u ntil the shield has been repl ac e d. P/N 00756004 DANGER! Rotating Driveline Keep Away , Contact can cause death. P/N 00756005 DANGER! Make certain that drivelin es are correct length and ...
-
Alamo SHD88 - page 26
SAFETY SHD 03/09 Safety Section 1-20 © 2009 Alamo Group In c. SAFETY W ARNING! Failure to use and maintain shields and deflectors in good condition may lead to injury or death from ent anglement with rot ating part s. being hit by object s thrown with great fo rce by blades, or by blade contact. P/N 00725739 W ARNING! Do not operate with Belt Shie ...
-
Alamo SHD88 - page 27
SAFETY SHD 03/09 Safety Section 1-21 © 2009 Alamo Group In c. SAFETY Instructions to properly lubricate and check mower for potential problems pr ior to operation. P/N 000108 Information that Grease Fitting is present and must apply grease. P/N 000678 INFORMA TION - 8 Hour Lubrication Chart P/N 001830 Cutting Height Adjustment Chart P/N 002023 ...
-
Alamo SHD88 - page 28
SAFETY SHD 03/09 Safety Section 1-22 © 2009 Alamo Group In c. SAFETY Operator's Manu al (with repair part s) and warranty was attached to this implement during fina l inspection. P/N 00763977 IMPORT ANT - Use only Gen uine Alamo In dustrial replacement p art s. P/N 02925100 ALAMO NAME LOGO. P/N 001650 ALAMO INDUSTRIAL LOGO P/N 001651 ...
-
Alamo SHD88 - page 29
SAFETY SHD 03/09 Safety Section 1-23 © 2009 Alamo Group In c. SAFETY NAME LOG O - Alamo Industrial P/N 02960766 Read Operato r ’s Ma nual! The ope rator’s manual is located inside this canister . If the manual is missing order one fr om you r dealer . P/N 00776031 ...
-
Alamo SHD88 - page 30
SAFETY SHD 03/09 Safety Section 1-24 © 2009 Alamo Group In c. SAFETY Federal Laws and Regulations This section is intend ed to explain in broa d terms the concep t and effect of federal laws and reg ulations concerning emplo yer and employe e equipment oper at ors. This section is not intended as a legal interpretation of the law an d should n ot ...
-
Alamo SHD88 - page 31
...
-
Alamo SHD88 - page 32
...
-
Alamo SHD88 - page 33
...
-
Alamo SHD88 - page 34
...
-
Alamo SHD88 - page 35
...
-
Alamo SHD88 - page 36
...
-
Alamo SHD88 - page 37
...
-
Alamo SHD88 - page 38
...
-
Alamo SHD88 - page 39
...
-
Alamo SHD88 - page 40
...
-
Alamo SHD88 - page 41
...
-
Alamo SHD88 - page 42
...
-
Alamo SHD88 - page 43
...
-
Alamo SHD88 - page 44
...
-
Alamo SHD88 - page 45
...
-
Alamo SHD88 - page 46
...
-
Alamo SHD88 - page 47
...
-
Alamo SHD88 - page 48
...
-
Alamo SHD88 - page 49
...
-
Alamo SHD88 - page 50
...
-
Alamo SHD88 - page 51
...
-
Alamo SHD88 - page 52
...
-
Alamo SHD88 - page 53
...
-
Alamo SHD88 - page 54
...
-
Alamo SHD88 - page 55
...
-
Alamo SHD88 - page 56
...
-
Alamo SHD88 - page 57
...
-
Alamo SHD88 - page 58
...
-
Alamo SHD88 - page 59
...
-
Alamo SHD88 - page 60
...
-
Alamo SHD88 - page 61
...
-
Alamo SHD88 - page 62
...
-
Alamo SHD88 - page 63
...
-
Alamo SHD88 - page 64
...
-
Alamo SHD88 - page 65
...
-
Alamo SHD88 - page 66
...
-
Alamo SHD88 - page 67
...
-
Alamo SHD88 - page 68
...
-
Alamo SHD88 - page 69
...
-
Alamo SHD88 - page 70
...
-
Alamo SHD88 - page 71
...
-
Alamo SHD88 - page 72
...
-
Alamo SHD88 - page 73
...
-
Alamo SHD88 - page 74
...
