Español dropdown-ico

Manual de instrucciones Heatiator NDI30-SPFK

42 de páginas 2.8 mb
Descargar

Pasar a la página of 42

Summary
  • Heatiator NDI30-SPFK - page 1

    1 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 Models: NDI30 NDI30-SP NDI35 NDI35-SP NDI30-SPFK NDI35-SPFK • DO NOT store or use gasoline or other fl am- mable vapors and liquids in the vicinity of this or any other appliance. • What to do if you smell gas - DO NOT try to light any ap ...

  • Heatiator NDI30-SPFK - page 2

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 2 Listing Label Information/Location Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location on fi replace: _____________________ De ...

  • Heatiator NDI30-SPFK - page 3

    3 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury . • CAUT ...

  • Heatiator NDI30-SPFK - page 4

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 4 B. Limited Lifetime W arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for H ...

  • Heatiator NDI30-SPFK - page 5

    5 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 B. Limited Lifetime W arranty (continued) 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS:  7KLVZDUUDQWRQOFRYHUV++7DSSOLDQFHVWKDWDUHSXUFKDVHGWKURXJKDQ++7 DXWKRUL]HGGHDOHURUGLVWULEXWRU ? ...

  • Heatiator NDI30-SPFK - page 6

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 6 C. BTU Specifi cations MODELS: NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK LABORA TOR Y : Underwriters Laboratories, Inc. (UL) TYPE: V ented Gas Fireplace Heater STANDARD: ANSI Z21.88-2009 CSA 2.33-2009 V ented Gas Fireplace He ...

  • Heatiator NDI30-SPFK - page 7

    7 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 2 Operating Inst ruct ions Figure 2.1 General Operating Parts B. Y our Fireplace W ARNING! DO NOT operate fi replace before read- ing and understanding operating instructions. Failure to operate fi replace according to operating instructions ...

  • Heatiator NDI30-SPFK - page 8

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 8 C. Clear Space W ARNING! DO NOT place combustible objects in front of the fi replace or block louvers. High temperatures may start a fi re. See Figure 2.2. Avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may ...

  • Heatiator NDI30-SPFK - page 9

    9 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 H. Lighting Instructions (IPI) The IPI system may be operated with two D-cell batteries. When using batteries, unplug the transformer . T o prolong battery life, remove them when using the transformer . 1. This appliance is equipped with an ig ...

  • Heatiator NDI30-SPFK - page 10

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 10 1. T urn off all electric power to the appliance if ser- vice is to be performed. 2. Open control access panel. 3. Move switch to “OFF” position. 4. Push in gas control knob slightly and turn clock- wise to OFF”. DO NOT force. 5. Close ...

  • Heatiator NDI30-SPFK - page 11

    11 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 Initial Break-in Procedure • The appliance should be run three to four hours continuously on high. • T urn the appliance off and allow it to completely cool. • Remove fi xed glass assembly . See Section 12.H. • Clean fi xed glass as ...

  • Heatiator NDI30-SPFK - page 12

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 12 Glass Cleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle fi xed glass assembly with care. Glass is breakable. • Avoid striking, scratching o ...

  • Heatiator NDI30-SPFK - page 13

    13 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 V enting Frequency: Seasonally By: Homeowner T ools needed: Protective gloves and safety glasses. • Inspect venting and termination cap for blockage or obstruction such plants, bird nests, leaves, snow , debris, etc. • V erify termination ...

  • Heatiator NDI30-SPFK - page 14

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 14 Figure 3.1 Standing Pilot Flame Patterns Burner Ignition and Operation Frequency: Annually By: Service T echnician T ools needed: Protective gloves, vacuum cleaner , whisk broom, fl ashlight, voltmeter , indexed drill bit set, and a manomete ...

  • Heatiator NDI30-SPFK - page 15

    15 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 A. T ypical Appliance System NOTICE: Illustrations and photos re fl ect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual VERTICAL TERMINA ...

  • Heatiator NDI30-SPFK - page 16

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 16 B. Design and Installation Considerations Heatilator gas inserts are designed for installations into solid fuel masonry or factory built fi replaces that have been installed in accordance with the National, Provin- cial, State and local buil ...

  • Heatiator NDI30-SPFK - page 17

    17 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 5 F ireplace Si ze Requ irements Figure 5.1 Fireplace Opening In addition to these dimensions, also reference Clearances and Mantel Projections (Section 5.B). E D C I B A G H F MINIMUM FIREPLACE SIZE Location NDI35 NDI30 Inches Millimeters In ...

