-
Cobra Electronics ESD-9870 - page 1
Operating Instructions for Y our Cobra ® 11 Band ™ Extra Sensory Detection ® RADAR/LASER DETECTOR MODEL ESD – 9870 Nothing comes close to a Cobra ® N ...
-
Cobra Electronics ESD-9870 - page 2
Important Information Federal Laws Governing the Use of Radar Detectors It is not against federal law to receive radar transmissions with your Cobra radar detector . The Communications Act of 1 924 guarantees your right to receive radio transmissions on any frequency . Local laws that contravene this Act, while illegal, may be enforced by your loca ...
-
Cobra Electronics ESD-9870 - page 3
NW c windshield bracket mount slot ON-OFF/VOLUME control 12V DC POWER JACK PROGRAM/MUTE button to manually mute audio alerts (and to enter programming mode). SET /CITY button for CITY or HIGHW A Y modes for fewer false alerts (and to change user mode settings while programming). SPEAKER AUXILIAR Y AUDIO JACK LASEREYE for 360° detection of laser an ...
-
Cobra Electronics ESD-9870 - page 4
T able of Contents Important information about... Federal Laws, Safety Alert/Strobe Alert, Safe Driving, Security of Y our Vehicle, Customer Support .......................................................................... A1 IInstallation ............................................................................................................. ...
-
Cobra Electronics ESD-9870 - page 5
3 1 INST ALLA TION Where to Mount Y our Unit Y ou will get optimum performance from your detector if you mount it at a point approximately in the center of the vehicle, as low as possible on the front windshield without obstructing the unit's view of the road either to the front or rear . Y ou can also mount it directly on the dashboard. The u ...
-
Cobra Electronics ESD-9870 - page 6
1 INST ALLA TION Dashboard Mounting 1. Place the detector on the dashboard to find a location where the unit has a clear , level view of the road. The angle can NOT be adjusted after mounting. 2. Remove the paper backing from one side of the hook-and-loop fastener . 3. Attach the pad to the dashboard at your chosen location and remove the other pap ...
-
Cobra Electronics ESD-9870 - page 7
7 3 OPERA TION• EASYSET PROGRAMMING 6 3 OPERA TION• EASYSET PROGRAMMING EasySet Programming All user mode settings on your detector can be changed by using Program mode. When changing the settings, please keep in mind: • Buttons can have multiple functions. • All settings will be stored in memory when the power is turned off and recalled wh ...
-
Cobra Electronics ESD-9870 - page 8
9 3 OPERA TION• SETTINGS 8 3 OPERA TION• EASYSET PROGRAMMING * The settings for these user modes can also be changed with the one-button method. See the description of each user mode (following) for details. EasySet Programming Menu (continued) Highway/City Mode Y our detector has a Highway mode and three different levels of City modes: City X, ...
-
Cobra Electronics ESD-9870 - page 9
3 OPERA TION• SETTINGS 3 OPERA TION• SETTINGS 11 10 IntelliMute IntelliMute is a unique new feature of the detector that allows you to avoid alerts you don’t need to hear because you are stopped or moving slowly . By sensing the “revs” (RPMs) of your engine, IntelliMute knows when you are at low speed and automatically mutes all alerts (e ...
-
Cobra Electronics ESD-9870 - page 10
3 OPERA TION• SETTINGS 3 OPERA TION• SETTINGS 13 12 Auto Mute Mode Auto Mute will automatically reduce the audio volume of all alerts after 4 seconds for as long as the signal is detected. When you turn Auto Mute mode on or off you will hear “auto mute on" in V oice Alert mode or 2 beeps in T one mode for Auto Mute on and “auto mute of ...
-
Cobra Electronics ESD-9870 - page 11
T one 1 beep Visual Display appears NOTE: If you do not press the SET/CITY button within 2 minutes, compass calibration will automatically terminate 1 beep Compass not set... Please try again... for 2 seconds “compass not set... please try again” 3 OPERA TION• SETTINGS 3 OPERA TION• SETTINGS 15 14 Compass Yo ur detector includes an internal ...