-
Alamo SHD88 - page 75
Introduction Section 2-1 © 2009 Alamo Group Inc. INTRODUCTION SECTION ...
-
Alamo SHD88 - page 76
INTRODUCTION SHD 03/09 Introduction Section 2-2 © 2009 Alamo Group Inc. INTRODUCTION This Flail Mower is designed with ca re and built with quality materials by skilled workers . Proper assembly , maintenance, and ope rating practices, as described in this manual, will help t he owner/operator get years of satisfactory service from the machine. Th ...
-
Alamo SHD88 - page 77
INTRODUCTION SHD 03/09 Introduction Section 2-3 © 2009 Alamo Group Inc. INTRODUCTION The Super Heavy Duty Flail is made fr om the proven, ti me-tested design of Alamo Industrial, of fering you a manicured look with subst antial safety . It is the ideal machine not only for roadside use, but also for p a rks, playgrounds, school g rounds, and even ...
-
Alamo SHD88 - page 78
INTRODUCTION SHD 03/09 Introduction Section 2-4 © 2009 Alamo Group Inc. INTRODUCTION Attention Owner/Operator BEFORE OPERA TING THIS MACHINE: 1. Carefully read the Operator’s Manual, comp letely underst and the Safety Message s and instructions, and know how to operate correctly both the tractor and implement. 2. Fill out the Warranty Card in fu ...
-
Alamo SHD88 - page 79
Assembly Section 3-1 © 2009 Alamo Group Inc. ASSEMBL Y SECTION ...
-
Alamo SHD88 - page 80
ASSEMBLY SHD 03/09 Assembly Section 3-2 © 2009 Alamo Group Inc. ASSEMBL Y GENERAL T o help you assemble your new SHD FLAIL to your trac tor , we provide you with drawings, instructions, and information, if nece ssary , you may get more inform ation or clarification fr om our T echnica l Services Depart ment over the phone . IMPORT A NT Reference t ...
-
Alamo SHD88 - page 81
ASSEMBLY SHD 03/09 Assembly Section 3-3 © 2009 Alamo Group Inc. ASSEMBL Y KNIFE ASSEMBL Y T ip cutterhousing back (Figure 2) and p lace a block under roller to sa fely support unit. Remove shipping skids and drive pulley side belt guar d fender . If necessary , install knives, as shown, on e row at a time. ALL KNIFE PINS ARE INST ALLED W ITH THEIR ...
-
Alamo SHD88 - page 82
ASSEMBLY SHD 03/09 Assembly Section 3-4 © 2009 Alamo Group Inc. ASSEMBL Y GEARBOX AND EXTENSION SHAFT ASSEMBL Y For forward rot ation att ach the ou tboard bearin g plate (item 1) on the left side of cutter housing with (2) 3/8” x 7/8” bolt s, and (3) 3/8” locknut s. The third nut is used at the rear mounting hole (item2). This bolt is used ...
-
Alamo SHD88 - page 83
ASSEMBLY SHD 03/09 Assembly Section 3-5 © 2009 Alamo Group Inc. ASSEMBL Y DRIVELINE A TT ACHMENT Before starting a ssembly , make certain that all paint, dirt, and grease are removed from gearbox shaft (1). T o ease assembly app ly a light coat of grease to splines and assemble. Do not assemble a drive line without a shield. Attach the slip clutch ...
-
Alamo SHD88 - page 84
ASSEMBLY SHD 03/09 Assembly Section 3-6 © 2009 Alamo Group Inc. ASSEMBL Y IDLER ARM ASSEMBL Y Do not secure at this time. 1. Remove fasteners and shaft protector from end of driveline. Lightly grease shaf t. Install key and driveline pulley . Do not secure a t this time. Image ASM-FL-0052 2. Align all three pulleys using a square to deter- mine al ...
-
Alamo SHD88 - page 85
ASSEMBLY SHD 03/09 Assembly Section 3-7 © 2009 Alamo Group Inc. ASSEMBL Y INST ALLA TION OF MOWER TO TRACT OR Before attaching mower to tractor , it will be necessary th at each tract or lower hitch a rm has freedom of movement that the mower is comple tely independent of tr actor movement. This will allow the mower to pivot sideways as well as mo ...
-
Alamo SHD88 - page 86
...
-
Alamo SHD88 - page 87
Operation Sectio n 4- 1 © 2009 Alamo Group In c. OPERA TION SECTION ...
