-
Philips 14PV320/05 - page 1
1. CONNECTING YOUR TV-VIDEO COMBI 4 .............. Connecting the cables 4 ............................. Connecting a decoder or other equipment 4 ............ 2. INSTALLING YOUR TV-VIDEO COMBI 5 ................ Initial installation 5 .................................. Allocating a decoder 5 .............................. Manual TV channel search ...
-
Philips 14PV320/05 - page 2
The remote control TELETEXT e TELETEXT : To switch TELETEXT on or off STANDBY m Switch off : To switch off set, interrupt menu function, interrupt a programmed recording (TIMER) SMART (green) SMART PICTURE : To show the preset picture settings SMART # (yellow) No function 0-9 Number buttons :0-9 CLEAR Delete : To delete last entry or clear programm ...
-
Philips 14PV320/05 - page 3
Front of the set 8 Power switch : To switch off the set Beware: When you switch the set off with the power switch, TIMER-recordings are not possible! m Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER) P p Programme number : To select programme number up or down Sp Volume : To regulate the volume H Rewind : Dur ...
-
Philips 14PV320/05 - page 4
Congratulations! You now own one of the most sophisticated and simple-to-use TV-VIDEO Combinations on the market. With this TV-VIDEO Combi you can record and play VHS-standard cassettes. Please take the time to read this operating manual before using your TV-VIDEO Combi. Safety instructions and other notes A Danger: High voltage! Do not remove the ...
-
Philips 14PV320/05 - page 5
Special functions on your TV-VIDEO Combi If a television programme, which transmits TELETEXT, is stored with programme number ’P01’, time and date will be set automatically. Philips has developed a system which produces the best possible playback quality. It reduces disturbance on old, worn video cassettes, and emphasises the detail on very goo ...
-
Philips 14PV320/05 - page 6
Important for the United Kingdom This machine is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug, please follow these instructions. a Take off the fuse cover and take out the fuse. b Put in a new fuse which should be a BS1362 5A, A.S.T.A. or BSI approved type. c Refit the fuse cover. If the plug fitted is not suit ...
-
Philips 14PV320/05 - page 7
Initial installation a Open up the battery compartment of your remote control and place the batteries in it as shown in the picture. b Close the battery compartment. c If you have connected the aerial to the TV-VIDEO Combi, press the OK button. ’Automatic TV channel search’ starts. This picture will appear on the screen: Searching... CHANNELS F ...
-
Philips 14PV320/05 - page 8
Manual TV channel search In certain cases the ’Automatic TV channel search’ may not be able to find all of the TV channels (e.g. coded TV channels). In that case, use this manual method to set the channels. a Press the MENU button on the remote control. The main menu will appear. b Select the line ’ Installation ’ with the A P q or P rB but ...
-
Philips 14PV320/05 - page 9
Special installation functions You can select one of the following installation functions in order to adapt the TV-VIDEO Combi to your own specific requirements. Automatic TV channel search Your TV-VIDEO Combi will search for all TV channels. If you want to start the automatic TV channel search again, then follow the instructions below. a Press the ...
-
Philips 14PV320/05 - page 10
Delete a TV Channel a Press the MENU button. The main menu appears. b Select the line ’ Installation ’ with the menu buttons A P q or P rB and confirm with the menu button SqC . c Select the line ’ Sort channels ’ with the menu buttons A P q or P rB and confirm with the menu button SqC . SORT CHANNELS 01 xxx 02 yyy 03 zzz 04 aaa 05 bbb 06 c ...
-
Philips 14PV320/05 - page 11
Automatic time and date setting (SMART CLOCK) D If a television programme, which transmits TELETEXT, is stored with programme number ` P01 `, time and date will be set automatically. D The clock will automatically be adjusted to winter time and summer time. a Press the MENU button on the remote control. The main menu will appear. b Select the line ...
-
Philips 14PV320/05 - page 12
SUMMARY OF USER GUIDE The OSD menu offers the following functions. More details on each can be found in the appropriate chapter. MAIN MENU Picture Sound Setup Tape Installation ã Exit: « press MENU User guide (OSD) The OSD (On-screen display) shows the various functions in the form of a menu on the television screen. You can then choose the setti ...
