-
Sanyo KS1251 - page 1
INSTRUCTION MANUAL Split System Air Conditioner COOL/DRY Model KS0951 KS1251 KS1852 Save These Instructions! Pub. OI-85264180330002 ©SANYO 2000 Printed on Recycled Paper ...
-
Sanyo KS1251 - page 2
Features This air conditioner is equipped with cooling and drying functions. Details on these functions are provided below; refer to these descriptions when using the air conditioner . • Microprocessor Controlled Operation The interior compartment of the remote control unit contains several features to facilitate automatic operation, each logical ...
-
Sanyo KS1251 - page 3
Contents Page Features .................................................................................................................. 2 Product Information .............................................................................................. 3 Alert Symbols ............................................................................... ...
-
Sanyo KS1251 - page 4
Installation Location • We recommend that this air conditioner be installed properly by qualified installation technicians in accordance with the Installation Instructions provided with the unit. • Before installation, check that the voltage of the electric supply in your home or office is the same as the voltage shown on the nameplate. • Do ...
-
Sanyo KS1251 - page 5
Names of Parts NOTE This illustration is based on the external appearance of a standard model. Consequently , the shape may differ from that of the air conditioner which you have selected. This air conditioner consists of an indoor unit and an outdoor unit. Y ou can control the air conditioner with the remote control unit. Air Intakes Air from the ...
-
Sanyo KS1251 - page 6
Unit Display and Operation Selector Remote control receiver This section picks up infrared signals from the remote control unit (transmitter). Operation selector ON position This position is for operating the air conditioner with the wireless remote control unit. Set the selector normally in this position. OFF position Switch the selector to the OF ...
-
Sanyo KS1251 - page 7
Remote Control Unit (Display) SET TEMP. ON OFF 1 HR. H (1) Operation mode MILD DRY................................ COOL ....................................... (2) Fan speed AUTO ....................................... HIGH ........................................ MEDIUM .................................. LOW ....................................... ...
-
Sanyo KS1251 - page 8
Remote Control Unit NOTE The illustration above pictures the remote control unit after the cover has been lowered and removed. T ransmitter When you press the buttons on the remote control unit, the mark appears in the display and the setting changes are transmitted to the receiver in the air conditioner . Display Information on the operating statu ...
-
Sanyo KS1251 - page 9
Remote Control Unit (continued) MODE selector button (DRY) (COOL) Use this button to select the DRY or COOL mode. : The air conditioner reduces the humidity in the room. : The air conditioner makes the room cooler . FLAP button Press this button either to select to set the airflow direction to one of the six possible positions manually , or to sele ...
-
Sanyo KS1251 - page 10
Using the Remote Control Unit How to Install Batteries NOTE • The batteries last about six months, depending on how much you use the remote control unit. Replace the batteries when the remote control unit’ s display fails to light, or when the remote control cannot be used to change the air conditioner’ s settings. • Use two fresh leak-proo ...
-
Sanyo KS1251 - page 11
Using the Remote Control Unit (continued) Mounting the Remote Control Unit Mounting on a wall A. Removable mounting 1) Momentarily hold the remote control unit at the desired mounting position. 2) Confirm that the air conditioner responds correctly when you press keys on the remote control from that position. 3) After confirming correct operation, ...
-
Sanyo KS1251 - page 12
Operation with the Remote Control Unit 1. Manual Operation NOTE Check that the circuit breaker on the power panel is turned on and that the operation selector of the indoor unit is in the ON position. If the automatic operation settings of the unit do not meet your needs, press the setting buttons as described below and change the settings as desir ...
-
Sanyo KS1251 - page 13
Operation with the Remote Control Unit (continued) NOTE • This appliance has a built-in three minutes time delay circuit to ensure reliable operation. When the operation button is pressed, the compressor will start running within three minutes. In the event of power failure, the unit will stop. When the power is restored, the unit will restart au ...
