-
Canon 4426B002 - page 1
EF70-300mm f/4-5.6L IS USM Instruction ENG C OP Y ...
-
Canon 4426B002 - page 2
ENG-1 Dedicated to EOS cameras, the Canon EF70- 300mm f/4-5.6L IS USM lens is a high- performance telephoto zoom lens equipped with an Image Stabilizer . • “IS” stands for Image Stabiliz er . • “USM” stands for Ultr asonic Motor. 4. Ultrasonic motor (USM) f or quick and quiet autofocusing. 5. Manual f ocusing is av ailable after the sub ...
-
Canon 4426B002 - page 3
ENG-2 a Safety Precautions a Safety Precautions • Do not look at the sun or a bright light source through the lens or camera. Doing so could result in loss of vision. Looking at the sun directly through the lens is especially hazardous. • Whether it is attached to the camera or not, do not leave the lens under the sun without the lens cap attac ...
-
Canon 4426B002 - page 4
ENG-3 Nomenc lature Hood mount ( → 6) Filter mounting thread ( → 13) Image stabilizer switch ( → 8) Image stabilizer mode selector switch ( → 8) Focus mode switch ( → 5) Zoom ring ( → 5) Focusing ring ( → 5) Distance scale ( → 11) Contacts ( → 4) Lens mount index ( → 4) Rubber ring ( → 4) Tripod mounting location ( → 12) Zoo ...
-
Canon 4426B002 - page 5
ENG-4 See your camera’ s instr uctions f or details on mounting and detaching the lens. • After detaching the lens, place the lens with the rear end up to prev ent the lens surface and electrical contacts from getting scratched. • If the contacts get soiled, scratched, or hav e fingerpr ints on them, corrosion or faulty connections can result ...
-
Canon 4426B002 - page 6
ENG-5 3. Zooming To z oom, turn the zoom ring. Be sure to finish zooming bef ore focusing. Zooming after focusing can aff ect the focus . Especially for shooting distances shorter than 3 m / 9.8 ft., zooming to another f ocal length will gr eatly change the focus. 2. Setting the Focus Mode To shoot in autof ocus (AF) mode, set the f ocus mode switc ...
-
Canon 4426B002 - page 7
ENG-6 4. Hood The ET -73B hood can keep unwanted light out of the lens, and also protects the lens from rain, snow , and dust. To attach the hood, align the hood’ s attachment position mar k with the red dot on the front of the lens, then turn the hood as shown by the arro w until the lens' red dot is aligned with the hood's stop positi ...
-
Canon 4426B002 - page 8
ENG-7 The zoom ring can be fixed to k eep the lens at the shor test point. This function is conv enient for carrying a camera on a strap because it prev ents the lens from extending. 5. Fixing the Zoom Ring Slide the zoom ring lock lev er in the direction indicated by the arro w . •T o release the zoom ring, slide the zoom ring lock le ver in the ...
-
Canon 4426B002 - page 9
ENG-8 Y ou can use the image stabilizer in AF or MF mode. 6. Image Stabilizer Settings Select the stabilizer mode. • MODE 1: Corrects vibrations in all directions. It is mainly effectiv e for shooting still subjects. • MODE 2: It compensates f or ver tical camera shake during f ollo wing shots in a horizontal direction, and compensates for hori ...
-
Canon 4426B002 - page 10
ENG-9 7. Tips on Using the Image Stabilizer • In semi-darkened areas such as indoors or outdoors at night. • In locations where flash photograph y is prohibited, such as ar t museums and theater stages. • In situations where your f ooting is uncer tain. •I n situations where fast shutter settings cannot be used. • When panning subjects in ...
-
Canon 4426B002 - page 11
ENG-10 Tips on Using the Image Stabilizer • The Image Stabilizer cannot compensate f or a b lurred shot caused b y a subject that moved. • Set the ST ABILIZER switch to when you are taking pictures using the Bulb setting (long e xposures). If the ST ABILIZER s witch is set to , the image stabilizer function ma y introduce errors. • The Image ...
-
Canon 4426B002 - page 12
ENG-11 8. Infinity Compensation Mark 9. Infrared Index Infinity compensation mark Distance index To compensate f or shifting of the infinity focus point that results from changes in temperature. The infinity position at normal temperature is the point at which the vertical line of the L mark is aligned with the distance indicator on the distance sc ...
-
Canon 4426B002 - page 13
ENG-12 10. Using the T ripod Mount (Sold separately) Adjusting the Rev olving Mount This lens can be used with the C (W II) tripod mount r ing, sold separately . Y ou can loosen the or ientation lock-knob on the tripod mount to allow it to rotate as needed to fit a par ticular camera model f or switching between v er tical and horizontal positions. ...
-
Canon 4426B002 - page 14
ENG-13 • If you need a polarizing filter , use the Canon Circular P olarizing Filter (67mm). •T o adjust the polarizing filter, first remo ve the lens hood. Y ou can attach filters to the filter mounting thread on the front of the lens. 11. Filters (Sold separately) 12. Extension T ubes (Sold separately) Camera-to-Subject Magnification Distance ...
-
Canon 4426B002 - page 15
ENG-14 Specifications Focal Length/Aperture 70-300 mm f/4-5.6 Lens Construction 14 groups, 19 elements Minimum Aperture f/32-45 Angle of View Diagonal: 34° - 8° 15’ V er tical: 19° 30’ - 4° 35’ Horizontal: 29° - 6° 50’ Min. Focusing Distance 1.2 m / 3.9 ft. Max. Magnification 0.21 × (at 300 mm) Field of View 364 × 545 - 113 × 169 m ...
-
Canon 4426B002 - page 16
© CANON INC. 2010 CT1-8568-001 C OP Y ...
¿Tienes una pregunta acerca de Canon 4426B002?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Canon 4426B002, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Canon 4426B002 probablemente compartirá una forma de solucionarlo.