-
Belling CH60R - page 1
P art No 082756702 Date 11.07 .2012 Belling 60 - 70 - 90cm Hob R otary UK Users Guide & Installation Handbook ...
-
Belling CH60R - page 2
CONTENTS & INTRODUCTION CONTENTS • SAFET Y • USING THE PRODUCT • CLEANING • INST ALLA TION INSTRUCTIONS • TECHNICAL DA T A • CUST OMER CARE INTRODUCTION Thank you for buying this British- built appliance from us. This guide book is designed to help you through each step of owning your new appliance, from installation to use. Please ...
-
Belling CH60R - page 3
SAFETY WARNING! - This appliance and its accessible parts may become hot during use. T o av oid burns, children less than 8 years of age shall be kept aw ay unless continuously supervised. This appliance can be used by children aged from 8 years and abo ve and persons with re- duced physical, sensory or mental capabilities or lack of experience and ...
-
Belling CH60R - page 4
SAFETY General Servicing should be carried out only by authorised personnel. Do not spra y aerosols in the vicinity of this appliance while it is in operation. Do not store or use fl ammable liquids or items in the vicinity of this appliance. Do not modify this appliance. • Always ensure that pan bases are dry , stable and fl at before using th ...
-
Belling CH60R - page 5
SAFETY Avoiding damage to the appliance. The ceramic glass of the hob can be damaged by objects falling onto it. Be especially careful with heavy jars of f ood being stored in cupboards above the hob , we recommend storing them away from the hob area. The edge of the glass can be damaged by being knocked by cookware. Cookware made of cast iron, cas ...
-
Belling CH60R - page 6
USING THE HOB - ELECTRIC (CERAMIC) Using Rotary Controls • Select the cooking zone you wish to use. • Place a suitable pan within the desig- nated cooking zone. • T urn the assigned control knob to the power setting you wish to use. • P ower setting 1 is the lowest and 6 is the highest. • T o switch off , turn the selected con- trol knob ...
-
Belling CH60R - page 7
CLEANING ELECTRIC HOB Ceramic glass hobs • It is recommended that you clean and wash the hob surf ace before using for the fi rst time. Apply a thin coat of ceramic hob cleaner to the hob to help maintain and protect it. • The ceramic hob top can be cleaned using a clean, damp cloth or kitchen paper . Do not use a used dishcloth or sponge as t ...
-
Belling CH60R - page 8
INSTALLATION between hob base and appliance must be maintained. Installation above an oven Ref er to the manufacturer’ s instructions for clear ances above the o ven. W e recommend a 25mm gap between the bottom of the hob and appliance. Installation above a unit with a drawer or door The base of the appliance must be pro- tected from damage e.g. ...
-
Belling CH60R - page 9
INSTALLATION Clearances and dimension – require- ments No shelf or overhang of combustible material should be closer than 650mm above the hob . There must be a minimum clearance of 50mm between the edges of the hob and any side walls; this clear ance must be maintained up to 420mm above the worktop. There must be a minimum clearance of 50mm betwe ...
-
Belling CH60R - page 10
INSTALLATION Fitting into worktop Cut a hole in the work surface to the required size. The worktop must be of heat-resistant material or co vered with heat-resistant material. Protecting the cut-out; The types of chipboard used for work surfaces swell relativ ely quickly in contact with humidity . Apply a suitable sealant to the cut edge to protect ...
-
Belling CH60R - page 11
INSTALLATION Installation Bracket Advice Secure the hob to the worktop by means of the brack ets provided, taking the thick - ness of the worktop into account. INST ALLA TION POSITIONS INST ALLA TION POSITIONS UNDERSIDE OF HOB Depending on your appliance it will be supplied with one of the following installation packs; Installation pack 1 4 x “U? ...
-
Belling CH60R - page 12
INSTALLATION CONNECT TO THE ELECTRICITY SUPPLY WARNING: This appliance must be earthed. Only connect to the electrical mains terminal with the power switched off . The electrical mains terminal is live. F ollow the terminal block connection schematic Loose and inappropriate connections can make the terminal ov erheat. Ensure the cable clamp is fi ...
-
Belling CH60R - page 13
SUPPLY: 220 -240V ~ 50Hz 4.85kW - 6.20kW R efer to the data badge on the under side of y our hob for speci fi c power r ating of your model TECHNICAL DATA ...
-
Belling CH60R - page 14
CUSTOMER CARE CUSTOMER CARE WEB SHOP Having purchased a superior cooker , hob or hood from us, you’ll naturally want to keep it looking great. And who better to help you care for it than the manuf ac- turer? W e offer an extensive r ange of accesso- ries, components and cleaning products which, will instantly give your cook er a good as new look. ...
-
Belling CH60R - page 15
Please keep this handbook for f uture reference, or f or anyone else who may use the appliance. ...
-
Belling CH60R - page 16
CUSTOMER CARE T o contact Belling about your appliance, please call Warranty Registration 0844 481 0182 to register your appliance Customer Care Helpline 0844 815 3746 in case of dif fi culty within the UK Alternatively gener al, spares and service information is av ailable from our website at www.belling.co.uk Please ensure that you hav e the pro ...
¿Tienes una pregunta acerca de Belling CH60R?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Belling CH60R, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Belling CH60R probablemente compartirá una forma de solucionarlo.