-
Ryobi AG401 - page 1
OPERA T OR'S MANUAL 4 in. (100 mm) Angle Grinder Model AG401 / Double Insulated SA VE THIS MANUAL FOR FUTURE REFERENCE THANK YOU FOR BUYING A RYOBI ANGLE GRINDER. Your new angle grinder has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give ...
-
Ryobi AG401 - page 2
Page 2 Product Specifications ......................................................................................................... ......................... 1 Introduction ................................................................................................................................................... 2 Rules for S ...
-
Ryobi AG401 - page 3
Page 3 RULES FOR SAFE OPERA TION of inattention while operating power tools may result in serious personal injury . Dress properly . Do not wear loose clothing or jewelry . Contain long hair . Keep your hair , cloth- ing, and gloves away from moving parts. Loose clothes, jewelry , or long hair can be caught in moving parts. A void accidenta ...
-
Ryobi AG401 - page 4
Page 4 RULES FOR SAFE OPERA TION Dust and waste materials should not be allowed to build up in the workshop. Hot metal sparks could start a fire. Do not enlarge or alter the center hole of the grinding wheel as this could result in breaking it. Use only the normal grinder surface. Never use the side or upper surfaces for cutting. Ke ...
-
Ryobi AG401 - page 5
Page 5 Inspect for and remove all foreign objects from workpiece before grinding. Following this rule will reduce the risk of serious personal injury. Drugs, Alcohol, Medication. Do not operate tool while under the influence of drugs, alcohol, or any medication. Following this rule will reduce the risk of electric shock, fire, or serious in ...
-
Ryobi AG401 - page 6
Page 6 SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) min Minutes Time Alternating Current Type or a characteristic of current --- Direct Current Type or a characteristic of current n 0 No Load Speed Rotational speed, at no load .../min Revolutions or Reciprocation Per Minute Revolutions ...
-
Ryobi AG401 - page 7
Page 7 With the exception of the side handle and grinding wheel, your angle grinder has been shipped completely assembled. Carefully remove the grinder and accessories from the box. Make sure that all items listed in the packing list are included. Inspect grinder carefully to make sure no breakage or damage has occurred during shipping. ...
-
Ryobi AG401 - page 8
Page 8 KNOW YOUR ANGLE GRINDER Before attempting to use your grinder, familiarize yourself with all operating features and safety requirements. See Figure 1. Make sure all grinding wheels and recommended accessories are in accordance with listed specifications for this tool. For example, do not use grinding wheels that are rated at less than 11,000 ...
-
Ryobi AG401 - page 9
Page 9 4’’ Grinder W ARNING: Your grinder should never be connected to power supply when you are assembling parts, making adjustments, installing or removing grinding wheels, or when not in use. Disconnecting your grinder will prevent accidental starting that could cause serious injury. INSTALLING THE SIDE HANDLE See Figure 2. UNPLUG YOUR G ...
-
Ryobi AG401 - page 10
Page 10 Fig. 4 INCORRECT LOCATION OF GUARD ADJUSTMENTS CORRECT LOCATION OF GUARD IS BETWEEN POINTS A AND B W ARNING: Do not attempt to operate this tool until you have read thoroughly and understand completely all instructions, safety rules, etc. contained in this manual. Failure to comply can result in accidents involving fire, electric shock, or ...
-
Ryobi AG401 - page 11
Page 11 Fig. 8 SWITCH BUTTON ON 5 ° TO 15 ° OPERA TION 15 degrees and continuously moving at a steady, consistent pace. Move the grinder back and forth or up and down over the work area. Keep the grinder moving so that an excessive amount of material is not removed from one area. If the grinder is held in one spot too long, it will gouge and cut ...
-
Ryobi AG401 - page 12
Page 12 WRENCH CLAMP NUT GRINDING WHEEL GUARD DISC FLANGE CLAMP SCREW TO LOOSEN TO TIGHTEN FLAT(S) SPINDLE LOCK BUTTON SPINDLE BEARING CAP Fig. 9 W ARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. MAINTENANCE GUARD REPLACEMENT See Figure 9. After extended use, the ...
-
Ryobi AG401 - page 13
Page 13 LUBRICATION All of the bearings in this tool are lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. Therefore, no further lubrication is required. GENERAL Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commer ...
-
Ryobi AG401 - page 14
OPERA T OR'S MANUAL 4 in. (100 mm) Angle Grinder Model AG401 / Double Insulated 983000-031 5-05 RYOBI TECHNOLOGIES, INC. 1428 Pearman Dairy Road Anderson SC 29625 Post Office Box 1207 Anderson SC 29622 Phone 1-800-525-2579 www.ryobitools.com EXTENSION CORD CAUTION When using a power tool at a considerable distance from a power source, be sure ...
¿Tienes una pregunta acerca de Ryobi AG401?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Ryobi AG401, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Ryobi AG401 probablemente compartirá una forma de solucionarlo.