-
Boss Audio Systems MR218OUA - page 1
...
-
Boss Audio Systems MR218OUA - page 2
1 M R 2 1 8 0 U A OWNER’S MANUAL Mobile Audio System y PLL Synthesizer Stereo Radio y CD/MP3/WMA Player y RBDS Operation y Automatic Memory St oring y Preset Equalization y Electronic Shockproof (ESP) Function y USB Interface y Auxiliary Input Function y Remote Control ...
-
Boss Audio Systems MR218OUA - page 3
2 CONTENTS Inst allation ........................................... 3 T ake out screw before installation ......... 3 Wiring Conn ection .............................. 4 Operation ............................................. 5 Location of keys .................................... 5 Basic operat ion ..................................... 6 Switchin ...
-
Boss Audio Systems MR218OUA - page 4
3 INST ALLA TION Notes: y Choose the mounting location where the unit will not interfere with the normal driving function of the driver . y Before finally inst alling the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly . y Use only the part s included with the unit to ensu ...
-
Boss Audio Systems MR218OUA - page 5
4 WIRING CONNECTION Connector A 1. N.C. 2. N.C. 3. N.C. 4. MEMORY +12V (YELLOW) 5. AUTO ANTENNA OUTPUT (BLUE) 6. N.C. 7. +12V (TO IGNITION K EY) (RED) 8. GROUND (BLACK) Connector B 1. REAR RIGHT SPEAK ER (+) (VIOLET) 2. REAR RIGHT SPEAKER (-) (VIOLET/BLACK) 3. FRONT RIGHT SPEAKER (+) (GRA Y) 4. FRONT RIGHT SPEAKER (-) (GRA Y/BLACK) 5. FRONT LEFT SP ...
-
Boss Audio Systems MR218OUA - page 6
5 OPERA TION LOCA TION OF KEYS 1. EQ button 2. (power) button 3. Remote sensor 4. Liquid crystal display 5. BND/LOUD/ENT button 6. AS/PS button 7. DISP button 8. PTY button 9. MOD/SW button 10. AF/MUTE button 1 1. T A button 12. 6 DIR+ 13. 5 DIR- 14. 1-6 preset buttons 15. 4 SHF button 16. 3 RPT button 17. 2 SCN button 18. 1 P AU button 19. tune/se ...
-
Boss Audio Systems MR218OUA - page 7
6 OPERA TION BASIC OPERA TION SWITCHING ON/OFF THE UNIT Switch on the unit by pressing any button (except button (26)). When system is on, press button (2) to turn off the unit. F ACEPLA TE RELEASE Press OPEN button (27), then the faceplate will be folded down. SOUND ADJUSTMENT Press SEL button (21) shortly to select the desired adjustment m ode. T ...
-
Boss Audio Systems MR218OUA - page 8
7 OPERA TION ESP FUNCTION The unit can be shockproof about ten seconds. REMOTE SENSOR Point the remote control handset to the remote sensor (3). Press the function keys on the handset to control the system. RESET FUNCTION Reset button (25) must be activated with either a ballpoint pen or thin metal object. The reset button is to be activated for th ...
-
Boss Audio Systems MR218OUA - page 9
8 OPERA TION Then press / button (22&19), the unit will search the program automatically. If there is a corresponding program searched, the unit will play the program. ¾ When you set AREA EUR in system setting, pressing AF/MUTE button (10) can switch on or off RDS mode. CD/MP3/WMA OPERA TION SWITCHING T O CD MODE If there is no CD/MP3/WMA disc ...
-
Boss Audio Systems MR218OUA - page 10
9 OPERA TION BND/LOU/ENT button (5) to start playing the track. Searching Directory or File Name Press AS/PS button (6) for two ti mes. It enters into “Searching Directory or File Name” in Digital Audio CD. The unit searches files and directories that have the same character which is inputted by VOL +/- buttons (23&20). Explain as follo ...
-
Boss Audio Systems MR218OUA - page 11
10 OPERA TION operation may cause file loss. And our company assumes no responsibility for this. DISC NOTES A. Notes on discs: 1. Attempting to use non-standard shape discs (e.g. square, start, heart) may damage the unit. Be sure to use round shape CD discs only for this unit. 2. Do not stick paper or t ape, etc, onto the label side or the recordin ...
-
Boss Audio Systems MR218OUA - page 12
11 REMOTE CONTROL 1. VO L+ : V ol um e U p Bu t ton (Character Se lect ( A, B~8,9,0, _, -, +) For MP3/WMA Operation) 2. : Power ON/OFF Butto n 3. SEL: Sound Mode Select Button (Characte r Shift Right For MP3/WMA Operation) 4. TUNE/SKIP : T une/Seek Down Button 5. DISP: Display Button 6. V OL- : V o lume Down B ut ton (Cha racter Select (A,B~8,9,0, ...
-
Boss Audio Systems MR218OUA - page 13
12 SPECIFICA TION GENERAL Power Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 160 (D) x 50 (H) T one Controls - Bass (at 100 Hz) : ±10 dB - T reble (at 10 kHz) : ±10 dB M a x i m u m O u t p u t P o w e r : 4 x 8 0 w a t t s C u r r e n t D r a i n : 15 Ampere (max.) CD PLA Y ER Signal to Noise Ratio : More th ...
-
Boss Audio Systems MR218OUA - page 14
13 TROUBLE SHOOTING Before going through the checklist, check wir ing connection. If any of the problems persist after checklist has been made, consult your nearest service dealer . Symptom Cause Solution No power . The ignition switch is not on. If the power supply is connected to the car accessory circuits, but the engine is not moving, switch th ...
¿Tienes una pregunta acerca de Boss Audio Systems MR218OUA?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Boss Audio Systems MR218OUA, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Boss Audio Systems MR218OUA probablemente compartirá una forma de solucionarlo.