-
Alamo SHD88 - page 88
OPERATION SHD 03/09 Operation Section 4- 2 © 2009 Alamo Group Inc. OPERA TION ALAMO INDUSTRIAL SHD62, SHD74, SHD88 & SHD96 SUPER-HEA VY -DUTY FLAIL MOWE R OPERA TION INSTRUCTIONS Alamo Industrial SHD flail mowers are manufactur ed wit h quality material by skilled workers. These mowers are designed for cutting grass and small weeds up to 1” ...
-
Alamo SHD88 - page 89
OPERATION SHD 03/09 Operation Section 4- 3 © 2009 Alamo Group In c. OPERA TION 1. St andard Equipment and Specifications SHD 62 SHD74 Horsepower Required (Min.) 20HP 35HP T ractor PTO 540 RPM 540 RPM Cutting Capacity 1” 1” Cutting Height 1/2 - 6” 1/2 - 6” Cutting Width 62” 74” Overall Width 70” 82” Overall Length 40” 40” Weight ...
-
Alamo SHD88 - page 90
OPERATION SHD 03/09 Operation Section 4- 4 © 2009 Alamo Group Inc. OPERA TION SHD 88 SHD 96 Horsepow er Required ( Min.) 40HP 50H P T ractor PTO 540 RPM 540 R PM Cutting Capacity 1” 1” Cutting Height 1/2 - 6” 1/2 - 6” Cutting Width 88” 96” Overall Width 96” 103” Overall Length 40” 40 ” Weight ( Approximate) 1035 lbs 1 170 lbs H ...
-
Alamo SHD88 - page 91
OPERATION SHD 03/09 Operation Section 4- 5 © 2009 Alamo Group In c. OPERA TION 2. OPERA TOR REQUIREMENTS Safe operation of the unit is the responsibility of a qualifi ed operator . A qualified operator ha s read and understands th e implement and tractor Ope rator ’s Ma nua ls and is experienced in implement and tractor operation and all associa ...
-
Alamo SHD88 - page 92
OPERATION SHD 03/09 Operation Section 4- 6 © 2009 Alamo Group Inc. OPERA TION 3. TRACT OR REQUIREMENTS The tractor used to operate th e mower must have th e power , capacity and r equired equipme nt to safely operate the mower at a grou nd speed betwe en 2 and 5 MP H. Operatin g the mower with a tra ctor that does not meet the following r equireme ...
-
Alamo SHD88 - page 93
OPERATION SHD 03/09 Operation Section 4- 7 © 2009 Alamo Group In c. OPERA TION 3.3 T ractor Horsepower The horsepower required to operate the mower depend s on many factors includin g the vegetation to be cut, terrain cond itio n, op er a tor ex pe rie n ce , and c on di tion o f th e m ow er an d tra cto r . For most mow ing co nd itio n, the SHD ...
-
Alamo SHD88 - page 94
OPERATION SHD 03/09 Operation Section 4- 8 © 2009 Alamo Group Inc. OPERA TION DO NOT use a PTO adapter to att ach a non-matching Im plement driveline to a T ractor PTO. Use of an a dapter can double the operating speed o f the Implement resu lting in excessive vibration, thrown objects, and bl ade and implement failure. Adapter use will also chang ...
-
Alamo SHD88 - page 95
OPERATION SHD 03/09 Operation Section 4- 9 © 2009 Alamo Group In c. OPERA TION Never allow children or other persons to ride on the T ractor or Implement. Falling off can result in serious injury or death. (SG-1 0) Do not mount or di smount the T ractor while the tractor is moving. Mount the T r actor only when the T ractor and all moving parts ar ...
-
Alamo SHD88 - page 96
OPERATION SHD 03/09 Operation Section 4-10 © 2009 Alamo Group Inc. OPERA TION 5. ST ARTING THE TRACTOR The operat or must have a complete und erstanding of the p lacement, fun ction, and op erational us e of all tractor cont rols before starting the tractor . Review the tractor operator ’s manu al and consult an a uthorized dealer for tractor op ...