-
Philips 14PV320/05 - page 13
Selecting a TV programme Select the required TV channel (=programme number) with the P pAB button or with the digit buttons 0-9 on the remote control. D If you don’t know the programme number of the required TV channel: a Press the P pAB button for more than 2 seconds. The TV channel list appears on the screen. b Select the required TV channel wi ...
-
Philips 14PV320/05 - page 14
Playing a cassette a Put a cassette into the cassette slot. b Press the PLAY G button. c If you press the STOP h button once, the TV-VIDEO Combi will switch to pause. To stop, press the STOP h button again. d To eject the cassette, press the J/h button on the TV-VIDEO Combi or press the STOP h button on the remote control several seconds. D Some hi ...
-
Philips 14PV320/05 - page 15
Automatic search for a tape position (index search) At the start of each recording, the TV-VIDEO Combi will write an index code on the tape. a Press the INDEX E button. Press the I button to select the next code mark or the H button for the previous code mark. b When the TV-VIDEO Combi finds the code mark, it will automatically switch to play. Pict ...
-
Philips 14PV320/05 - page 16
Use ’Manual Recording’ to make a spontaneous recording (for example, a programme currently being shown). E If you want to start and stop a recording manually, read the section: ’Recording without automatic switch-off’. E If you want to start a recording manually but have it stopped automatically, read the section: ’Recording with automati ...
-
Philips 14PV320/05 - page 17
Auto-assembling You can use the auto-assembling function to join individual recordings without any major picture disturbance between them. a While the cassette is playing, search for the correct position on the tape. b Stop the cassette by pressing the STOP h button. ’ Pause ’ will appear on the TV screen. c Now start recording as usual by pres ...
-
Philips 14PV320/05 - page 18
Use programmed recording to automatically start and stop a recording at a later date. To make a programmed recording, your TV-VIDEO Combi needs to know: * the date you want to make the recording; * the programme number for the TV channel you want to record; * the start and stop time of the recording; * whether you want to use VPS or PDC; * the reco ...
-
Philips 14PV320/05 - page 19
e Confirm with the OK button. Your programming details will then appear on the TV screen. TIMER PROGRAMMING VPS DATE PROG. START END LP PDC REP. ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, 15 xxx 15:36 15:50 - * ONCE ã Exit: Start: « press TIMER press è D If VIDEOPlus+ does not recognise the TV channel, ’ P?? ’ will appear on the TV screen. Instead of ? ...
-
Philips 14PV320/05 - page 20
D Under ’ VPS/PDC ’, use the A P q or P rB button to switch ’VPS or PDC’ on or off. f Confirm with the OK button when the information is correct. g Confirm the message on the screen with the OK button. A TIMER recording can only start, if the set is not used for other video recorder functions (e.g. playback). D The programming information h ...
-
Philips 14PV320/05 - page 21
How to read TELETEXT E Press the TELETEXT e button to switch the TXT decoder on and off. The TV-VIDEO Combi is now receiving the TXT of the TV channel currently selected. E To store the current page, press the OK button. The next time you call up TELETEXT, you will automatically turn to this page. E If you want to select an other page, type in the ...
-
Philips 14PV320/05 - page 22
Switching the On-screen display (OSD) on or off You can switch the On Screen Display of the current operating information on or off. a Press the MENU button. The main menu will appear. b Select the line ’ Setup ’ with the buttons A P q or P rB and confirm with the SqC button. SETUP Parental control ON Display MAX Format 16:9 NORMAL ã Exit: « ...
-
Philips 14PV320/05 - page 23
Continuous playback You can automatically play a cassette again and again. When the end of the tape or the recording has been reached, it will rewind and start again. a Press the MENU button. The main menu will appear. b Select the line ’ Tape ’ with the buttons A P q or P rB . Confirm with the menu buton SqC . TAPE Tape speed SP Tape counter L ...
-
Philips 14PV320/05 - page 24
If you have any problems using this TV-VIDEO Combi, it may be caused by one of the reasons mentioned below. You can also call the customer service centre in your country. You will find the phone number in the enclosed guarantee leaflet. Your TV-VIDEO Combi does not respond to any button being pressed: • There is no power supply: check the power s ...
¿Tienes una pregunta acerca de Philips 14PV320/05?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Philips 14PV320/05, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Philips 14PV320/05 probablemente compartirá una forma de solucionarlo.