-
Cobra Electronics ESD-9870 - page 12
17 3 OPERA TION• SETTINGS Spectre Alert The detector is undetectable by police Spectre detection devices, and will alert you when such a device is in use near your vehicle. During the alert, the unit continues to detect other signals. Y ou can choose whether or not you want your unit to show Spectre alerts. W ith Spectre Detect mode on, you can a ...
-
Cobra Electronics ESD-9870 - page 13
18 3 OPERA TION• SETTINGS 19 4 DETECTION Audio Alerts In V oice Alert mode you will first hear several tones, then a voice message announcing the type of signal detected, followed by more tones. In T one mode, you will hear the tones only . In both V oice Alert and T one modes, a distinctly different alert tone is used for each type of signal det ...
-
Cobra Electronics ESD-9870 - page 14
20 4 4 DETECTION 21 PLEASE NOTE : There are different tones for each Safety Aler t VG2 * your detector provides LaserEye 360° detection of these signals VG-2 Alert Safety Alert T ype of Signal emergency vehicles road hazards trains Voi c e ” emergency vehicle approaching “ ” road hazard ahead “ " train approaching " Visual Displa ...
-
Cobra Electronics ESD-9870 - page 15
22 4 DETECTION 5 UNDERST ANDING RADAR & LASER Radar Speed Monitoring Systems Three band frequencies have been approved by the Federal Communications Commission (FCC) for use by speed monitoring radar equipment: X band 10.525 GHz K band 24.150 GHz Ka band 33.400-36.00 GHz Y our detector detects signals in all three radar bands. VG -2 and Spectre ...
-
Cobra Electronics ESD-9870 - page 16
24 5 UNDERST ANDING RADAR & LASER 25 5 UNDERST ANDING RADAR & LASER Strobe Alert Special strobes mounted on the light bars of authorized emergency vehicles (fire trucks, police cars, ambulances) automatically change traffic signals as the vehicle approaches an intersection. These strobes and the special strobe detectors located on the traff ...
-
Cobra Electronics ESD-9870 - page 17
27 6 PRODUCT SERVICE 26 6 MAINTENANCE & CUSTOMER SERVICE If you are asked to send your unit to the Cobra factory , please follow these steps: 1. Send the complete unit, including power cord. (It is not necessary to include the mounting bracket.) 2. For warranty repair , enclose some form of proof-of-purchase, such as a photocopy or carbon copy ...
-
Cobra Electronics ESD-9870 - page 18
29 8 SPECIFICA TIONS 28 7 W ARRANTY X band 10.525 ± 0.050 GHz K band 24.125 ± 0.125 GHz Safety Alert 24.070 ± 0.010 GHz T raffic Warning System 24.110 ± 0.010 GHz 24.190 ± 0.010 GHz 24.230 ± 0.010 GHz Ka band 34.700 ± 1.300 GHz Laser 910 ± 50 nm Strobe 700 ± 300 nm Dimensions 3 3 ⁄ 16 "W x 1 5 ⁄ 16 "H x 4 11 ⁄ 16 "D W ...
-
Cobra Electronics ESD-9870 - page 19
31 NOTES 30 NOTES ...
-
Cobra Electronics ESD-9870 - page 20
33 10 ORDER FORM For credit card orders fill out order form and fax to: 773.622.2269 or call 773.889.3087 (Press 1 from the main menu) 8:00 am - 6:00 pm, M-F , CST . Make check or money order payable to: Cobra Electronics 6500 W est Cortland Street Chicago, IL 60707 USA Attn: Accessories Dept. To order online, please visit our website at: www .cobr ...
-
Cobra Electronics ESD-9870 - page 21
Printed in Korea Part No. 480-064-P ©2003 Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707 USA The Cobra ® line of quality products includes: CB radios microT ALK ® radios Radar/Laser Detectors GPS Safety Alert ® T raffic W arning Systems Accessories HighGear ™ Accessories For more information or to order any of our p ...
¿Tienes una pregunta acerca de Cobra Electronics ESD-9870?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Cobra Electronics ESD-9870, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Cobra Electronics ESD-9870 probablemente compartirá una forma de solucionarlo.