-
Canon CANOSCAN 9000F - page 1
Quick Start Guide Quick Start Guide QT5-2915-V01 ©CANON INC. 2 010 PRINTED IN THAILAND XXXXXXXX Please read this guide before operating this scan ner . Af ter you finish reading this guide, store it in a safe place for future reference. T able of Contents Safety Precautions .............................. 1 Usi ng the Scanner Buttons .............. ...
-
Canon CANOSCAN 9000F - page 2
• Microsoft is a registered trademark of Microsoft Corporation. • Windows is a trademark or re gistered trademark of Microsoft Corporation in the U.S. and/or other countries. • Windows Vista is a trademark or registered trademar k of Microsoft Corporation in the U.S. and/or other countries. • Macintosh and Mac are trademarks of Apple Inc., ...
-
Canon CANOSCAN 9000F - page 3
Safety Precautions 1 Safe ty Precautions Please read and take note of the following prec autions befor e using the scanner and accessories. W ARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. In order to use the scanner safely, always pay attention to the se warnings. CAUTION In ...
-
Canon CANOSCAN 9000F - page 4
Safety Precautio ns 2 CAUTION • As a rule, do not use electrical extension cords. Fi re or e lectrical shock may result. If the use of an extension cord is necessary , do not use one longer than 5 m (approxima tely 16.4 feet). Make sure that the extension cord is not twisted, and that the power cord is fully plugged into the extension cord . Do n ...
-
Canon CANOSCAN 9000F - page 5
Package Contents 3 P ac ka ge Contents Scanner and Accessories Document ation • Quick S tart Gu ide (this document) • Additional Document s Setup CD-R OM • Soft ware Progr ams - ScanGear (scanner driver) - MP Navigator EX (utility software) - Solution Menu (menu panel software) - ArcSoft PhotoS tudio (image editing software) • On-Screen Man ...
-
Canon CANOSCAN 9000F - page 6
Installing the Software 4 Installing the Software 1 Place the Setup CD-ROM in the drive. For Macintosh: Double-click the Setup icon. Enter the administr ator ID and password on the authentication dialog box. For Windows XP/Windows 2000 and Macintosh, skip step 2 and go to step 3. 2 For Windows 7/Windows Vista, when the AutoPlay dialog box appears, ...
-
Canon CANOSCAN 9000F - page 7
Installing the Software 5 4 Click Easy Install on the main menu. 5 Click Inst all to start installation. Carefully read the License Agreement, and then click Ye s to proceed. For Macintosh, skip step 6 and go to step 7. 6 For Windows, carefully read the Please Allow All Install W izar d Processes screen, and then click Next . 7 Follow the on-screen ...
-
Canon CANOSCAN 9000F - page 8
Installing the Software 6 9 For Windows, when the Extended Survey Program screen appears, confirm it. If you can agree, click Agree . 10 When the installation is complete, follow the on-screen instructions. For Windows: Click Restart . After restarting the computer, Solution Menu will appear. For Macintosh: Click Exit . Solu tion Menu icon will be ...
-
Canon CANOSCAN 9000F - page 9
Preparing the Scan ner 7 Preparing the Scanner Unlocking the Scanner 1 Peel the shipping tapes off the scanner . 2 Open the document cover a nd slide the sca n ner lock switch towa rd the unlock mark () . 3 Close the document cover . • The document cover is locked temporaril y at an angle of about 50 degrees. • Handle the scanner with both hand ...
-
Canon CANOSCAN 9000F - page 10
Preparing the Scanner 8 Connecting the Scanner 1 Connect the scanner to your co m puter with the supplied USB cable. 2 Connect the supplied po wer cord to the scanner . 3 Plug the po wer cord int o the electr ical outlet. 4 Press ( ) to turn the power on. Tu r n i n g t h e P o w e r O f f T o turn the scanner off, be sure to press the ON button. C ...
-
Canon CANOSCAN 9000F - page 11
Try Scanning 9 T r y Scanning This section explains the basic sc anning procedures using MP Navigator EX. 1 Open the document cove r to make sure the protective sheet is put on. 2 Place a color pho to document with the side to be scanned facing down on the platen glass at least 1 cm (0.4 in.) away from the edges of the platen glass, and then close ...
-
Canon CANOSCAN 9000F - page 12
Using the Scanner Buttons 10 Using the Scanner Buttons Scanner buttons allow you to copy , scan, e-mail, and save scanned images in PDF format with a press of a button. Simply place your document on t he scanner , and then press the scanner button for the required function. For more information, see " On-Screen Manual ". • Before using ...
-
Canon CANOSCAN 9000F - page 13
Scanning with MP Navigator EX 11 Scanning with MP Na vigator EX MP Navigator EX enables you to perform various task s, such as compositi ng images, scanning with the scanner driver (ScanGear ), and correcting/ editing scanned images, as well as simply scanning. St arting MP Navigator EX 1 Click Scan/import ph otos or documents in the Solution Menu. ...
-
Canon CANOSCAN 9000F - page 14
Scanning Fi lm 12 Scanning Film This scanner can scan 35 mm film (film strip or slide) and 120 format film. Follow the procedure below when scanning film. 1 Remove the protective sheet from the document cover . Press and hold the lever at the top of the protective sheet c while you pull the sheet outward and detach it d . 2 Insert the film into the ...
-
Canon CANOSCAN 9000F - page 15
Scanning Film 13 35 mm Slides c Align the Film Guide’s tab with the FILM symbol on the platen glass of the scanner. d Place a slide or slides face down (correctly viewed from below) in the Film Guide as shown in the figure on the right. 120 Format Films c Align the Film Guide’s tab with the FILM symbol on the platen glass of the scanner, then o ...
-
Canon CANOSCAN 9000F - page 16
Scanning Fi lm 14 3 Close the document cover . 4 S tart MP Navigator EX. Follow the step 3 in "Try Scanning" on page 9. 5 Click Film . Using a Film Retainer Sheet Curled film strips can stick to the platen glass and cause a pattern of rings called Newton Rings to appear on the scanned image. If this occurs, scan using the supplied Film Re ...
-
Canon CANOSCAN 9000F - page 17
Scanning Film 15 6 Click Scan . 7 When the preview is displayed, place a check mark beside the number(s) of the frame(s) you want to scan, and then click Scan to start scanning. 8 When prompted that the scanning complete d, click Exit . 9 Click Save to save the images and close MP Navigator EX. Do not move the scanner while it is operating. Do not ...
-
Canon CANOSCAN 9000F - page 18
Specifications 16 Specifica tions *1 Optical Resolution represents the maximum sampling rate based on ISO 14473. *2 For film scanning only. *3 The fastest speed in Hi-Speed USB mode on Windows PC. Transfer time is not included. Scan ning speed varies according to the doc ument types, scan settin gs, or specifications of the computer. *4 USB connect ...
-
Canon CANOSCAN 9000F - page 19
Quick Start Guide Quick Start Guide QT5-2915-V01 ©CANON INC. 2 010 PRINTED IN THAILAND XXXXXXXX Please read this guide before operating this scan ner . After you finish reading this guide, store it in a safe place for future reference. T able of Contents Safety Precautions .............................. 1 Usi ng the Scanner Buttons ............... ...
¿Tienes una pregunta acerca de Canon CANOSCAN 9000F?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Canon CANOSCAN 9000F, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Canon CANOSCAN 9000F probablemente compartirá una forma de solucionarlo.