-
La Crosse Technology WT-5720 - page 1
WT-5720 Radio Controlled Projection Alarm Instruction Manual 0 2' ( ...
-
La Crosse Technology WT-5720 - page 2
2 TABLE OF CONTENTS Topic Page Inventory of Conte nts/ Addi tional Equi pment 3 About WW VB 3 Quick Set-U p Guide 4 Detailed Set-Up Guide Battery Installation 5 Program Mode Programming Sequence 6 Function Buttons 6 Time Zone Set ting 6-7 DST (Daylight Saving Tim e) Setting 7 Adjustable Snooze 7-8 Time Sett ing 8 Date Setting 8 12/24-Ho ur Sett ing ...
-
La Crosse Technology WT-5720 - page 3
3 INVENTORY OF CO NTENTS 1) WT-5720 p ro j ect i on alarm 2) AC adapter/transformer 3) Instructi on manual a nd warranty card. ADDITIONAL EQUIPME NT (not included) 1) Two fresh 1.5V AA batt eries (optio nal for project ion alarm) ABOUT WWVB (Radio Controlled Time) The NIST (National Institute of Standards and Tech nology—Time and Frequency Divisi ...
-
La Crosse Technology WT-5720 - page 4
4 QUICK SET-UP GUIDE 1) Insert two AA batteries into the projection alarm and/or plug into wall. Note: Do not press any bu ttons until the WWVB time signal is received or reception errors may occur. 2) Wait 10 minutes for WWVB reception. 3) If there is no WWVB reception manually s et the time and date (instructions in the Program Mode). 4) Program ...
-
La Crosse Technology WT-5720 - page 5
5 DETAILED SET-UP GUIDE I. BATTERY INSTALLATION A. Projection Al arm 1. Remove t he battery cover. 2. Observe the correct polarity, and in stall 2 AA b atteries. 3. In addition or instead of inserting batteries, the A C adapter can be used. Simply plug the adap ter into the receptacle on the underneath of the alarm clock and then plug in adapter. 4 ...
-
La Crosse Technology WT-5720 - page 6
6 II. PROGRAM MODE To enter the Program Mod e, hold down the “SET” button for 1 second, until the time zone (“-5” default) flashes in the lower right. Th e program mode guide is laid out in a manner that allows yo u to program each func tion separately, or you can fo llo w the instructions e ntirely to pr ogram the pr ojection alarm . Compl ...
-
La Crosse Technology WT-5720 - page 7
7 5. From –5h to –8h a US map with the highlighted time zone w ill also be displayed to the right of the time display. 6. Press and release the “SET” button to confirm the time zone setting and to advance to DST (Daylight saving time) setting. D. DST (Daylight S aving Time) Setting Note: The DST default is “On”, meaning that the WWVB wi ...
-
La Crosse Technology WT-5720 - page 8
8 5. Press and release the “SET” button to confirm the snooze setting and to advance to manually set the time. F. Time Setting Note: When the WWVB signal is found, that time will over-ride the manually set time. 1. Hold dow n the “SET” button for 1 sec o nd . 2. The selected time zone will flash). 3. Press and release the “SET” button 3 ...
-
La Crosse Technology WT-5720 - page 9
9 H. 12/24-H our Settin g Note: Setting to the 24-hour mode (also known as Military Time) will also cha nge the temperature to displ ay in ° C instead of ° F. 1. Hold dow n the “SET” button for 1 sec o nd . 2. The selected time zone will flash. 3. Press and release the “SET” button 9 times until the “12” hour time display flashes in t ...
-
La Crosse Technology WT-5720 - page 10
10 FEATURES & OPERATIONS A. Features 1. Radio-co ntrolled ti me and date 2. Projection of time 3. LCD light 4. Six modes of date/seconds/temperature display 5. Indoor temperature 6. Remote temperature 7. Dual alarm s 8. Adjustable snooze B. Radio-Controlled Time and Date 1. The projection alarm will automatically search for the time signal upon ...
-
La Crosse Technology WT-5720 - page 11
11 C. Projection of Ti me 1. When plugged in to an AC o utlet, the pr ojection alarm can c ontinuou sly project the time. 2. When operating on batteries alone the proj ectio n alarm will only project when a button is pressed. 3. The projection will auto-focus for display from three to six feet away. A dark surrounding will be necessary to clearly s ...
-
La Crosse Technology WT-5720 - page 12
12 F. Time Alarm The projection ala rm has two separate alarms for time, “ALM1” and “ALM2”. Th e alarms have a different sound; ALM1 increases in vo lume after 25 seconds, and again after 50 seconds. ALM2 is a con stant volume. The total dura tion is 96 seconds for each alarm. 1. Setting the Alarm a) Press and hold “ALM1” or “ALM2” ...
-
La Crosse Technology WT-5720 - page 13
13 G. Changi ng the Di spl a y M ode (Day , Seconds, and Tem perature) There are six possible displa y modes to view the day, seconds, and tem perature. To change the display (starting at the d efault of day, date, year): 1. Press and release the “MODE/+” butt o n. 2. The display s h oul d now show mont h, d ay, year. 3. Press and release the ? ...
-
La Crosse Technology WT-5720 - page 14
14 II. MAINTENANC E & CARE 1. Extrem e temperatures, vibrations, a nd shock sh ould be avoi ded to prevent damage to the units. 2. Clean displays and un its with a soft, damp cloth. Do not us e solvents or sc ouring agents—they may mark and dam age the display s and casings. 3. Do not submerge in water. 4. Immedi ately remove al l low powere ...
-
La Crosse Technology WT-5720 - page 15
15 TROUBLESHOOTING Problem: The Projection is faint Solution: 1) Change inten sity setting 2) Use AC ada pter 3) Darken surroundings 4) Use fresh ba tteries (if AC is not used ) Problem: The LCD is faint. Solution: Replace the batteries. Problem: No reception of WWVB signal. Solution: 1) It may help reception to face th e front of the projection al ...
-
La Crosse Technology WT-5720 - page 16
16 SPECIFICATIONS FOR WT-5 720 Temperature: Measuring range: 32 ° F to 122 ° F with 0.2 ° F resolution (indoor) (0 ° C to 50 ° C with 0.1 ° C reso lution) Checking intervals: Every 10 seconds indoor Power source: AC Adapter (included) Input: 120VAC/60Hz Outpu t: DC 6V/100MA Battery type: Station: 2 x AA, 1.5V (Alkaline) (option al) Battery li ...
-
La Crosse Technology WT-5720 - page 17
17 W AR R ANT Y IN F OR M AT I ON La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this produc t. T ...
-
La Crosse Technology WT-5720 - page 18
18 For warranty work, technical support, or information contact: La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 e-mail: support@lacrossetechnology.com (warranty work) sales@lacrossetechnology.com (information on other products) web: www.lacrossetechnology.com FCC ID: OMO-0 1RX (Receiver) THIS DEVI ...
¿Tienes una pregunta acerca de La Crosse Technology WT-5720?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con La Crosse Technology WT-5720, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con La Crosse Technology WT-5720 probablemente compartirá una forma de solucionarlo.