-
PocketWizard Pocket Wizard Plus III - page 1
Quick Guide FCC/IC: 340.00 - 354.00 MHz CE: 433.42 - 434.42 MHz IMPORT ANT : FCC/Canada frequency radios are NOT compatible with CE frequency radios and vice versa. P ocketWizard.com/wheretobuy/frequency The Plus III is a radio transceiver , capable of acting as a transmitter or receiver for triggering remote ashes and cameras. It requires at le ...
-
PocketWizard Pocket Wizard Plus III - page 2
Internal Antenna (PG. 13) Backlit LCD (PG. 4) T est Button (T wo Stage T rigger) (PG. 12) Power/MODE Button (PG. 5) Zone T oggle Buttons (A, B, C, D) (PG. 11) Status LED (PG. 12) Channel Up/Down Buttons (PG. 11) Hot Shoe with Locking Ring (PG. 5) READ ME FIRST : T r ansceiver • All equipment should be turned OFF when making connections, otherwise ...
-
PocketWizard Pocket Wizard Plus III - page 3
INCLUDED IN BOX: Lanyard Loop USB Connector (PG. 12) Flash/Camera Port (PG. 5, 6, 7, 8) Battery Door Latch Battery Door (PG. 4) 1/4 - 20 Mount T r ansceiver • Plus III T ransceiver • Locking PC Sync Cable • Lany ard • 3.5mm (1/8” Miniphone) Cable • Quick Guide • 6.35mm (1/4” Phone) Adapter The included cables and adapter are for you ...
-
PocketWizard Pocket Wizard Plus III - page 4
T r ansceiver Battery Level (PG. 4) Channel (PG. 11) T riggering Mode (PG. 9, 10) Half/Full Press Indicator (PG. 7, 12) Selected Zones (PG. 11) Note proper polarity when installing batteries. • Always turn OFF all equipment (PocketWizard ® radios, electronic ashes, cameras, etc.) before making connections or replacing batteries. • The Plus ...
-
PocketWizard Pocket Wizard Plus III - page 5
T r ansceiver Connecting: Connect a Plus III to your camera via the hot shoe. This will be your transmitting radio. Connect a Plus III to each of your remote ashes using the appropriate sync cable. Th es e w il l b e yo ur re ce iv i ng r ad i os . If you are using a camera with no hot shoe, or the hot shoe cannot be used, connect the transmitti ...
-
PocketWizard Pocket Wizard Plus III - page 6
T riggering a Remote Flash with your Plus ® III T ransceiver Remote Flash T riggering 1. Attach a Plus III to your camera’ s hot shoe. Y ou may also connect the Plus III radio to your camera’ s PC sync port using the included cable. 2. Connect a Plus III to your remote ash via the appropriate sync cable. 3. Select Channel and Zone A, B, C, ...
-
PocketWizard Pocket Wizard Plus III - page 7
7 Remote Camera T riggering T riggering a Remote Camera with your Plus ® III T ransceiver 1. Connect Plus III to your remote camera via the appropriate remote camera cable. 2. Select Channel and Zone A, B, C, or D via the Channel Up/Down Buttons and Zone T oggle Buttons. 3. Press the TEST button on the transmitting PocketWizard radio or re the ...
-
PocketWizard Pocket Wizard Plus III - page 8
Using Auto-Relay 1. Set the transmitting PocketWizard radio in your hands to a desired channel and zone. 2. Set the relaying Plus III for your remote camera to the same ch an n el as the radio in your hands and set T riggering Mode to TxRx . 3. Connect the relaying Plus III’ s Flash/Camera Port to the remote camera triggering port of the camera v ...
-
PocketWizard Pocket Wizard Plus III - page 9
T riggering Modes Modes of Operation Y our Plus ® III T ransceiver supports six modes of triggering for different applications. Y ou can switch between modes by pressing and quickly releasing the MODE button. TxRx Mode allows the radio to be used as a transmitter attached to a camera or as a receiver connected to a rem ote ash or remote camera. ...
-
PocketWizard Pocket Wizard Plus III - page 10
T riggering Modes and receiving radios. Use this mode when triggering remote cameras at greater distances. It can also be used with remote ash, but there may be a reduction in maximum X-sync speed. RP (Repeater) Mode automatically retransmits any triggers received on the selected channel, increasing the maximum triggering distance when a Plus ® ...
-
PocketWizard Pocket Wizard Plus III - page 11
Channels Using Zones The Plus ® III T ransceiver supports 32 different Standard Channels. Each Standard Channel represents a digital code transmitted on specic PocketWizard radio frequencies. This enables many photographers to work in the same area or for one photographer to exclusively control different sets of receivers. A Plus III will trigg ...
-
PocketWizard Pocket Wizard Plus III - page 12
Other Functions Status LED TEST Button (T wo Stage T rigger) Reset USB The Plus III’ s status LED will blink in three different colors: Green, Red and Amber . Green Blinking indicates good battery life Amber Blinking indicates the batteries are getting low or when TEST button is half-pressed Red Blinking indicates batteries are critically low and ...
-
PocketWizard Pocket Wizard Plus III - page 13
Whenever possible, maintain a line of sight between radios and keep antennas parallel. Make sure radios are not near any large metal, concrete, or high water -content objects. People and trees are mostly water! Make sure radios are not blocked by these objects or by hills. The Plus III T ransceiver’ s antenna is fairly omnidirectional and its ori ...
-
PocketWizard Pocket Wizard Plus III - page 14
Specications T echnical Information Frequency: Plus ® III FCC/IC: 340.00 – 354.00 MHz Plus ® III CE: 433.42 – 434.42 MHz T ransmit Output Power: Less than 1 milliwatt (1/1000 of a watt) Batteries: 2 x AA (IEC:LR6) T riggering Delay: 1/1200 of a second Bandwidth: Narrowband 70KHz T ransmit 230KHz Receive Operating T emperature: Above -15° ...
-
PocketWizard Pocket Wizard Plus III - page 15
P ocketWizard.com Information in this Quick Guide is subject to change. For current operatingdocumentation, features, specicationsandcompatibility , visit wiki.PocketWizard.com. © 2011 LPA Design. All rights reserved. Product features and specications are subject to change without notice. PocketWizard, ControlTL, MiniTT1, F ...
-
PocketWizard Pocket Wizard Plus III - page 16
10937 v1.0 WARNING The FCC wants you to know: Cha ngesormodicationstothisunitnotexpresslyapprovedb ythe partyresponsibleforcompliancecouldvoidtheuser’ sauthorityto operatethisequipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B dig ...
¿Tienes una pregunta acerca de PocketWizard Pocket Wizard Plus III?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con PocketWizard Pocket Wizard Plus III, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con PocketWizard Pocket Wizard Plus III probablemente compartirá una forma de solucionarlo.