-
Sanyo KS1251 - page 14
Operation with the Remote Control Unit (continued) 3. Night Setback Mode The Night Setback Mode is used for saving energy . Press the NIGHT SETBACK button while the air conditioner is operating. The mark appears in the display . T o cancel the night setback function, press the NIGHT SETBACK button again. In Cooling and DRY Mode: ( and ) 1HR. TIMER ...
-
Sanyo KS1251 - page 15
Special Remarks ‘ ‘DRY’ ’ ( ) Operation How it works? • Once the room temperature reaches the level that was set, the unit repeats the cycle of turning on and off automatically . • During DRY operation, the fan speed is automatically set to LOW or VERY LOW ; the fan speed then switches back and forth between LOW (for 20 seconds) and VER ...
-
Sanyo KS1251 - page 16
Using the 12-Hour ON and OFF Ti mer 1. TIMER ON mode (Example) After the length of time set for TIMER ON elapses, the unit begins operating. ON H The display depicted at left indicates that the air conditioner will begin operating in three hours. Setting procedure: STEP 1 Press the MODE selector button and select the desired operation mode. (See ? ...
-
Sanyo KS1251 - page 17
Using the 1-Hour OFF Ti mer 1. 1-Hour OFF Timer This function causes the unit to operate for one hour and then stop, regardless of whether the unit is on or off when the button is pressed. The 1 HR. indicator in the display indicates that this function is operating. Setting procedure: Regardless of whether the unit is operating or stopped, press th ...
-
Sanyo KS1251 - page 18
Adjusting the Airflow Direction 1. Horizontal The horizontal airflow can be adjusted by moving the vertical vanes with your hands to the left or right. CAUTION When the humidity is high, the vertical vanes should be in the front position during the cooling or drying operation. If the vertical vanes are positioned all of the way to the right or left ...
-
Sanyo KS1251 - page 19
Operation without the Remote Control Unit If you have lost the remote control unit or it has trouble, follow the steps below . 1. When the air conditioner is not running If you want to turn on the air conditioner , switch the operation selector to the OFF position, and then to the ON position. NOTE The set temperature and fan speed are automaticall ...
-
Sanyo KS1251 - page 20
Care and Cleaning (continued) Anti-mold filter The anti-mold filter behind the air intake grille should be checked and cleaned at least once every two weeks. How to remove the anti-mold filter 1. Grasp both ends of the air intake grille and pull it out and up. 2. Push the anti-mold filter up slightly , and then pull it down. Cleaning Use a vacuum c ...
-
Sanyo KS1251 - page 21
Care and Cleaning (continued) Air cleaning filter (not provided) The air cleaning filter removes dust and dirt from the air , and reduces odors and smoke from tobacco. NOTE KS0951/KS1251 The air cleaning filter is not provided with the air conditioner and must be purchased separately . The first time that you buy the air clean filter , it is necess ...
-
Sanyo KS1251 - page 22
Care and Cleaning (continued) Removing and remounting the air intake grille • With the air intake grille open all the way , grip both arms with your hands and pull toward you to remove. T o remount, hold the air intake grille roughly horizontal and push it in until the arm shafts fit into the indentations in the main unit, then fit the grille int ...
-
Sanyo KS1251 - page 23
T roubleshooting If your air conditioner does not work properly , first check the following points before requesting service. If it still does not work properly , contact your dealer or service center . T rouble Possible Cause Remedy Air conditioner does not run at all. 1. Power failure. 1. Restore power . 2. Leakage circuit breaker tripped. 2. Con ...
-
Sanyo KS1251 - page 24
SANYO FISHER COMP ANY A DIVISION OF SANYO NORTH AMERICA CORPORA TION 21605 Plummer Street Chatsworth, CA 91311 U.S.A. In Canada SANYO Canada Inc. 50 Beth Nealson Drive T oronto, Ontario, M4H 1M6, Canada oi330000 ...
¿Tienes una pregunta acerca de Sanyo KS1251?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Sanyo KS1251, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Sanyo KS1251 probablemente compartirá una forma de solucionarlo.