-
Alamo SHD88 - page 97
OPERATION SHD 03/09 Operation Section 4-11 © 2009 Alamo Group In c. OPERA TION 6.1 Connecting the Mower A-Frame to the T ractor 1. Make sure the tractor is equipped with the correct PT O shaft. Change shaf ts if needed. 2. Shorten or re move the tractor drawbar to a void interference when rais ing and lowering the mower . 3. Board the tractor a nd ...
-
Alamo SHD88 - page 98
OPERATION SHD 03/09 Operation Section 4-12 © 2009 Alamo Group Inc. OPERA TION Roller Height Adjustment The mower ’s cutting height is set by positioning the roller assembly for each mower sect ion. Each section must be set at th e same height to ensure an even cut across the entir e width of the mowe r . Place the tractor and mower on a lever su ...
-
Alamo SHD88 - page 99
OPERATION SHD 03/09 Operation Section 4-13 © 2009 Alamo Group In c. OPERA TION 7.1 Leveling Deck T o Facilitate a safe and efficient mowing operation, the mower sho uld be operated p arallel to the ground at all times. Never operate if front or rear of mower is tilted upward. Objects may be discharged at high speeds causing possible injury or even ...
-
Alamo SHD88 - page 100
OPERATION SHD 03/09 Operation Section 4-14 © 2009 Alamo Group Inc. OPERA TION 8.1 Driveline Length Check When fitting the mower to the tractor , the telescoping driveline must be inspecte d to ensure that at its mo st compressed position, the profiles do not “bottom out” , and when a t its farthest extended po sition, there is sufficie nt enga ...
-
Alamo SHD88 - page 101
OPERATION SHD 03/09 Operation Section 4-15 © 2009 Alamo Group In c. OPERA TION Shorten the driveline profiles as follows : • Remove the driveline from the tractor. • Position the mower to the point with the shortest distance between the tractor PTO shaft and cutter gearbox. Shut down th e tractor and securely block the mower in this position. ...
-
Alamo SHD88 - page 102
OPERATION SHD 03/09 Operation Section 4-16 © 2009 Alamo Group Inc. OPERA TION DO NOT allow any person under a folded wing unless wing is secur ely locked up or suppor ted. DO NOT approach the Imple ment unless the T ractor is turned off and all motio n has ceased. Neve r work under the frame work, or any lif ted component unl ess the implement is ...
-
Alamo SHD88 - page 103
OPERATION SHD 03/09 Operation Section 4-17 © 2009 Alamo Group In c. OPERA TION 9.2 Mower Pre- O peration Inspection /S ervice Before each mowe r use, a complete in spection and service is r equired to e nsure the mower is in a good and safe working condition. Dam aged and/ or broken parts should be repai red and/or replaced imme diately . T o ensu ...
-
Alamo SHD88 - page 104
OPERATION SHD 03/09 Operation Section 4-18 © 2009 Alamo Group Inc. OPERA TION • Ensure rubb er deflectors ar e in position and not damaged. Replace worn, broken , and missing sections imm ediately . • Ensure th e rollers are in good cond ition and rota te freely . • Ensure the dr iveline inte gral shield is in good condition and rotate free ...
-
Alamo SHD88 - page 105
OPERATION SHD 03/09 Operation Section 4-19 © 2009 Alamo Group In c. OPERA TION • Inspect cutter knives and knife pins for looseness and excessive wear . Make sure the mower is securely blo cked up before crawling beneath. Replace damag ed, worn, and missing knives as complete sets to mainta in cuttershaft balance. • Remove any grass or othe r ...
-
Alamo SHD88 - page 106
OPERATION SHD 03/09 Operation Section 4-20 © 2009 Alamo Group Inc. OPERA TION Flail Mower PRE-OP ERA TION Inspection Mower ID#________________ Make ____________________ Date: ________________ Shift ____________________ Before conducting the inspection, make sur e the tractor engine is off, all rotation has stopped and the tractor is in park with t ...
-
Alamo SHD88 - page 107
OPERATION SHD 03/09 Operation Section 4-21 © 2009 Alamo Group In c. OPERA TION T ractor PRE-OPERA TION Inspection Mower ID# ________________ Make ____________________ Date: ________________ Shift ____________________ Before conducting the inspection, make sur e the tractor engine is off, all rotation has stopped and the tractor is in park with the ...
