-
hussman DBRP 01 - page 1
/Chino DBP , DBRP 01,03 ISLAND PRODUCE REV .0210 Installation & Operation Manual DBP , DBRP 01,03 ISLAND PRODUCE P/N IGIP-DBP , DBRP 01,03-0210 INST ALLA TION & O P ER A T IO N GUIDE ...
-
hussman DBRP 01 - page 2
IGIP-DBP, DBRP 01,03-0210 2 /Chino A publication of Hussmann ® Chino 13770 Ramona A venue • Chino , California 91710 (909) 628-8942 F AX (909) 590-4910 (800) 395-9229 K eep this booklet with the case at all times for futur e r efer ence . THIS BOOKLET CONT AINS INFORMA TION ON: DBP , DBRP 01,03 Island Produce Cases SHIPPING D AMA GE All equipmen ...
-
hussman DBRP 01 - page 3
Rev.0 210 3 Cut & Plan Views DBP-03 Standard Section Produce Scale = 3/8" 38 1 / 2 " 70 1 / 4 " 26 1 / 8 " 35 1 / 4 " 30" 15 3 / 4 "1 5 3 / 4 " Optional Base Display 11 " 14 1 / 4 " 4" 26 1 / 8 " 20 1 / 8 " 5'-10 1 / 8 " 41 5 / 8 " DBRP Straight Section Scale = 1/4& ...
-
hussman DBRP 01 - page 4
IGIP-DBP, DBRP 01,03-0210 4 LOCA TION The refrigerated mer chandisers ha ve been designed f or use only in air conditioned stor es where temperatur e and humidity ar e maintained at or below 75 ° F and 55% rela- tive humidity . DO NO T allow air conditioning, electric fans, ov ens, open doors or windows (etc.) to create air cur - r ents ar ound th ...
-
hussman DBRP 01 - page 5
Rev.0 210 5 SETTING AND JOINING The sectional construction of these models enable them to be joined in line to giv e the effect of one continuous displa y . A joint trim kit is supplied with each joint. LEVELING IMPOR T ANT! IT IS IMPERA TIVE THA T CASES BE LEVELED FROM FR ONT T O BA CK AND SIDE T O SIDE PRIOR T O JOIN- ING. A LEVEL CASE IS NECESSA ...
-
hussman DBRP 01 - page 6
IGIP-DBP, DBRP 01,03-0210 6 Plumbing WASTE OUTLET AND P-TRAP The waste outlet is located off the center of the case on one side allowing drip piping to be run lengthwise under the fixture. A 1-1/2" P-trap and thr eaded adapter are supplied with each fixture. The P-trap must be installed to pr event air leakage and insect entrance into the fixt ...
-
hussman DBRP 01 - page 7
Rev.0 210 7 REFRIGERANT TYPE The standard r efrigerant will be R-22 unless otherwise specified on the customer or der . Check the serial plate on the case for inf ormation. PIPING The refrigerant line outlets ar e located under the case. Locate first the electrical box, the outlets are then on the same side of the case but at the opposite end. Insu ...
-
hussman DBRP 01 - page 8
IGIP-DBP, DBRP 01,03-0210 8 Electrical WIRING COLOR CODE GREEN GROUND PURPLE ANTI-SWEA T ORANGE LIGHTS YELLOW RECEPT ACLE RED / BLACK T -ST A T /SOLENOID 230V BLACK / WHITE T - S TAT / S O L E N O I D 115V BRO WN F AN MO TORS CASE MUST BE GROUNDED NOTE: Refer to label affixed to case to determine the actual configuration as checked in the “TYPE I ...
-
hussman DBRP 01 - page 9
Rev.0 210 9 User Information STOCKING Improper temperatur e and lighting will cause serious pr od- uct loss. Discoloration, dehydration and spoilage can be contr olled with proper use of the equipment and handling of pr oduct. Pr oduct temperature should alwa ys be main- tained at a constant and pr oper temperature. This means that fr om the time t ...
-
hussman DBRP 01 - page 10
IGIP-DBP, DBRP 01,03-0210 10 Maintenance ELECTRICAL PRECAUTIONS BEFORE SERVICING – Always disconnect electrical power at the main disconnect when servicing or replacing any electrical component This includes (but not limited to) Fans, Heaters, Thermostats, and Lights. REPLACING FLUORESCENT LAMPS Fluorescent lamps ar e furnished with a shatterpr o ...
