-
Delta 50-770 - page 1
INSTRUCTION MANUAL Portable Single-Stage Dust Collector (Model 50-770) P ART NO. 902117 (015) Copyright © 2001 Delta Machinery ESP AÑOL: PÁGINA 15 T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3582). ...
-
Delta 50-770 - page 2
2 GENERAL SAFETY RULES W oodworking can be dangerous if safe and pr oper operating procedur es ar e not followed. As with all machinery , ther e are certain hazar ds involved with the operation of the pr oduct. Using the machine with respect and caution will considerably lessen the possibility of personal injury . However , if normal safety precaut ...
-
Delta 50-770 - page 3
3 IMPOR T ANT SAFETY RULES FOR DUST COLLECTORS W ARNING: Basic pr ecautions should always be followed when using your dust collector . T o reduce the risk of injury , electrical shock or fire, comply with the safety rules listed below: 1. DO NOT leave the dust collector plugged into the electrical outlet. Unplug dust collector from the outlet when ...
-
Delta 50-770 - page 4
4 UNP ACKING AND CLEANING Carefully unpack the tool and all loose items fr om the shipping container(s). Remove the pr otective coating from all unpainted surfaces. This coating may be removed with a soft cloth moistened wi th ke r osene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces ...
-
Delta 50-770 - page 5
5 ASSEMBL Y ASSEMBLING WHEEL CASTERS 1. Remove the hex nut and lockwasher from each of the four wheel casters. 2. Place the dust collector on its side. 2. Insert bolt from wheel caster thr ough the four holes (A) Fig. 3 in the base of the dust collector . 3. Place a lockwasher (A) Fig. 4 onto each bolt. 4. Thread hex nut (B) Fig. 4 onto each of the ...
-
Delta 50-770 - page 6
6 ASSEMBLING DUSTPOR T TUBE AND CONNECTOR TO DUST COLLECTOR BODY 1. Place tube clamp (A) Fig. 7 on the lower support tube holder (B). 2. Insert the tube support bracket (A) into the tube support holder (B) as shown in Fig. 8. 3. Place a tube clamp (A) onto the lower tube support as shown in Fig. 9. Fig. 7 A B Fig. 8 A B Fig. 9 A ...
-
Delta 50-770 - page 7
7 4. Align the two holes in the intake support angle brace (A) Fig. 10 with the two holes in the intake funnel (B). 5. Fasten the intake support angle brace to the intake funnel by inserting the two 5/16-18x5/8" button head carriage bolts (C) thru the intake funnel (B) and the intake support angle brace (A) as shown in Fig. 11. 6. Place a 5/16 ...
-
Delta 50-770 - page 8
8 ASSEMBLING V ACUUM HOSE TO DUST COLLECTOR 1. Place the intake cap holder (D) on the dust collector as shown in Fig. 15. NOTE: DO NOT COVER THE INT AKE POR T WITH THE INT AKE CAP WHEN A TT ACHING THE HOSE TO THE INT AKE PORT . 2. Place hose clamp (A) Fig. 15, onto one end of vacuum hose (B) and slide hose around intake port (C) as shown in Fig. 16 ...
-
Delta 50-770 - page 9
9 Fig. 17 Fig. 18 Fig. 19 Fig. 20 3. Place the remaining hose clamp (A) Fig. 17, around the other end of vacuum hose (B) and slide hose (B) onto intake funnel (C) and tighten hose clamp (A). NOTE: If desired, intake funnel (C) can be r otated to the vertical position, as shown in Fig. 18. ASSEMBLING DUST BAG TO DUST COLLECTOR Loosely thread end of ...
-
Delta 50-770 - page 10
10 Fig. 19 Fig. 20 GROUNDED OUTLET BOX CURRENT CARR YING PRONGS GROUNDING BLADE IS LONGEST OF THE 3 BLADES GROUNDED OUTLET BOX GROUNDING MEANS ADAPTER Fig. 21 120 VOL T , SINGLE PHASE OPERA TION This tool must be grounded while in use to pr otect the operator from electric shock. The motor recommended for use with your dust collector is shipped wir ...
-
Delta 50-770 - page 11
11 OPERA TING CONTROLS & ADJUSTMENTS WARNING: FOR OPERA TOR SAFETY , MAKE CERT AIN THE DUST INT AKE PORT IS COVERED WITH THE V ACUUM HOSE BEFORE OPERA TING THE MACHINE. THE ROT A TING F AN INSIDE THE BLOWER HOUSING IS ACCESSIBLE THROUGH THE DUST INT AKE PORT AND IS HAZARDOUS. MAKE SURE INT AKE CAP COVERS THE INT AKE PORT WHEN HOSE IS REMOVED. A ...
-
Delta 50-770 - page 12
12 OPERA TIONS This versatile dust collector is light, compact and can easily be transported to a variety of locations for use in and out of the workshop. This dust collector can be used with many differ ent types of woodworking machinery as shown in Figs. 26, 27, and 28. This dust collector shows its versatility in the way that the intake port can ...
-
Delta 50-770 - page 13
13 TRANSPOR T A TION AND STORAGE 1. The dust collector features a convenient carrying handle with rubber grip (A) Fig. 29, which allows the unit to be carried easily from one job ar ea to another . IMPORT ANT : THE DUST COLLECTOR WEIGHS APPROXIMA TEL Y 46 LBS. CARE SHOULD BE T AKEN WHEN LIFTING AND TRANSPORTING THE MACHINE . 2. In addition to the c ...
-
Delta 50-770 - page 14
14 Printed in U.S.A. P AR TS, SERVICE OR WARRANTY ASSIST ANCE All Delta Machines and accessories are manufactur ed to high quality standar ds and are serviced by a network of Porter -Cable • Delta Factory Service Centers and Delta Authorized Service Stations. T o obtain additional information regar ding your Delta quality pr oduct or to obtain pa ...
¿Tienes una pregunta acerca de Delta 50-770?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Delta 50-770, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Delta 50-770 probablemente compartirá una forma de solucionarlo.