-
Alamo SHD88 - page 108
OPERATION SHD 03/09 Operation Section 4-22 © 2009 Alamo Group Inc. OPERA TION 10. DRIVING THE TRACTOR AND IMPLEMENT Safe tractor transport req uires the operator possess a th orough knowledge of th e model being opera ted and precautions to t ake while driving with an att ached implem ent. Ensure the tractor has the capacity to handle the weight o ...
-
Alamo SHD88 - page 109
OPERATION SHD 03/09 Operation Section 4-23 © 2009 Alamo Group In c. OPERA TION Always disengage the tractor di fferential lock when turn ing. When engaged t he dif ferential lock will prevent or limit the tr actor from turning. During normal cutting co nditions, locking the dif ferential provides no benefit an d should not be used. 10.1 St arting ...
-
Alamo SHD88 - page 110
OPERATION SHD 03/09 Operation Section 4-24 © 2009 Alamo Group Inc. OPERA TION 10.3 Raising the Mower Using the tractor 3-point hi tch control le ver , raise the mower of f the ground about 6” , or just high enough to clear any ground obst acles. When raising the mower , make su re all connection p oints are securely a ttached an d at least 1” ...
-
Alamo SHD88 - page 111
OPERATION SHD 03/09 Operation Section 4-25 © 2009 Alamo Group In c. OPERA TION 10.5 Crossing Ditches and Steep Inclines When crossing ditches with steep banks or go ing up sharp inclines, it is possib le that the main driveline inner profile will penetrate in to the outer housing to it s maximum depth until the assembly beco mes solid (driveline i ...
-
Alamo SHD88 - page 112
OPERATION SHD 03/09 Operation Section 4-26 © 2009 Alamo Group Inc. OPERA TION Inclines and ditches should be app roached along a line which is at an an gle as shown. Thi s type of path will reduce the possib ility of over-collapse of the driveline and re sulting damage . If the gradient is so steep that such an approach increase s the possibility ...
-
Alamo SHD88 - page 113
OPERATION SHD 03/09 Operation Section 4-27 © 2009 Alamo Group In c. OPERA TION M any var i e d o bj ec t s, suc h as w i re, ca bl e, rope, or c h a i ns, can b ecome en t ang l e d i n th e operating p arts o f the mower head. These items could then swing o utside the housing at greater velocities than the blades. Such a situation is extremely ha ...
-
Alamo SHD88 - page 114
OPERATION SHD 03/09 Operation Section 4-28 © 2009 Alamo Group Inc. OPERA TION Fl a il M owers are capa bl e un d er a d verse con diti ons o f th row i ngo bj ec t s for great dist ances (100 yar ds or more) and cau sing seriousinjur y or death. Follow safety messages carefully . STOP MOWING IF P ASSERSBY AR E WITHIN 100 Y ARDS UNLESS: -Front and ...
-
Alamo SHD88 - page 115
OPERATION SHD 03/09 Operation Section 4-29 © 2009 Alamo Group In c. OPERA TION 1 1.4 PT O RPM and Ground Sp eed Ground speed for mowing will depend upon the height, type , and density of vege tation to be cut. Recommended speed for ef ficient mower performance is between 2 and 5 mph(3- 8 kph) . Operate th e mower at its full rated PT O speed to ma ...
-
Alamo SHD88 - page 116
OPERATION SHD 03/09 Operation Section 4-30 © 2009 Alamo Group Inc. OPERA TION Do not mow with two machines in the same ar ea except with Cab tractors with the wind ows closed. (SGM-1 1) Mow only in conditions where y ou have clear visibility in daylight or with adequate artificial lighting. Never mow in darkne ss or foggy cond itions where yo u ca ...
-
Alamo SHD88 - page 117
OPERATION SHD 03/09 Operation Section 4-31 © 2009 Alamo Group In c. OPERA TION 11 . 6 S hutting Down the Implement T o shut down the implement, first bring the tractor to a complete stop. Then slow down the im plement by reducing the eng ine speed before d isengaging the PTO. W ait for all motion to stop before proceedi ng to drive or shut dow n t ...
-
Alamo SHD88 - page 118
OPERATION SHD 03/09 Operation Section 4-32 © 2009 Alamo Group Inc. OPERA TION Never sta nd or allow another per son to stan d between a running T ractor and the Mower when disconnecting the Imple ment from the T racto r 3-point hitch. Always shut the T racto r off completely and set the p arking brake before attempting to disconnect the Mower pins ...