  • Heatiator NDI30-SPFK - page 18

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 18 B. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as speci fi ed. Framing or fi nishing material closer than the minimums listed must be construct- ed entirely of noncombustible mat ...

  • Heatiator NDI30-SPFK - page 19

    19 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 A. V ent T ermination Minimum Clearances Roof Pitch H (Min.) Ft. Flat to 6/12...........................................................1.0* Over 6/12 to 7/12 .................................................1.25* Over 7/12 to 8/12 .......... ...

  • Heatiator NDI30-SPFK - page 20

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 20 7 Installation Preparation Prepare the existing solid fuel masonry or factory built non-combustible fi rebox for installation. A. Inspection and Cleaning Prior to installing the gas insert: • Have the chimney and adjacent structure inspect ...

  • Heatiator NDI30-SPFK - page 21

    21 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 B. V enting Components CAUTION! Risk of Cuts/Abrasions/Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp. The vertical vent termination system installed on this model includes: • Fle ...

  • Heatiator NDI30-SPFK - page 22

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 22 Figure 8.2 CUT AND BEND FLASHING AS NEEDED TO FIT CHIMNEY SEALANT ADHESIVE • T rim chimney top plate to minimize excess overhang or bend over fl ue tile (see Figure 8.2). • Place 3/8 inch bead of 300º F silicone on fl ue tile top. D. P ...

  • Heatiator NDI30-SPFK - page 23

    23 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 F . Installing Adaptor and T ermination Cap For installation of termination cap see minimum vent heights for various pitched roofs (see Figure 8.4) . T o install adaptor see Figure 8.5. Roof Pitch H (Min.) Ft. Flat to 6/12.................... ...

  • Heatiator NDI30-SPFK - page 24

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 24 A. Fuel Conversion • Make sure the appliance is compatible with available gas types. • Conversions must be made by a quali fi ed technician (NFI certifi ed or factory-trained) using Hearth & Home T echnologies specifi ed and approv ...

  • Heatiator NDI30-SPFK - page 25

    25 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 B. Standing Pilot Ignition System Wiring • The standing pilot ignition system wiring DOES NOT require a 120 V AC supply to operate. • T o power appliance with 120V AC to operate a fan or remote control, an outlet box may be installed in a ...

  • Heatiator NDI30-SPFK - page 26

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 26 TRANSFORMER 3 V AC TO CORD ASSEMBL Y 1 10V BLACK RED ORANGE GREEN VA LV E IGNITION MODULE 3 V AC INTERMITTENT PILOT IGNITOR I S GROUND TO FIREPLACE CHASSIS BA TTERY P ACK ORG WHT W ALL SWITCH OR REMOTE CONTROL BRN BRN ON/OFF SWITCH ON OFF NOT ...

  • Heatiator NDI30-SPFK - page 27

    27 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 Figure 10.5 Fan Wiring Diagram BLOWERS BLOWER RECEPT ACLE BLK GRN BLK BLK GRN BLK WHT GRN BLK BLK GRN WHT BLK BLK BLK BLK PLUG INTO 120V EXISTING OUTLET TEMPERA TURE SENSOR SWITCH V ARIABLE SPEED CONTROL DC REGULA TOR RECEPT ACLE PLUG 120V EX ...

  • Heatiator NDI30-SPFK - page 28

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 28 E. Installation for Fan (Optional) On units already installed, removal of decorative front, surround and gas insert is required. • Detach fl exible liner from back of unit if insert is installed. • Remove the four screws on the cover pla ...

  • Heatiator NDI30-SPFK - page 29

    29 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 11 F inishing A. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as speci fi ed. Framing or fi nishing material closer than the minimums listed must be construct- ed entirely of nonc ...

  • Heatiator NDI30-SPFK - page 30

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 30 A. Remove Glass Assembly See Section 12.H. B. Remove the Shipping Materials Remove shipping materials from inside or underneath the fi rebox. C. Clean the Appliance Clean/vacuum any sawdust that may have accumulated inside the fi rebox or u ...

  • Heatiator NDI30-SPFK - page 31

    31 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 G. Install the Log Assembly Log Set Assembly: LOGS-NDI30 Models: NDI30, NDI30-SP Log #1 (SRV2226-701) Position Log #1 as shown in Figure 2. Note additional placement instructions in Figure 1. Set the rear log (Log #1) on the log shelf. Positi ...

