-
Electrolux ESF 66814 - page 1
ESF 66814 .............................. .................. ................ ............ .......... ....... EN DISHWASHER USER MANUAL ...
-
Electrolux ESF 66814 - page 2
Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information 2 Product description 4 Control panel 5 Use of the appliance 7 Setting the water softener 7 Use of dishwasher salt 8 Use of detergent and rinse aid 9 Multitab function 10 Loading cutlery and dishes 10 Setting and starting a washing program 11 W ...
-
Electrolux ESF 66814 - page 3
• Always close the door when you do not use the appliance to prevent injury and not to stumble over the open door. • Do not sit or stand on th e open door. CHILD SAFETY • Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge use th e appliance. They must have supervi ...
-
Electrolux ESF 66814 - page 4
PRODUCT DESCRIPTION 1 2 3 4 5 6 7 8 9 1 Upper basket 2 Air vent and water hardness dial 3 Salt container 4 Detergent dispenser 5 Rinse aid dispenser 6 Rating plate 7 Filters 8 Lower spray arm 9 Upper spray arm INTERNAL LIGHT This appliance has an intern al light that comes on when you open the door and goes off when the door is closed. Warning! Vis ...
-
Electrolux ESF 66814 - page 5
CONTROL PANEL The controls are on the top of the con- trol panel. To operat e with the controls keep the appliance door ajar. 1 2 3 45 6 7 8 9 10 1 On/off button 2 Display 3 Delay start button 4 Program button (do wn) 5 Program button (up) 6 Energy saver button 7 Multitab button 8 Reset button 9 Indicators 10 Program-display Indicators Salt indicat ...
-
Electrolux ESF 66814 - page 6
THE DISPLAY The display shows: • The electronic adjustment of the level of the water softener • The activation and deactivation of the rinse aid dispenser (o nly with the multita b function on) • The number of the wash ing program • The remaining time to the end of the washing program • The end of a washing program (the dis- play shows a ...
-
Electrolux ESF 66814 - page 7
• You adjust electron ically the level of the water softener. • The appliance has a malfunction. Factory setting: aco ustic signals active. Deactivating the acoustic signals 1. Switch on the appliance. Make sure that the appliance is in setting mode. 2. Press and hold button (4) and button (5) at the same time until the indicators of buttons (3 ...
-
Electrolux ESF 66814 - page 8
Water hardness Water hardness setting mg/l ppm mmol/l manually electronically < 70 < 70 < 0.7 1 1 1) 1) No use of salt required. You must set the water softener man- ually and electronically. MANUAL ADJUSTMENT The appliance is set at the factory at position 2. 1. Remove the lower basket. 2. Turn the water hardness dial to position 1 or 2 ( ...
-
Electrolux ESF 66814 - page 9
It is normal that water overflows from the salt container when you fill it with salt. USE OF DETERGENT AND RINSE AID 20 30 M A X 1 2 3 4 + - 1 2 3 4 5 6 7 USE OF DETERGENT Caution! Only use detergents (powder, liquid or tablet) that are suitable for dishwashers. Follow the recommendations on the detergent packagin g for the use and storage of the d ...
-
Electrolux ESF 66814 - page 10
MULTITAB FUNCTION The multitab function is for combi detergent tablets. These tablets contain agents as detergent, rinse aid and dishwash er salt. Some types of tablets can contain other agents. Be sure that these tablets are suitable for the water hardness in your area (refer to the instructions on the p ackaging of the prod- ucts). The multitab f ...
-
Electrolux ESF 66814 - page 11
SETTING AND STARTING A WASHING PROGRAM STARTING THE WASHING PROGRAM WITHOUT DELAY START 1. Switch on the appliance. Make sure that the appliance is in setting mode. 2. Set the wash ing program. • The num ber related to th e washing program flashes in the display. 3. Close the appliance door, the washing program starts. STARTING THE WASHING PROGRA ...
-
Electrolux ESF 66814 - page 12
WASHING PROGRAMS Program Type of soil Type of load Program de scription Function 1 1) All Crockery, cutlery, pots and pans Prewash Wash 45 °C or 70 °C Rinses Dry Energy saver 2 Heavy soil Crockery, cutlery, pots and pans Prewash Wash 7 0 °C Rinses Dry Energy saver 3 2) Fresh soil Crockery and cut- lery Wash 6 0 °C Rinse 4 3) Normal soil Crocker ...
-
Electrolux ESF 66814 - page 13
Program Program time (mi - nute) Energy (kWh) Water (litre) 4 105 - 115 0.67 - 0.81 9.6 - 11.6 5 50 - 60 1.0 - 1.2 10 - 11 6 70 - 80 0.8 - 0.9 11 - 12 7 14 0.05 4 The water pressure and temperature, the variations of the mains supply and the quantity of dish es can change the consumption val ues. CARE AND CLEANING Warning! Switch the appliance off ...