-
Alamo SHD88 - page 119
OPERATION SHD 03/09 Operation Section 4-33 © 2009 Alamo Group In c. OPERA TION Never work under the Implem ent, the framework, or any lif ted component unless the Implement is securely supporte d or blocked up to prevent sudden or inadvertent falling which could cause serious injury or even death. (SG-14) 13. MOWER STORAGE It is recommended that t ...
-
Alamo SHD88 - page 120
OPERATION SHD 03/09 Operation Section 4-34 © 2009 Alamo Group Inc. OPERA TION 14. TRANSPORTING THE TRACT OR AND IMPLEMENT Inherent hazards of operating the tr actor and implement and the possibilit y of accidents are not left behind when you finish work ing in an area . Therefore, the op erator mu st empl oy g ood ju dge men t an d sa fe oper atio ...
-
Alamo SHD88 - page 121
OPERATION SHD 03/09 Operation Section 4-35 © 2009 Alamo Group In c. OPERA TION If the tractor ’s hydraulic pump is not indepe ndent of th e tr actor PT O, or if the tractor PTO has to be run to have hydraulic power , disconnect the mower driveline from the tractor PT O output shaf t. Secure the driveline to the mower deck to prevent driveline da ...
-
Alamo SHD88 - page 122
OPERATION SHD 03/09 Operation Section 4-36 © 2009 Alamo Group Inc. OPERA TION Make cert ain that the “Slow Moving V ehicle” (SMV) sign is inst alled in such a wa y as to be clearly vis ible and leg ible. When transport ing the Equipment use the T ractor fla shing warning lights and follow all local traf fic regulations. (S G-6 ) The SMV (Slow- ...
-
Alamo SHD88 - page 123
OPERATION SHD 03/09 Operation Section 4-37 © 2009 Alamo Group In c. OPERA TION 14.2 Hauling the T ractor and Implement Before transporting a loade d tractor and imple ment, measure the height and width dimension s and gross weight of the complete loaded unit. Ensure that the load will be in compliance wit h the legal limits set for the areas that ...
-
Alamo SHD88 - page 124
OPERATION SHD 03/09 Operation Section 4-38 © 2009 Alamo Group Inc. OPERA TION 15. TROUBLESHOOTING GUIDE Problem Possible Cause Remedy Excessive Vi brations Check gearb ox bolt s. T ighten if loose. Check for missing knives on Replace missing knives. cutter shaft. Check to se e if knives ar e Free knives so they sw ing. free swinging. Blade broken ...
-
Alamo SHD88 - page 125
OPERATION SHD 03/09 Operation Section 4-39 © 2009 Alamo Group In c. OPERA TION Clutch Slips Excessively Clutch linings badl y worn or Repair clutch per maintena nce plates wa rped. section o f manuals. T oo much power for clutch. Reduce ground sp eed and ma terial intake. Oil on facings. Replace facing s. Friction facings glazed. Clean with emery ...
-
Alamo SHD88 - page 126
...
-
Alamo SHD88 - page 127
Maintenanc e Sec tio n 5- 1 © 2009 Alamo Group Inc. MAINTENANCE SECTION ...
-
Alamo SHD88 - page 128
MAINTENANCE SHD 03/09 Maintenanc e Section 5-2 © 2009 Alamo Group Inc. MAINTENANCE Daily Checks 1. Lubricate at the specified inte rvals as outlined in the lubrication diagram below . A ll mower grea se fittings are equipped with lub ricaps which snap over the grease fittings to prevent dirt fr om entering the fittings. Remove the cap and wipe the ...
-
Alamo SHD88 - page 129
MAINTENANCE SHD 03/09 Maintenanc e Section 5-3 © 2009 Alamo Group Inc. MAINTENANCE A. Cuttershaft Bearing s B. Roller Bearing C. Rear Mower Idler Arm D. Banjo Bearing E. Banjo Coupling F . Driveline Y oke G . Driveline T elescoping Joint Slip Clutch .A slip clutch is incorporated in th e PTO driveline. It is designed to slip , absorb the shock loa ...
-
Alamo SHD88 - page 130
MAINTENANCE SHD 03/09 Maintenanc e Section 5-4 © 2009 Alamo Group Inc. MAINTENANCE It is important that the clutch lining plates slip when an obst acle or load heavier than the clu tch setting is encountered. Therefor e, if the mach ine sits out side lon ger than 30 days and is e xposed to rain and/o r humid air it is important to make sure that t ...