  • Heatiator NDI30-SPFK - page 32

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 32 Log #4 (SRV2226-703) : Position Log #4 as shown in Figure 7. See Figure 1 and Figure 2 for additional details. Place the top end of log #4 on the fl at spot of Log #1. Position the forked end of Log #4 around the far left grate tine. Rotate ...

  • Heatiator NDI30-SPFK - page 33

    33 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 G. Install the Log Assembly Log Set Assembly: LOGS-NDI35 Models: NDI35, NDI35-SP CAUTION: Logs are fragile, handle with care. Log #1 (SRV2224-701) Position Log #1 as shown in Figure 3. Note additional references in Figure 2. Set the log on th ...

  • Heatiator NDI30-SPFK - page 34

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 34 2224-935 Log #4 (SRV2224-703) : Position Log #4 as shown in Figure 8. See Figure 2 and Figure 3 for additional details. Place the top end of log #4 on the fl at spot of Log #1. Position Log #4 so the groove located on the right side of the f ...

  • Heatiator NDI30-SPFK - page 35

    35 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 I. Air Shutter Setting Air shutter settings should be adjusted by a qualifi ed ser- vice technician at the time of installation. The air shutter is set at the factory for minimum vertical vent run. Adjust air shutter for longer vertical runs ...

  • Heatiator NDI30-SPFK - page 36

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 36 A. Standing Pilot Ignition System 13 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a ...

  • Heatiator NDI30-SPFK - page 37

    37 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 T roubleshooting (continued) Symptom Possible Cause Corrective Action 3. (Continued) C. V alve. T urn the valve knob to the ON position. Place the ON/ OFF switch in the ON position. T ake a reading with a millivolt meter at the thermopile ter ...

  • Heatiator NDI30-SPFK - page 38

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 38 B. IntelliFire Ignition System Symptom Possible Cause Corrective Action 1. Pilot won’t light. The ignitor/module makes noise, but no spark. A. Incorrect wiring. V erify “S” wire (white) for sensor and “I” wire (orange) for ignitor a ...

  • Heatiator NDI30-SPFK - page 39

    39 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 Symptom Possible Cause Corrective Action 4. Pilot lights but contin- ues to spark, and main burner will not ignite. (If the pilot continues to spark after the pilot fl ame has been lit, fl ame rectifi cation has not occurred.) A. A shorted ...

  • Heatiator NDI30-SPFK - page 40

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 40 14 R eference Materials A. Appliance Dimension Diagram Dimensions are actual appliance dimensions. Use for reference only. Figure 14.1 Appliance Dimensions A H B C D E I G F N M L K J O R Q P S GAS LINE ACCESS ELECTRICAL ACCESS T MODEL DIMENS ...

  • Heatiator NDI30-SPFK - page 41

    41 Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 B. V ent Kits Components Direct V ent Flex Liner Kits (see Figure 14.2) LINK-DV30B: Masonry 3 inch fl ex liner kit. Expands to 30 feet. Includes: two liners, termination cap, fl ashing, and link adapter . LINK-DV4-30B: Masonry 3 inch fl ex ...

  • Heatiator NDI30-SPFK - page 42

    Heatilator • NDI30, NDI30-SP , NDI35, NDI35-SP , NDI30-SPFK, NDI35-SPFK • 2226-900 Rev . G • 4/1 1 48 Heatilator , a brand of Hearth & Home T echnologies Inc. 7571 215 th Street West, Lakeville, MN 55044 www .heatilator .com D. Contact Information Please contact your Heatilator dealer with any questions or concerns. For the location of yo ...

Fabricante Heatiator Categoría Gas Heater

Los documentos del dispositivo Heatiator NDI30-SPFK que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Heatiator
- manuales de instrucciones NDI30-SPFK
- hojas de producto Heatiator
- folletos informativos
- o etiquetas energéticas Heatiator NDI30-SPFK
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Heatiator NDI30-SPFK.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Heatiator NDI30-SPFK, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Heatiator NDI30-SPFK. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Heatiator NDI30-SPFK.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Heatiator NDI30-SPFK, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Heatiator NDI30-SPFK. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Heatiator NDI30-SPFK.

El manual de instrucciones completo de Heatiator debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Heatiator NDI30-SPFK - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Heatiator NDI30-SPFK, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Heatiator NDI30-SPFK que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Heatiator NDI30-SPFK - que deben facilitarnos los primeros pasos durante el uso de Heatiator NDI30-SPFK
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Heatiator NDI30-SPFK
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Heatiator NDI30-SPFK en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Heatiator NDI30-SPFK?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Heatiator NDI30-SPFK, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Heatiator NDI30-SPFK probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)