-
Electrolux ESF 66814 - page 14
C 8. Put filter (A) into position in filter (B) and turn it clockwise until it locks. CLEANING THE SPRAY ARMS Do not remove the spray arms. If the holes in the spray arms become clog- ged, remove remaining parts of soil with a thin pointed object. EXTERNAL CLEANING Clean the external surfaces of the appli ance and control panel with a damp soft clo ...
-
Electrolux ESF 66814 - page 15
Malfunction Possible cause Possible solutio n The water tap is blocked or restric- ted with lime scale. Clean the water ta p. The water pressure is too low. Contact your local water authority. The appliance does not drain the water There is a blockage in the sink spi- got. Clean the sink spigot. The installation of the water drain hose is not corre ...
-
Electrolux ESF 66814 - page 16
Problem Possible cause Possible solu tion The salt container cap is not closed correctly. Ensure that the salt container cap is correctly closed. There are streaks, milky stains, or a bluish layer on glasses and dishes. Rinse aid dosage is too high. Decrease the rinse aid dosage. Dry water drop stains on glasses and dishes. Rinse aid dosage is t oo ...
-
Electrolux ESF 66814 - page 17
TECHNICAL DATA Dimensions Width Height Depth 596 mm 818 - 878 mm 580 mm Electrical connection Voltage Overall power Fuse Frequency 220-240 V 2200 W 10 A 50 Hz Water supply pressure min. max. 50 kPa (7 psi) 800 kPa (116 psi) Capacity Place settings 13 INSTALLATION If oor is not level, adjust levelling legs to suit The hos e s houl d not be extend ...
-
Electrolux ESF 66814 - page 18
ADHESIVE STEAM PROTECTION FOIL Fit the steam protection on t he front part o f the kitchen counter along the entire width. 600 mm ADJUSTING THE HEIGHT OF THE APPLIANCE 1. Remove the adjustable plinth. 2. – To lift the front of th e appliance, turn the two front feet counterclockwise. – To lift the rear of the appliance, turn the middle screw co ...
-
Electrolux ESF 66814 - page 19
x4 2. Fix laterally the appliance with the spacers and the screws supplied. Make sure that the sc rews are tight. Once the installation is completed, make sure that the bottom of the adjustable plinth is aligned with the ground. CUSTOM MADE KICK-PANEL For integrated applian ces and full-stainless- steel door appliances. We recommend that you make a ...
-
Electrolux ESF 66814 - page 20
WATER CONNECTION WATER INLET HOSE Connect the appliance to a cold water sup- ply. Connect the inlet hose to a water tap with an external BSP thread spout of 3/4”. Once connected the inle t hose to th e water tap, turn the tap on and check that there are no leaks. Inlet water supply • Cold water pressur e: 800 kPa max - 50 kPa min. • Water flo ...
-
Electrolux ESF 66814 - page 21
ELECTRICAL CONNECTION Warning! • The manufacturer accepts n o liability for failure to observe the below safe- ty precautions. • Safety standards require the appli- ance to be earthed. • Prior to using the appliance for the first time, ensure that the rated volt- age and type of supply on the rating plate match that of the supply where the ap ...
-
Electrolux ESF 66814 - page 22
WARRANTY FOR SALES IN AUSTRALIA A ND NEW ZEALAND APPLIANCE : DISHWASHER This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an im- portant document. Please keep it with your proof of purch ase documents in a safe place for future reference should you require service for your Appliance. 1. In th ...
-
Electrolux ESF 66814 - page 23
7. You may not make a claim under this warranty unless the defect claimed is due to faulty or def ective parts or work- manship. Electrolux is not liable in the following situations (which are not ex- haustive): a) the Appliance is damaged by: – accident – misuse or abuse, including failure to properly maintain or service – normal wear and te ...
-
Electrolux ESF 66814 - page 24
FOR SERVICE or to find the address of your nearest state service cent re in Australia Please call 13 13 4 9 For the cost of a lo cal call (Aust ralia on- ly) SERVICE AUSTRALIA ELECTROLUX HOME PRODUCTS www.electrolux.com.au FOR SPARE PARTS or to find the address of your nearest state spare parts cen- tre in Aust ralia Please call 13 13 50 For the co ...
-
Electrolux ESF 66814 - page 25
electrolux 25 ...
-
Electrolux ESF 66814 - page 26
26 electrolux ...
-
Electrolux ESF 66814 - page 27
electrolux 27 ...
-
Electrolux ESF 66814 - page 28
www.electrolux.com 11793489 2-B-512011 ...
¿Tienes una pregunta acerca de Electrolux ESF 66814?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Electrolux ESF 66814, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Electrolux ESF 66814 probablemente compartirá una forma de solucionarlo.