-
Alamo SHD88 - page 131
MAINTENANCE SHD 03/09 Maintenanc e Section 5-5 © 2009 Alamo Group Inc. MAINTENANCE Replacing Cutter Unit Drive Belt Image Mnt-FL-00 20 1. Place unit on ground or support se curely . 2. Remove belt guard. 3. Remove idler arm spring. 4. Remove extension shaf t housing mounting bracket front bolt and loo sen rear bolt. 5. Loosen extension shaf t hous ...
-
Alamo SHD88 - page 132
MAINTENANCE SHD 03/09 Maintenanc e Section 5-6 © 2009 Alamo Group Inc. MAINTENANCE Roller Bearing Replacement Image Mnt-FL-0013 1. Remove roller and both bearing and b racket assemblies from mo wer . Lift the mower only high enough to remove the roller assembly . 2. Slide bearing a nd bracket assemblies off each en d of roller . If replacing with ...
-
Alamo SHD88 - page 133
MAINTENANCE SHD 03/09 Maintenanc e Section 5-7 © 2009 Alamo Group Inc. MAINTENANCE Cuttershaf t Bearing Replacement OUTBOARD BEARING - Image Mnt-FL-0022 1. Lif t cutter unit to maximum horizont al height; then, securely support ends of cu tterhousing. 2. Remove enough knive s to place a floor jack under center of cuttershaf t. 3. Securely support ...
-
Alamo SHD88 - page 134
MAINTENANCE SHD 03/09 Maintenanc e Section 5-8 © 2009 Alamo Group Inc. MAINTENANCE Inboard (D rive) Bearing - Images Mnt-FL -0023 and Mnt-FL-0020. 7. Remove belt guard. 8. Remove spring from idler arm. 9. Remove extension shaf t housing mounting br acket fa steners at the cutterhousing. Pivot mounti ng bracket assembly and re m ov e dr ive be lt. ...
-
Alamo SHD88 - page 135
MAINTENANCE SHD 03/09 Maintenanc e Section 5-9 © 2009 Alamo Group Inc. MAINTENANCE Cuttershaf t Replacement NOTE: It is recommended that cuttersha ft bea ring an d housin g assemblies be replaced when re placing cuttershaft. 1. Place unit on the gro und or s ecur ely su pp o rt at a conv en ien t he ig ht. 2. Remove cuttershaf t bearing and housin ...
-
Alamo SHD88 - page 136
MAINTENANCE SHD 03/09 Mainte nance Section 5-10 © 2009 Alamo Group Inc. MAINTENANCE General Information on Flail Mower V ibration FLAIL MOWERS - INFORMA TION BULLE TIN NO. 5 Excessive Vibration Vibration is a MONSTER and if allowed to continu e unchecked, ca n cause the complete break-u p of a machine in a very short time. A properly operated Flai ...
-
Alamo SHD88 - page 137
MAINTENANCE SHD 03/09 Mainte nance Section 5-11 © 2009 Alamo Group Inc. MAINTENANCE Some units have a harmonic which o ccurs below the nominal operating speed . On these units, it will be noticed that there is always a little vi bration at a particular RPM as the mo wer is being sped up to operatin g speed. This occurs as the shaf t passes through ...
-
Alamo SHD88 - page 138
ALAMO-INDUSTRIAL LIMITED W ARRANTY 1. LIMITED W ARRANTIES 1.01. Alamo Industrial warrants for one year from the purchase dat e to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser 1.02. Manufacturer will replace for the Purc haser any pa ...
-
Alamo SHD88 - page 139
T o keep your implement running ef ficiently and safely , read your manual thor oughly and follow these directions and the Safety Messages in this Manual. T he T able of Contents clearly identifies e ach sect ion where you can easily find the information you need. The OCCUP A TIONAL SAFETY AND HEAL TH ACT (1928.51 Su bpart C) makes these minimum sa ...
-
Alamo SHD88 - page 140
SHD - SOM 3/09 Printed in USA P/N 80321 1C ...
¿Tienes una pregunta acerca de Alamo SHD88?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Alamo SHD88, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Alamo SHD88 probablemente compartirá una forma de solucionarlo.