-
Panasonic WV-CP500 - page 1
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. No model number suffix is shown in this manual. This illustration repr esents WV -CP500. Lens: Option Installation Guide Color CCTV Camera Model Nos. WV -CP500 WV -CP504 ...
-
Panasonic WV-CP500 - page 2
2 CAUTION: TO RE DUC E THE RI SK OF EL ECT RIC S HOC K, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrow- head symbol, within an equilat- eral triangle, is intended to alert the user to the presence of unin- sul ...
-
Panasonic WV-CP500 - page 3
3 Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat s ...
-
Panasonic WV-CP500 - page 4
4 Limitation of liability THIS PUBLICA TION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED W ARRANTIES OF MERCHANT ABILITY , FITNESS FOR ANY P ARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD P ARTY'S RIGHT . Disclaimer of warranty IN NO EVENT SHALL Panasonic ...
-
Panasonic WV-CP500 - page 5
5 Preface This product is a 1/3-inch type {1/3"} CCD color CCTV camera. Connection of this product to a video monitor allows users to use this product as a monitoring camera. • WV -CP500:120VACpowersupply • WV -CP504:24VAC,12VDCpowersupply Introduction of SUPER-D5 (super dynamic fu ...
-
Panasonic WV-CP500 - page 6
6 About the user manuals Trademarks and registered trademarks The operating instructions of the camera consist of 2 sets: this book and operating instructions (PDF). This book explains how to install the camera. Refer to the "Operating Instructions (PDF)" on the provided CD-ROM for descriptions of how to perfor m the unit settings. Adobe ...
-
Panasonic WV-CP500 - page 7
7 Contents Important safety instructions....................................................................................................... 3 Limitation of liability .................................................................................................................... 4 Disclaimer of warranty ...................................... ...
-
Panasonic WV-CP500 - page 8
8 Precautions This product has no power switch. Power is supplied from an exter nal 12 V DC/ 24 V AC (WV -CP504) or 120 V AC (WV - CP500) power-supply device. Refer to ser - vice personnel for how to turn on/off the power . Use this product for indoor use only. Do not expose this product to direct sunlight for hours and do not install the product n ...
-
Panasonic WV-CP500 - page 9
9 Major operating controls and their functions (UP) (LEFT) (RIGHT) (DOWN) (SET) NEAR FA R BF/MENU Side view (WV -CP500) Side view (WV -CP504) ALC lens connector Inside the side cover (Slide the cover leftward to the lock position.) Operation buttons* : Up button (UP) : Down button (DOWN) : Left button (LEFT), NEAR : Right button (RIGHT), F AR : Set ...
-
Panasonic WV-CP500 - page 10
10 POWER ALARM OUT ALARM IN GND VIDEO OUT 120V ~ 60Hz Operation buttons* : Up button (UP) : Down button (DOWN) : Left button (LEFT), NEAR : Right button (RIGHT), F AR : Setting button (SET), BF/MENU * The following names are assigned to each button in this book: ALARM OUT ALARM IN POWER VIDEO OUT 24V IN ~ 1-L 12V IN NC 2-N GND (UP) (LEFT) (RIGHT) ( ...
-
Panasonic WV-CP500 - page 11
11 Side cover (only for WV-CP500) When the operation buttons are used, the side cover is slide leftward to the lock posi- tion. ALC lens connector The ALC connector is connected to this ALC lens connector . Tripod mount base This socket is used to mount the camera mount bracket (option). The tripod socket can be mounted on either top or bottom of t ...
-
Panasonic WV-CP500 - page 12
12 Precautions for installation This camera is designed to be used indoors. This camera is not operable out- doors. Do not operate this product beyond the specified temperature, humidity or power source ratings. Use this product at temperatures within –10 °C to +50 °C {14 °F to 122 °F}, and humidity below 90 %.The input power source is 12 V D ...
-
Panasonic WV-CP500 - page 13
13 Power cord (only for WV-CP500) Connect the power cord securely . Run the power cor d so that no load is applied to the cord when panning or tilting the camera. (Failure to observe this may disconnect the power cord, and accordingly no image is dis- played.) ...
-
Panasonic WV-CP500 - page 14
14 Installation and connection z Rotate the lens (option) clockwise slowly to mount the lens. Important: • ForuseofC-mountlens,usetheC-mountadaptor(option). • For preventionof damage to the camera body , use a lens with protrusionof 5.5 mm {7/32"} or less fr ...
-
Panasonic WV-CP500 - page 15
15 ALC lens connector 1 3 2 4 Screws (locally procured) Screws (locally procured) <Installation sample on a ceiling> Camera mount bracket (option) x Connect the lens cable to the ALC lens connector of the camera. Pin No. 1 Brake @ 2 Brake ! 3 Drive ! 4 Drive @ c Secure the camera mount bracket (option) to an installation position, and mount t ...
-
Panasonic WV-CP500 - page 16
16 • Themountingconditionsofthecameramountbracketaredescribedasfollows: For some applicable mount brackets, "A" is attached to the model number . The mounting condi- tions are the same even for the A-attached models. Installation place On ceiling On wall Applicable mount bracket WV -7011 WV -70 ...
-
Panasonic WV-CP500 - page 17
17 v The video output cable is connected to this video output connector. Important: • Besuretoturnoffthepowerofeachdevicebefor econnection. • Besuretosecur ethecoaxialcableconnectors. Connect a coaxial cable to the video output connector . b Use a cable tie (locally procu ...
