-
Harbor Freight Tools 97520 - page 1
AIR BRAD FINISH NAILER 16 GAUGE - 2” 97520 94481 ASSEMBL Y AND OPERA TING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally . Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 ...
-
Harbor Freight Tools 97520 - page 2
SKU 94481 For technical questions, please call 1-800-444-3353 P AGE 2 PRODUCT SPECIFICA TIONS SA VE THIS MANUAL Y ou will need this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on th ...
-
Harbor Freight Tools 97520 - page 3
SKU 94481 For technical questions, please call 1-800-444-3353 P AGE 3 6. Dress properly . Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid foot- wear are recommended when working. Wear restrictive hair covering to contain long hair . 7. Do not overreach. Keep p ...
-
Harbor Freight Tools 97520 - page 4
SKU 94481 For technical questions, please call 1-800-444-3353 P AGE 4 15. Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures. 16. Replacement parts and accessories. This product is to be repaired and serviced only by a qualied technician. When this product is se ...
-
Harbor Freight Tools 97520 - page 5
SKU 94481 For technical questions, please call 1-800-444-3353 P AGE 5 25. T ake caution, as some woods contain preservatives such as copper chromium arsenate (CCA) which can be toxic. When nailing these materials extra care should be taken to avoid inhalation and minimize skin contact. W ARNING: Some dust created by power sanding, sawing, grinding, ...
-
Harbor Freight Tools 97520 - page 6
SKU 94481 For technical questions, please call 1-800-444-3353 P AGE 6 TESTING THE FULL SEQUENTIAL SAFETY TRIP MECHANISM W ARNING: Even though the Nailer should be empty during this procedure, AL W A YS point the Nailer at a piece of scrap wood when testing. 1. Make sure the tool is disconnected from its air supply . 2. Completely empty the Magazine ...
-
Harbor Freight Tools 97520 - page 7
SKU 94481 For technical questions, please call 1-800-444-3353 P AGE 7 5. Connect the air supply to the tool at the Quick Connector (83). Set the regulator at the recommended 70 to 120 operating PSI. Do not exceed the maximum 120 PSI. 6. T est the tool by depressing the Safety (50A) against the workpiece without pulling the T rigger (36). The tool m ...
-
Harbor Freight Tools 97520 - page 8
SKU 94481 For technical questions, please call 1-800-444-3353 P AGE 8 3. While holding the Pusher (63) in place, press the Release (74) and slide the Pusher forward. OPERA TING THE NAILER 1. Attach the Nailer to the air supply at the Quick Coupler (83). Start your compressor and check the pressure, making sure it is set at the recommended 70-120 PS ...
-
Harbor Freight Tools 97520 - page 9
SKU 94481 For technical questions, please call 1-800-444-3353 P AGE 9 Anytime any maintenance or repairs are done (including clearing jams), FIRST : 1. Disconnect the Nailer from its air supply . 2. Empty the Magazine Assembly (70) completely . 3. Attempt to re the Nailer into a piece of scrap wood to ensure that it is disconected and is incapab ...
-
Harbor Freight Tools 97520 - page 10
SKU 94481 For technical questions, please call 1-800-444-3353 P AGE 10 1. Inspect the air supply Screen that is located in the End Cap (81) before each use, and clean or replace as necessary . Dirt and water in the air supply Screen are major causes of pneumatic tool wear . Use a lter in the compressed air system for better performance and longe ...
-
Harbor Freight Tools 97520 - page 11
SKU 94481 For technical questions, please call 1-800-444-3353 P AGE 1 1 NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts. P ARTS LIST PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUA ...
-
Harbor Freight Tools 97520 - page 12
SKU 94481 For technical questions, please call 1-800-444-3353 P AGE 12 ASSEMBL Y DIAGRAM ...
-
Harbor Freight Tools 97520 - page 13
SKU 94481 For technical questions, please call 1-800-444-3353 P AGE 13 90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the dat ...
¿Tienes una pregunta acerca de Harbor Freight Tools 97520?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Harbor Freight Tools 97520, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Harbor Freight Tools 97520 probablemente compartirá una forma de solucionarlo.