-
hussman DBRP 01 - page 11
Rev.0 210 11 Electrical and Refrigeration Specifications TEMPERATURE DISCHG. FAN SIZE DEFROST ELECTRICAL CIRCUITS SELF CONTAINED UNIT DATA BTU AVG AIR T-STAT/ TYPE & FREQ. 115 V. SELF CONTAINED REQ’D EVAP PROD DISC VELOC CUT IN OF NUMBER & E E FANS STD. LOW PRESSURE LENGTH PER FT. TMP TMP TMP @FPM SETTINGS COIL OF MOTORS DURATION (OPT.) F ...
-
hussman DBRP 01 - page 12
IGIP-DBP, DBRP 01,03-0210 12 Electrical Schematics By: Checked By: No. Descripti on: Revisions: dbrp-01.dft Hussmann Corp oratio n 137 70 Ramona Avenue Chino , CA . 91710 (909)- 590- 491 0 Lic.#: 64440 6 Date: Drawing Title: Next A ssembly: Drawn By: Drawing N o.: Pro ject Title: Date: Ab raham C . Hui ACH 07/29/9 8 X Sheet 1 of 1 DBRP-01/03 Wiring ...
-
hussman DBRP 01 - page 13
Rev.0 210 13 MOT OR MOT OR MOT OR S S Brow n General Grounding Area To Sensors Case Controller Com puter Red (115/230V. ) Black/ White (115V. ) T-Sta t Liqu id So lenoid (Optio nal) (Optio nal) Electronic TXV MOTO R MOT OR 8' 12' 16' B B B Or ange Light S witch Lithonia se lf contained Led ge Lights ( Optional) ( No. of la m ps varie ...
-
hussman DBRP 01 - page 14
IGIP-DBP, DBRP 01,03-0210 14 MO TO R MOT OR MO TO R S S Brown G ene ral Grou nding Are a To S e nsors Case Contro ller Comp ut e r Red (1 15/230V.) Black/Whi te ( 115V.) T-Stat Liquid Solenoi d (Op t iona l) (Opti onal) La beled "C ontroller" MO TO R MO TO R B232I120 B332I120 B332 I120 F17T 8 - SPX41 Ba llast Ba llast Ballast MO TO R MOT ...
-
hussman DBRP 01 - page 15
Rev.0 210 15 APPENDIX A. – Temperature Guidelines Refrigerated The refrigerators should be operated according to the manufacturer’s published engineering specifications for entering air temperatures for specific equipment applications. Table 1 shows the typical temperature of the air entering the food zone one hour before the start of defrost a ...
-
hussman DBRP 01 - page 16
IGIP-DBP, DBRP 01,03-0210 16 potentially hazardous food. 1.1 The following recommendations are made for the purpose of arriving at easily taken and understood data which, coupled with other observations, may be used to determined whether a display refrigerator is working as intended: a) INSTRUMENT – A stainless steel stem-type thermometer is reco ...
-
hussman DBRP 01 - page 17
Rev.0 210 17 d) Care must be taken when cross merchandising products to ensure that potentially hazardous vegetable products are not placed in non refrigerated areas. e) Display and storage equipment doors should be kept closed during periods of inactivity. f) Minimize the transfer time of perishables from storage to display. g) Keep meat under ref ...
-
hussman DBRP 01 - page 18
IGIP-DBP, DBRP 01,03-0210 18 ...
-
hussman DBRP 01 - page 19
Rev.0 210 19 Limited W arranty This warranty is made to the original user at the original installation site and is not transf erable . Hussmann merchandisers ar e war ranted to be free fr om def ect in material and workmanship under normal use and ser vice f or a period of one (1) year fr om the date of original installation (not to exceed fifteen ...
-
hussman DBRP 01 - page 20
IGIP-DBP, DBRP 01,03-0210 20 The MODEL NAME and SERIAL NUMBER is required in or der to pr ovide you with the correct parts and information for y our particular unit. They can be found on a small metal plate on the unit. Please note them below for futur e reference. MODEL: SERIAL NUMBER: /Chino Additional copies of this publication ma y be obtained ...
¿Tienes una pregunta acerca de hussman DBRP 01?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con hussman DBRP 01, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con hussman DBRP 01 probablemente compartirá una forma de solucionarlo.