-
Panasonic WV-CP500 - page 18
18 External synchronization switch The settings of the alarm input/output are configured on the SETUP menu. Refer to the network operating instructions (PDF) for further infor mation. Important: • Besuretoturnoffthepowerofeachdevicebefor econnection. Alarm output Input specification: Open collector out- ...
-
Panasonic WV-CP500 - page 19
19 n Turn on the power. WV-CP500 The included power cord is connected to this power connector . Connect between the power connector on the rear side of the camera and a plug socket with the supplied power cord. POWER ALARM OUT ALARM IN GND VIDEO OUT 120V ~ 60Hz 120 V AC 60 Hz Power cord (accessory) WV-CP504 Important: • The power sup ...
-
Panasonic WV-CP500 - page 20
20 m Adjust the camera angle by loosening the screw of the camera mount bracket while viewing the video monitor. Be sure to loosen the screw of the camera mount bracket when the camera angle is adjust- ed. If the camera angle is changed when the screw is tight, excessive force is applied to the camera mount bracket and camera, and accordingly they ...
-
Panasonic WV-CP500 - page 21
21 e T o perfor m fine adjustment of the back focus after automatic back focus adjustment, use the right or left button. (No operation for 10 seconds or more closes the setup menu.) Note: • When an auto iris lens is used to record a subject, the originally adjusted focus may be slightly of ...
-
Panasonic WV-CP500 - page 22
22 Setup menu Perfor ming each setting item in the setup menu should be completed in advance to use this unit. Per form the settings for each item in accordance with the conditions of the camera shoot- ing area. Refer to the operating instructions (PDF) for further infor mation. List of setup menu CAMERA ID This item specifies the camera title. The ...
-
Panasonic WV-CP500 - page 23
23 Setup item Description SPECIAL CHROMA GAIN Adjusts the chroma level. AP GAIN Adjusts the aperture level. PEDEST AL Adjusts the pedestal (brightness) level. HUE Adjusts the chroma phase (hue). PIX OFF Corrects image defects such as flaws. COMMUNICA TION Performs the communication setting of the system with a receiver into which this unit is integ ...
-
Panasonic WV-CP500 - page 24
24 Screenshot 2 The setup mode changes to "ENABLE", and the setup menu becomes ready to be set. Step 3 Move the cursor to the item to be set, and press the setting button. Screenshot 1 Hold down the setting button for approx. 2 seconds to call up the top screen of the setup menu. Step 1 Press the up button or the down button to move the c ...
-
Panasonic WV-CP500 - page 25
25 Screenshot 3 The selected setup screen in the setup menu appears on the screen. Note: • If t he to p s cr ee n o f t he se t up me nu is called up with the operation buttons while a camera image is displayed, the setup mode is always "DISABLE" to pre- vent operation errors. T o per form settings ...
-
Panasonic WV-CP500 - page 26
26 Screen transition diagram MODEL WV-CP500 SERIES CAMERA ID OFF CAMERA SYSTEM BACK-FOCUS SPECIAL LANGUAGE END SETUP ENABLE **CAMERA SETUP** SCENE1 ALC/ELC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF WHITE BAL ATW1 DNR HIGH BW MODE AUTO1 i-VMD RET TOP END **SYSTEM SETUP** SYNC INT ALARM IN/OUT PRIVACY ZONE OFF STABILIZER OFF EL-ZOOM OFF RET TOP END ** ...
-
Panasonic WV-CP500 - page 27
27 • Arethepowercordandcoaxialcable connected appropriately? → Check whether the connection is appropriately established. Cause/solution • Isthemonitor brightness appropriately adjusted, or is the contrast appropri- ately adjusted? → Check whether the monitor settings are appr opriate. Troubleshoo ...
-
Panasonic WV-CP500 - page 28
28 • Thepowercord, power connector , or power plug is damaged. Use of the damaged cord, connector , or plug may cause electric shock or fire. Disconnect the power plug immedi- ately and request r epair to your deal- er . Damaged power cord sheathing Heated portion of power line consisting of power cord, connector , and power plug ...
-
Panasonic WV-CP500 - page 29
29 Specifications • General Power source: WV -CP500: 120 V AC 60 Hz WV -CP504: 24 V AC 60 Hz, 12 V DC Power consumption: WV -CP500: 3.2 W WV -CP504: 24 V AC: 3.6 W , 12 V DC: 310 mA Ambient operating temperature: –10 °C to +50 °C {14 °F to 122 °F} Ambient operating humidity: Less than 90 % (non condensing) Video output: VBS: 1.0 V [p-p]/75 ...
-
Panasonic WV-CP500 - page 30
30 Functions: Camera title: Up to 16 characters (alphanumeric characters, marks) Light control mode setting: ALC/ALC+/ELC Super Dynamic 5 ON/ON (i-VMD)/OFF Electronic shutter speed: OFF (1/60), 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 s AGC: ON (HIGH, MID, LOW)/OFF Sensitivity up: OFF/AUTO (×2, ×4, ×6, ×10, ×16, ×32)/FIX (×2, ×4 ...
-
Panasonic WV-CP500 - page 31
31 ...
-
Panasonic WV-CP500 - page 32
Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America www .panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic W ay 2H-2, Secaucus, New Jersey 07094 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www .panasonic.ca Panasonic Sales C ...
¿Tienes una pregunta acerca de Panasonic WV-CP500?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Panasonic WV-CP500, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Panasonic WV-CP500 probablemente compartirá una forma de solucionarlo.